• Journal of The Korean Astronomical Society
• /
• v.41 no.3
• /
• pp.77-81
• /
• 2008

As a continuation of a previous work by Park et al. (2006), we have developed a two-element radio interferometer that can measure both the phase and amplitude of a visibility function. Two small radio telescopes with diameters of 2.3 m are used as before, but this time an external reference oscillator is shared by the two telescopes so that the local oscillator frequencies are identical. We do not use a hardware correlator; instead we record signals from the two telescopes onto a PC and then perform software correlation. Complex visibilities are obtained toward the sun at ${\lambda}\;=\;21\;cm$, for 24 baselines with the use of the earth rotation and positional changes of one element, where the maximum baseline length projected onto UV plane is ${\sim}\;90{\lambda}$. As expected, the visibility amplitude decreases with the baseline length, while the phase is almost constant. The image obtained by the Fourier transformation of the visibility function nicely delineates the sun, which is barely resolved due to the limited baseline length. The experiment demonstrates that this system can be used as a "toy" interferometer at least for the education of (under)graduate students.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.779-787
• /
• 2003

In this paper, we propose an improved early detection of all-zero DCT coefficients for fast video encoding. From the experimental observation, it is shown that the performance of the conventional method is limited because of the imprecision sufficient condition. When the calculation of the SAD in motion estimation is simply modified, more precise sufficient condition is derived from the theoretical analysis. Based on this idea, DCT and the quantization stages are effectively skipped in the proposed algorithm with no image degradation. The simulation results show that the proposed algorithm achieves computational saving over 10% compared to the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.696-704
• /
• 2003

In this paper, we propose an improved early detection of all-zero DCT coefficients for fast video encoding. From the experimental observation, it is shown that the performance of the conventional method is limited because of the imprecision sufficient condition. When the calculation of the SAD in motion estimation is simply modified, more precise sufficient condition is derived from the theoretical analysis. Based on this idea, DCT and the quantization stages are effectively skipped in the proposed algorithm with no image degradation. The simulation results show that the proposed algorithm achieves computational saving over 10% compared to the conventional method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.397-404
• /
• 2010

The use of equivalent circuit models of piezoelectric energy harvesters is inevitable when power circuitry including rectifying and smoothing circuit elements is connected to them for evaluating DC electrical outputs. This is because it is difficult to incorporate the electro-mechanical coupling resulting from the additional circuitry into the conventional finite element analysis. Motivated by this observation, we propose a method to accurately extract the equivalent circuit parameters by using commercially available FEM software such as ANSYS which provides three-dimensional AC piezoelectric analysis. Then the equivalent circuit can be analyzed by circuit simulators such as $SimPowerSystems^{TM}$ of MATLAB. While the previous works have estimated the circuit parameters by experimental measurements or by analytical solutions developed only for limited geometries and boundary conditions, the proposed method has no such limitation because piezoelectric energy harvesters of any shapes and boundary conditions can be treated in FEM software. For the verification of the proposed method, multi-modal AC electrical power output by using a corresponding equivalent circuit is compared with that by ANSYS. The proposed method is then shown to be very useful in the subsequent evaluation of DC electrical output which is obtained by attaching a bridge diode and a storage capacitor to a piezoelectric energy harvester.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.135-140
• /
• 2015

General CHMM vocabulary recognition system is model observation probability for vocabulary recognition of recognition rate's low. Used as the limiting unit is applied only to some problem in the phoneme model. Also, they have a problem that does not conform to the needs of the search range to meaning of the words in the vocabulary. Performs a phoneme recognition using GMM to improve these problems. We solve the problem according to the limited search words characterized by an improved k-means algorithm. Measure the effectiveness represented by the accuracy and reproducibility as compared to conventional system performance experiments. Performance test results accuracy is 83%p, and recall is 67%p.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.243-251
• /
• 2008

Magnesium alloys become popular research topic in last decade due to its light weight and relatively high strength-to-weight ratio in the energy aspiration age. Almost all structure materials are supposed to suspend stress. Magnesium is quite sensitive to corrosive environment, and also sensitive to environmental assisted cracking. However, so far we have the limited knowledge about the environmental sensitive cracking of magnesium alloys. The corrosion fatigue (CF) test was conducted. Many factors' effects, like grain size, texture, heat treatment, loading frequency, stress ratio, strain rate, chemical composition of environment, pH value, relative humidity were investigated. The results showed that all these factors had obvious influence on the crack initiation and propagation. Especially the dependence of CF life on pH value and frequency is quite different to the other traditional structural metallic materials. In order to interpret the results, the electrochemistry tests by polarization dynamic curve and electrochemical impedance spectroscopy were conducted with and without stress. The corrosion of magnesium alloys was also studied by in-situ observation in environmental scanning electron microscopy (ESEM). The corrosion rate changed with the wetting time during the initial corrosion process. The pre-charging of hydrogen caused crack initiated at $\beta$ phase, and with the increase of wetting time the crack propagated, implying that hydrogen produced by corrosion reaction participated in the process.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.4
• /
• pp.238-244
• /
• 2007

