• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1524-1526
• /
• 2005

This paper describes the measurement and analysis of the basic line constants in PLC(Power Line Communication) in the residential building. An apartment is considered as one of the conventional residences to get the line constants in this paper and Agilent 4263B LCR Meter is used to measure the detailed values each area and the specific results and the averaged analysis data are shown in the tables. The measured results no different from the calculated values with using conventional formula due to the line arrangement neglected factors, complex permittivity, and etc. Also, this paper describes many kinds of lines and wiring figures of domestic construction. Finally, it is utilized with the analyzed line characteristics in frequency domain as a planning reference of PLC.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1293-1302
• /
• 1999

In this paper, an on-line process scheme is presented for implementation of a intelligent on-line modeling of nonlinear complex system. The proposed on-line process scheme is composed of FNN-based model algorithm and PLC-based simulator, Here, an adaptive fuzzy-neural networks and HCM(Hard C-Means) clustering method are used as an intelligent identification algorithm for on-line modeling. The adaptive fuzzy-neural networks consists of two distinct modifiable sturctures such as the premise and the consequence part. The parameters of two structures are adapted by a combined hybrid learning algorithm of gradient decent method and least square method. Also we design an interface S/W between PLC(Proguammable Logic Controller) and main PC computer, and construct a monitoring and control simulator for real process system. Accordingly the on-line identification algorithm and interface S/W are used to obtain the on-line FNN model structure and to accomplish the on-line modeling. And using some I/O data gathered partly in the field(plant), computer simulation is carried out to evaluate the performance of FNN model structure generated by the on-line identification algorithm. This simulation results show that the proposed technique can produce the optimal fuzzy model with higher accuracy and feasibility than other works achieved previously.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.435-441
• /
• 2010

We report the preparation and characterization of a new and water soluble complex of palladium(II) with 1,10- phenanthroline and butyldithiocarbamate ligands. This compound has been studied through spectroscopic techniques, $^1H$ NMR, IR, electronic spectra and elemental analysis and conductivity measurements. The complex shows 50% cytotoxic concentration ($Ic_{50}$) value against chronic myelogenous leukemia cell line, K562, much lower than that of cisplatin. Thus the mode of binding of this complex to calf thymus DNA have been extensively investigated by isothermal titration UV-visible spectrophotometry, fluorescence, gel filteration and other methods. UV-visible studies show that the complex exhibits cooperative binding with DNA and remarkably denatures the DNA at extremely low concentration ($~13\;{\mu}M$). Fluorescence studies indicate that the complex intercalate into DNA. Gel filtration studies suggest that the binding of Pd(II) complex with DNA is strong enough that it does not readily break. In these interaction studies, several thermodynamic and binding parameters are also determined which may reflect the mechanism of action of this type of compound with DNA.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.128-135
• /
• 2015

The purpose of this study is to propose a planning method for increasing visitors' usage attraction by understanding user circulation in the large scale commercial complex. Focusing on the impact of anchor tenant on the pedestrian traffic arousing visitors' usage attraction flow, this study analyzed pedestrian circulation and traffic volume of Lotte World Mall, a large scale commercial complex. In this study, the change of pedestrian traffic in the commercial complex was investigated and the circulation flow of anchor tenant visitors such as movie theater in the commercial complex was simulated by computer. By analyzing both characteristics of pedestrian circulation and traffic volume in large scale commercial complex and movie theater users' pedestrian traffic with network-based computer simulation, positive relationship between pedestrian traffic to movie theater and pedestrian traffic dispersion of the whole commercial complex users was emerged. In addition, It is necessary to plan of distributing pedestrian traffic of vertical moving line in central space appropriately for using attraction function of anchor tenant.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.274-279
• /
• 2008

The significance of complexation facilities in Japan is to recognize the problems resulting from social/economic changes such as rapid informatization, globalization, low rates of birth, and aging population, and to strengthen the national competitiveness and urban advantages. Likewise, there have been increasing demands for community facilities that can meet the new requirements in terms of efficient administration and resident-centered administrative service system in line with changes in the society and administrative conditions. Thus, analyzed are cases concerning complex community facilities in Japan that have coped with changes in consciousness in the community earlier than in Korea. Specifically, the concept of modernday complex community facility is investigated, and the complexation of Korea Japan complex community facilities is divided to physical complexation and functional complexation to grasp the types. The complex community facilities are compared, and the characteristics in terms of spatial composition are also examined. The result of analyzing complex community facility cases is comprehensively analyzed to find out new possibilities in this regard.

• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.449-454
• /
• 2005

A waveguide method is developed to study the materials with relatively large dielectric constants at microwave range. Basically, the method is similar to the previous waveguide methods represented by short-circuit line and transmission/reflection measurement methods. However, the complex permittivity is not determined by the shift in resonance frequencies, but by numerical analysis of measured scattering parameters. In order to enhance microwave penetration into the specimen with relatively large permittivity, a dielectric plate with lower permittivity is employed for impedance matching. The influences of air gap between the specimen and waveguide wall are evaluated, and the corresponding errors are estimated. The propagation of higher order modes is also considered. Experimental results for several reference ceramics are presented.

• International Journal of Reliability and Applications
• /
• v.11 no.2
• /
• pp.107-122
• /
• 2010

This paper deals with the reliability analysis of a complex system, which consists of two subsystems A and B connected in series. Subsystem A has only one unit and B has two units $B_1$ and $B_2$. Marked process has been applied to model the complex system. Present reliability model incorporated two repairmen: supervisor and novice to repair the failed units. Supervisor is always there and the novice remains in vacation and is called for repair as per demand. The repair rates for supervisor and novice follow general and exponential distributions respectively and the failure time for both the subsystems follows exponential distribution. The model is analyzed under "Head of line repair discipline". By employing supplementary variable technique, Laplace transformation and Gumbel-Hougaard family of copula various transition state probabilities, reliability, availability and cost analysis have been obtained along with the steady state behaviour of the system. At the end some special cases of the system have been taken.

• Structural Engineering and Mechanics
• /
• v.84 no.5
• /
• pp.699-706
• /
• 2022

Settlement control techniques are critical for the safety of shield tunnel constructions, especially for facing complex situations. In this study, the shield tunnel structure from Huaita east road station to Heping Road station in Xuzhou metro No.3 line (China) is taken as engineering background, which has various complex problems of the upper-soft and lower-hard composite stratum conditions, twin curve shield tunnels, and underpass the foundation of the piled raft. The deformation characteristics of shield tunnelling passing through buildings are explored. Subsequently, comprehensive research methods of numerical simulation and field measurement are adopted to analyzing the effectiveness of settlement control by using the top grouting technique. The results show that the settlement of the buildings has obvious spatial characteristics, and the hysteresis effect can be obviously observed in soil deformation caused by shield construction. Meanwhile, the two shield constructions can cause repeated disturbances, reducing the soil deformation's hysteresis effect. Moreover, the shield tunnel's differential settlement is too large when a single line passes through, and the shield construction of the outer curve can cause more significant disturbance in the tunnel than the inside curve. Notably, the proposed process control parameters and secondary topgrouting method can effectively control the deformation of the shield tunnel, especially for the long-term deformation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.3
• /
• pp.111-115
• /
• 2012

Generally, brushless DC motor(BLDCM) driving system uses hall sensors or encoders as the mechanical position or speed sensor. It is necessary to achieve the informations of rotor position for driving trapezoidal type brushless DC motor without any position sensor. In this paper, the commutation signals are obtained without the motor neutral voltage, multistage analog filters, A/D converters, or the complex digital phase shift circuits which are indispensable in the conventional sensorless control algorithms. In the proposed method, in stead of detecting the zero crossing point of the nonexcited motor back electromagnetic force for the average motor terminal to neutral voltage, the commutation signal are extracted directly from the specific average line to line voltage with low-pass filter, adder and comparators circuit. In contrast to conventional methods, the neutral voltage is not need; therefore, the commutation signals are insensitive to the common mode noise. Moreover, the complex phase shift circuit can be eliminated. The effectiveness of the proposed method is verified through simulation results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1650-1669
• /
• 2017

In this study, each pixel in an ear is used as a centroid to generate a cake. Subsequently the major axis length of this cake is computed and obtained. This obtained major axis length serves as a feature to recognize an ear. Later, the ear hole is used as a centroid and a 16-circle template is generated to extract the major axis lengths of the ear. The 16-circle template extracted signals are used to recognize an ear. In the next step, a ring-to-line mapping technique is used to map these major axis lengths to several straight-line signals. Next, the complex plane vector computing technique is used to determine the similarity of these major axis lengths, whereby a solution to the image-rotating problem is achieved. The aforementioned extracted signals are also compared to the ones that are extracted from its neighboring pixels, whereby solving the image-shifting problem. The algorithm developed in this study can precisely identify an ear image by solving the image rotation and image shifting problems.