• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.707-714
• /
• 2010

When problems such as line fault, breakdown of a substation or a generator, etc. arise on the grid, the Microgrid is designed to be separated or isolated from the grid. Most existing DGs(Distributed Generators) in distribution system use rotating machine. However, new DGs such as micro gas turbine, fuel cell, photo voltaic, wind turbine, etc. will be interfaced with the Microgrid through an inverter. So the Microgrid may have very lower inertia than the conventional distribution system. By the way, the rate of change of frequency depends on the inertia of the power system. Moreover, frequency has a strong coupling with active power in power system. Because the frequency of the Microgrid may change rapidly and largely during transient, appropriate and fast control strategy is needed for stable operation of the Microgrid. Therefore, this paper presents a power balancing strategy in Microgrid during transient. Despite of strong power or frequency excursions, power balancing in the Microgrid can be maintained.

• Journal of KIISE:Information Networking
• /
• v.34 no.4
• /
• pp.239-245
• /
• 2007

New multimedia services over the cellular/WLAN overlay networks require different Quality of Service (QoS). In the cellular/WLAN overlay structure, the main issue of load balancing is to balance the available bandwidth among different networks. In this paper, we propose a new online network management scheme. Our proposed scheme is designed to improve bandwidth utilization by balancing the traffic load between the cellular network and WLANs. Simulation results indicate the superior performance of our proposed framework to strike the appropriate performance balance between contradictory QoS requirements under widely varying diverse traffic loads.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.51-56
• /
• 2008

A combination of VPNs and dial-up access, such as DSL and Cable, usually provides the cost-effective solution as the substitution of private networks on high-cost leased line. The business demand for high availability has increased with VPN spreading. This paper presents the schemes for a high availability of network access and a load balancing of network traffic in VPN gateways by using multiple links or multihoming capability based on active-active approach. The high availability and load balancing of network links can be achieved by duplicating external network access into multiple independent links. This can provide a continuous network connection to internal users even if one of the links is failed. Moreover, it can provide twice network bandwidth by distributing the traffic into the links. Static and dynamic algorithms are proposed as the load balancing algorithms.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.979-986
• /
• 2014

This study establishes basic data for operations management by organizing processes and measuring time in the mini line for female jackets to improve productivity, ensure competitiveness, and maintain operator competency and the line process flow balance between apparel manufacturing companies. The results of this study are as follows. Sewing operations are divided into preparation functions, arrangement, partial tasks, and assembly that consist of 84 processes. The results from time measurement indicate that 3238.41seconds (sec) were required to produce a single jacket and that the average time required for operators was 231.32 sec. A control limit was established to increase the reliability of the measured value for net time. After outside values were removed, the operation time was measured to be 3176.35 sec. This accounted for 98.08% of the total operation time, with net time decreasing by 62.06. Skill and effort level coefficients were applied to measure the operator performance, the total real time was calculated to be 3415. The requirement for preparation and arrangement operations were 1233.35 sec, and 2182.22 sec for partial tasks and assembly operations. Process separation and organization were performed after the bottleneck operation was selected to identify the maximum line balance. Consequently, process efficiency of preparation and arrangement operations increased from 79.19% to 93.00%, and the partial tasks and assembly operations increased from 62.36% to 90.93%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.38-44
• /
• 2005

Many mid-sized companies in Korean automotive industry have attempted to solve the lack of human power, to control the quality of components, to improve the production rate, and to innovate the manufacturing line. The goals of this study are to analyze the production rate of an automotive component manufacturing line using simulation software, to construct a Flexible Automation Subassembly (FAS) system and to suggest an optimized layout design using FAS line. In this research, the simulation model for manufacturing line was developed and used the realistic data of a medium sized company in Korean automotive industry. To complete this research, a simulation software 'ARENA' was used. This research analyzed the work distribution strategy and cycle time element for production flow and proposed an optimized layout to resolve line balancing problem which would bring the improved production rate.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.759-768
• /
• 1999

In this paper, we developed a simulation model of a car parts assembly line to improve the system performance such as worker's utilization balancing, productivity. This simulation model has been developed using QUEST, a true 3D discrete event simulation pakcage that is designed for modeling and analysis of manufacturing systems. We have suggested the results obtained to improve the system performances of an existing production line.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.215-215
• /
• 1998

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.7 s.196
• /
• pp.39-48
• /
• 2007

This paper presents a method of a line balanced assembly sequence generation based on the verification of a disassemblability and a work time. To derive the disassemblability for a part to be disassembled, first we inference collision free assembly directions by extracting separable directions fur the part. And we determine the disassemblability defined by the separability and stability cost. The separability cost represents a facility of the part disassembly operation, and the stability cost which represents a degree of the stability for the base assembly motion. Based upon the results, we propose a new approach of evaluating work time using neural networks. The proposed assembly sequence generation provides an effective means of solving the line balancing problem and gives a design guidance of planning assembly lay-out in flexible manufacturing application. Example study is given to illustrate the concepts and procedure of the proposed schemes.

• Journal of the military operations research society of Korea
• /
• v.22 no.2
• /
• pp.113-125
• /
• 1996

'Bowl Phenomenon' refers to allocating the work loads to middle stages slightly less than the outer ones in a series production system. Millier and Boling(1966) first discovered that the output rate of a production line were obtained by deliberately unbalancing, like a bowl-shape, under certain circumstances. So far quite a many researches have been studied either theory-oriented or simulation-oriented on this topic. However the papers concerning assemble production line are rather rare possibly due to the system complexity. In this paper, a simulation work on a 6-node assembly line has been conducted with the help of SLAMSYSTEM software. The simulation results have been turned out that 1) the Bowl phenemenon is still valid in the given system, 2) buffer storage between the work stations are critical measure for determining the degree of work-load unbalancing.

• IE interfaces
• /
• v.8 no.3
• /
• pp.259-267
• /
• 1995

A printed circuit board auto-insertion line consists of several processes of identical machines and produces several different types of PCBs. Each board must be processed by at most one machine in each process. So, we call it a flexible flow line. The load balancing is the one of the most important issues in the FFL which has many sequential processes. Therefore we have represented the job route selection model to balance the load of inter-process in the PCB auto-insertion line, and validated it by simulation.