Nowadays many people are concerned about being healthy, and many dairy products are taken as health supplementary foods. Among dairy products, kefir, also called as Tibet mushroom, is a yogurt fermented by kefir grain, which is a mixture of lactic acid bacteria and yeasts. Although there are many empirical evidences that kefir is very influential for human body, the exact reason is not definitively discovered. Therefore, it would be useful to understand characteristics of a kefir grain and to categorize bacteria in a kefir grain. In this paper, molecular biological apparatus such as PCR, electrophoresis, PCR purification, DNA sequencing were used to identify and classify the species of lactic acid bacteria and yeast in a kefir grain. We used PCR-based identification method using 16S rRNA primer and Internal Transcribed Spacer (ITS) primer. We identified 6 different species which were selected on different medium. In addition, observation with scanning electron microscope (SEM) enabled us to grasp an external shape of the kefir grain. Although we found a limited number of microbial species, more intensive research are needed for extensive identification of microorganism species in Korean kefir grain.

• The Mathematical Education
• /
• v.42 no.2
• /
• pp.229-245
• /
• 2003

In this paper, we present a review of research perspectives and investigations in collegiate mathematics education from the four decades of development in the journal published by Korea Society of Mathematical Education. Research of mathematics education at the tertiary level, which had been a minor area in mathematics education, has made a significant development in the last decade in Europe md U.S.A. In this context, international journals for research in mathematics education were selected to comparatively examine and identify research trends and tasks in collegiate mathematics education. Based on the analysis of domestic at international journals, we present recommendations for further the development of Korean collegiate mathematics education research. First it is necessary to diversify the topics of educational research. Korean research of mathematics education at the tertiary level has been limited to the issues of curriculum developments, teacher education and computer technology. It is necessary to pursue more various topics such as conceptual development mathematical attitude and belief gender, socio-cultural aspect of teaching and teaming mathematics. Second, it is necessary to apply research methods for systematic investigations. It is important to note that international research of mathematics education introduces variety of research methods such as observation, interview, and survey in order to develop grounded theory of mathematics education. We end with pedagogical implications of the analyses presented and general conclusions concerning the perspectives for the future in collegiate mathematics education.

• Clinical and Experimental Pediatrics
• /
• v.54 no.3
• /
• pp.106-110
• /
• 2011

In pediatric patients with acute lymphoblastic leukemia (ALL), the Philadelphia chromosome translocation is uncommon, with a frequency of less than 5%. However, it is classified as a high or very high risk, and only 20-30% of Philadelphia chromosome-positive (Ph+) children with ALL are cured with chemotherapy alone. Allogeneic hematopoietic stem cell transplantation from a closely matched donor cures 60% of patients in first complete remission. Recent data suggest that chemotherapy plus tyrosine kinase inhibitors (TKIs) may be the initial treatment of choice for Ph+ ALL in children. However, longer observation is required to determine whether long-term outcome with intensive imatinib and chemotherapy is indeed equivalent to that with allogeneic related or alternative donor hematopoietic stem cell transplantation (HSCT). Reports on the use of second-generation TKIs in children with Ph+ ALL are limited. A few case reports have indicated the feasibility and clinical benefit of using dasatinib as salvage therapy enabling HSCT. However, more extensive data from clinical trials are needed to determine whether the administration of second-generation TKIs in children is comparable to that in adults. Because Ph+ ALL is rare in children, the question of whether HSCT could be a dispensable part of their therapy may not be answered for some time. An international multicenter study is needed to answer the question of whether imatinib plus chemotherapy could replace sibling allogeneic HSCT in children with Ph+ ALL.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1606-1609
• /
• 2002

MAC state models appeared with an effort to overcome technical demerits of CDMA in provisioning packet data service. In the scenario of sojourn and transition on MAC states, the design of state sojourn time is a critical issue for an efficient utilization of limited recource; a longer sojourn time leads to more resource being preserved for inactive stations, while more connection components should be recovered with a shorter sojourn time. Thus, the sojourn time at each MAC state must be optimized in consideration of these two conflicting arguments. In this paper, we first present a generic MAC state model. Secondly, based on the generic model, we reveal a relation of inactive period and the delay time of the last packet served in pre- ceding active period and specify a loss function reflect-ing two antinomic features that result from a change of state sojourn time. Using the proposed loss function, we construct a decision problem to find an optima3 rule for state sojourn times. Finally, we present a way of computing Bayes rule by use of the posterior distribution of inactivity duration for given observation on the delay time of last packet. Furthermore, Bayes rules are explicitly expressed for special arrival processes and investigated with respect to traffic load and loss parameters.