• Journal of Microbiology and Biotechnology
• /
• v.20 no.2
• /
• pp.346-349
• /
• 2010

Coenzyme $Q_{10}$ ($CoQ_{10}$) production from Rhizobium radiobacter T6102 was monitored under various oxygen supply conditions by controlling the agitation speeds, aeration rates, and dissolved oxygen levels. As the results, the $CoQ_{10}$ production was enhanced by limited oxygen supply. To investigate whether the $CoQ_{10}$ production is associated with its physiological functions of electron carrier and antioxidant, the effects of sodium azide and hydrogen peroxide on the $CoQ_{10}$ production were studied, showing that the $CoQ_{10}$ contents were slightly enhanced with increasing sodium azide (up to 0.4 mM) and hydrogen peroxide (up to $10\;{\mu}M$) concentrations. These results suggest the plausible mechanism where the limited electron transfer stimulating the environments of limited oxygen supply and oxidative stress could accumulate the $CoQ_{10}$, providing the relationship between the $CoQ_{10}$ physiological functions and its regulation system.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.2
• /
• pp.100-104
• /
• 1995

Production of $poly-{\beta}-hydroxybutyrate$ (PHB) in a strain of Azotobacter chroococcum, a nitrogen-fixing bacteria, was investigated at various levels of nitrogen and oxygen. Feeding nitrogen source increased both cell growth and PHB accumulation. Oxygen supply appeared to be one of the most important operating parameters for PHB production. Both cell growth and PHB accumulation increased with the sufficient supply of air in the fed-batch fermentation of the strain. However, it was also noted that keeping the oxygen level under limited condition was critical to achieve high PHB productivity. A high titer of PHB (52 g/l) with a high cellular content (60%) was obtained after 48 hr of fed-batch operation by controlling the oxygen supply. Dual limitation of nitrogen and oxygen did not further increase the PHB accumulation probably due to the greater demand for reducing power and ATP for nitrogen fixation.

• The Korean Journal of Ecology
• /
• v.9 no.1
• /
• pp.19-24
• /
• 1986

Effects of temperature, pH, light-and-dark and degree of oxygen supply on germination of Papaver somniferum L. seeds were investigated. The optimum temperature of the germination was 2$0^{\circ}C$, but the germination was decreased as temperatures changed to the upper and lower. The largest elongation of both radicle and hypocotyl also occurred at 2$0^{\circ}C$. The best germination occurred at pH 7 but this decreased suddenly the above and below of that pH value. Although no effect of light-and-dark on the germination was, this was restricted under limited. oxyten supply in terms of underwater germination as compared with abovewater one.

• 한국연소학회:학술대회논문집
• /
• 1998.10a
• /
• pp.1-8
• /
• 1998

Waste combustion above a grate is the core process of incineration systems, stability of which should be guaranteed for emission minimization. However, complicated reactions and heat and mass transfer phenomena make understanding the process difficult. One dimensional bed combustor with a numerical combustion model is utilized to investigate the combustion process of the bed, using cubic wood particles as a simulated fuel. Bed combustion behavior is characterized with apparent flame propagation speed, which has close relationship with air supply rate and chemical and physical characteristics of the fuel. Base on the availability of oxygen, two distinct reaction zone is identified; the oxygen-limited and the reaction-limited zone leading to the extinction by excessive convection cooling. The numerical modeling shows good agreement with the experimental results. The transient bed combustion behavior of local temperature and oxygen consumption rate is adequately reproduced. The numerical model is extended to model the waste bed combustion of a commercial incineration plant, which shows meaningful results as well.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.307-311
• /
• 2004

The objective of this work is to evaluate the hypothesis that a good technique for supplying oxygen to the saturated zone in the presence of light nonaqueous phase liquid (LNAPL) pool contamination at the water table is to pass air through the unsaturated zone above the pool. This hypothesis was evaluated in experimental studies performed using a bench-scale, sand-tank reactor, Steady-state abiotic experiments in the sand-tank reactor with air flowing through the reactor headspace demonstrated that oxygen supply through the water table interface into the saturated zone was enhanced when an LNAPL (dodecane) pool was present at the water table. These experimental results confirmed the hypothesis that an LNAPL pool can serve as a high concentration oxygen source to the oxygen-limited area beneath the pool and, as a result, enhance the in situ biodegradation rate.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.123-131
• /
• 2002

In this paper, characteristics of cryogenic liquid oxygen was examined during cold flow of KSR-III main engine at each stage. The effect of venting was examined at the stage of cooling and at the pressurization stage, the interaction between nitrogen gas and liquid oxygen was also examined. The characteristic of liquid oxygen in the engine manifold was analyzed. The results showed that venting was the primary role at the cooling process and the interaction of nitrogen gas and liquid oxygen in the run tank is limited at the surface area. With the sampling rate of 1KHz static and dynamic pressure were measured in the rocket engine manifold and in the LOX supply equipment. 32.5mm and 38mm orifice were installed for the tests and pressure condition of liquid oxygen was 23Bar, 29Bar, 41Bar. Increase of orifice diameter and decrease of supply pressure reduced the perturbation of pressure in engine manifold.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.4
• /
• pp.287-294
• /
• 2006

Germination and early elongation of rice after germination were investigated in anoxic air treatment, nitric oxide gas treatment, and six concentrations of mercuric chloride solutions to determine the effects of limited oxygen environment, nitric oxide, and inhibited water flux through cell membrane in $17^{\circ}C$. Anoxic air treatment affected germination of tested six varieties very little. However root elongation rates were severely inhibited while shoot growth was affected less. Reductions in shoot and root elongations demonstrated genotypic variations. Nitric oxide delayed the germination of rice even though it didn't affect the final percent germination. Elongations of root and shoot were inhibited in nitric oxide treatment. The inhibitor effect of nitric oxide on the shoot elongation of rice was less severe, while nitric oxide completely inhibited the root emergence of rice. Concentrations of $HgCl_2$ greater than $300{\mu}M$ dramatically reduced the rate and percentage of germination when compared to distilled water treatment. The reduced percent germination showed the greatest variation among rice varieties in $500{\mu}M$ solution of mercuric chloride. Ansanbyeo, Jinheung, and Odaebyeo were affected less by $HgCl_2$, Nonganbyeo and Sangmibyeo were intermediate, and the germination of Andabyeo was greatly reduced by $HgCl_2$. Root elongation of germinated rice seedlings was more sensitive to oxygen deficits, nitric oxide, and $HgCl_2$ treatments than germination and shoot elongation. In conclusion, poor seedling establishment of rice sown in flooded paddy soils, in which the oxygen supply to the seeds is restricted, appears to the result of limited root elongation rate.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.89-93
• /
• 2002

Hydrogen - Oxygen gas has obtained from water electrolysis reaction. It is mixed gas havingconstant volume ratio 2:1 Hydrogen and Oxygen, and it is used as a source of thermal energy by combustion reaction. This gas has betterristics in the field of economy, efficiency of energy, and environmental intimacy than used both of acetylene gas and LPG for gas welding machin. So nowdays many studies of Water-Electrolyzed gas are progressed, and commercially used as a source of thermal energy for gas welding In the industry. For Water-Electrolyzed Source, it was used diode rectifier or SCR rectifier for get DC source. This method which is not looking to improve a source for impossible current control or voltage and limited control intervals. In this paper, it was relized and designed in source of pulse type for complementing existing-DC source type, also by experiment it was acquired producting characteristics of Hydrogen -Oxygen Gas through feature of source

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.257-262
• /
• 2002

Water-Electrolyzed gas is a mixed gas has the constant volume ratio 2 1 Hydrogen and Oxygen gained from electrolyzed water, and it has better characteristics in the field of economy, efficiency of energy, and environmental intimacy than acetylene gas and LPG used for existing gas welding equipment. So nowdays many studies of Water-Electrolyzed gas are progressed, and commercially used as a source of thermal energy for gas welding in the industry. For Water-Electrolyzed Source, it was used diode rectifier or SCR rectifier for get DC source. This method which is not looking to improve a source for impossible current control or voltage and limited control intervals. In this paper, it was relized and designed In source of pulse type for complementing existing - DC source type, also by experiment it was acquired producting characteristics of Hydrogen -Oxygen Gas through feature of source

• Transactions of the Korean hydrogen and new energy society
• /
• v.9 no.1
• /
• pp.1-7
• /
• 1998

Most of today's energy supply is obtained from fossil fuels. Despite of high energy density, higher store efficiency and long mileage, fossil fuels cause environmental pollution and their reserves are limited. In this study pure hydrogen gas and oxygen gas are burned without the emission of pollution. A gas turbine is used to obtain power. Water is injected into a combustor, which prevents overheating and recovers cooling heat. Excessively supplied water is recirculated. With variation of mass flow rate and equivalence ratio, the affection of water injection rate and the temperature of injected water on efficiency and power are experimented. Injected water gets cooling heat, is expanded from liquid to vapor and raises the thermal efficiency. It is enable to determine the rate of water injection, which makes the maximum power. The increase of temperature of water injection raises the efficiency of the system.