• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.122-131
• /
• 2020

To reduce emissions from coal-fired power plants, researchers focusing on coal and biomass co-firing technology. Biomass, with its carbon-neutral nature and lower quantities of nitrogen and sulfur compared with coals, has a positive impact on coal-fired power generation. Many studies on the combustion of biomass have been conducted, but the study on the combustion characteristics of biomass char is limited. FERPM predicts char combustion characteristics with high accuracy by introducing experimental data-based parameters of biomass char and has not yet been applied in numerical simulation. In this study, FERPM is numerically applied to char combustion of wood pellets representing wood-based biomass and the combustion characteristics are compared with the kinetic/diffusion limited model, intrinsic model, and diffusion limited model.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.839-846
• /
• 2013

This paper describes a finite element model of the microstructure of dispersion type nuclear fuels, which can be used to determine the effective thermal conductivity of the fuels during irradiation. The model simulates a representative region of the fuel as a prism shaped unit cell made of brick elements. The elements within the unit cell are assigned material properties of either the fuel or the matrix depending on position, in such a way as to represent randomly distributed fuel particles with a size distribution similar to that of the as manufactured fuel. By applying an appropriate heat flux across the unit cell it is possible to determine the effective thermal conductivity of the unit cell as a function of the volume fraction of the fuel particles. The presence of a fuel/matrix interaction layer is simulated by the addition of a third set of material properties that are assigned to the finite elements that surround each fuel particle. In this way the effective thermal conductivity of the material may also be determined as a function of the volume fraction of the interaction layer. Work is on going to add fission gas bubbles in the fuel as a fourth phase to the model.

• Geomechanics and Engineering
• /
• 제30권6호
• /
• pp.525-538
• /
• 2022

This paper presents a more general model for T-shaped combined footings that support two columns aligned on a longitudinal axis and each column provides an axial load and two orthogonal moments. This model can be applied to the following conditions: (1) without restrictions on its sides, (2) a restricted side and (3) two opposite sides restricted. This model considers the linear soil pressure. The recently published works have been developed for a restricted side and for two opposite sides restricted by Luévanos-Rojas et al. (2018a, b). The current model considers the uniform pressure distribution because the position of the resultant force coincides with the center of gravity of the surface of the footing in contact with the soil in direction of the longitudinal axis where the columns are located. This paper shows three numerical examples. Example 1 is for a T-shaped combined footing with a limited side (one column is located on the property boundary). Example 2 is for a T-shaped combined footing with two limited opposite sides (the two columns are located on the property boundary). Example 3 is for a T-shaped combined footing with two limited opposite sides, one column is located in the center of the width of the upper flange (b₁/2=L₁), and other column is located at a distance half the width of the strip from the free end of the footing (b₂/2=b-L₁-L). The main advantage of this work over other works is that this model can be applied to T-shaped combined footings without restrictions on its sides, a restricted side and two opposite sides restricted. It also shows the deficiencies of the current model over the new model.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권11호
• /
• pp.1795-1806
• /
• 2018

Objective: The study was designed to establish choline deficiency model (CDM) in broilers for evaluating efficacy of polyherbal formulation (PHF) in comparison with synthetic choline chloride (SCC). Methods: A total of 2,550 one-day-old Cobb 430 broiler chicks were randomly assigned to different groups in three experiments. In experiment 1, G1 and G2 served as normal controls and were fed a basal diet with 100% soybean meal (SBM) as a major protein source supplemented with and without SCC, respectively. In G3, G4, G5, and G6 groups, SBM was replaced at 25%, 50%, 75%, and 100% by soy protein isolate (SPI) to induce a graded level of choline deficiency. In experiment 2, PHF (500 and 1,000 g/ton) in comparison with SCC (1,000 g/ton) were evaluated. In experiment 3, dose-response of PHF (200, 400, and 500 g/ton) with SCC (400 g/ton) was determined. Results: Replacement of SBM by SPI produced a linear decrease in body weight gain (BWG) with a poor feed conversion ratio (FCR). 25% SBM replacement by SPI yielded an optimum negative impact on BWG and FCR; hence, it is considered for further studies. In experiment 2, PHF (500 and 1,000 g/ton) and SCC (1,000 g/ton) showed a similar performance in BWG, FCR and relative liver weight. In experiment 3, PHF produced an optimum efficacy at 400 g/ton and was comparable to SCC in the restoration of serum aspartate aminotransferase activity, abdominal fat, breast muscle lipid content and liver histopathological abnormalities. Conclusion: Replacement of SBM by SPI caused choline deficiency characterised by worsening of BWG, FCR, elevation in liver enzymes and histopathological changes indicating fatty liver. CDM was found valid for evaluating SCC and PHF. It is concluded that PHF has the potential to mimic biological activities of SCC through the restoration of negative effects caused by CDM.

• Advances in concrete construction
• /
• 제16권1호
• /
• pp.21-34
• /
• 2023

This work presents a complete optimal model for trapezoidal combined footings that support a concentric load and moments around of the "X" and "Y" axes in each column to obtain the minimum area and the minimum cost. The model presented in this article considers a pressure diagram that has a linear variation (real pressure) and the equations are not limited to some cases. The classic model takes into account a concentric load and the moment around of the "X" axis (transverse axis) that is applied due to each column, i.e., the resultant force is located at the geometric center of the footing on the "Y" axis (longitudinal axis), and when the concentric load and moments around of the "X" and "Y" axes act on the footing is considered the uniform pressure applied on the contact surface of the footing, and it is the maximum pressure. Four numerical problems are presented to find the optimal design of a trapezoidal combined footing under a concentric load and moments around of the "X" and "Y" axes due to the columns: Case 1 not limited in the direction of the Y axis; Case 2 limited in the direction of the Y axis in column 1; Case 3 limited in the direction of the Y axis in column 2; Case 4 limited in the direction of the Y axis in columns 1 an 2. The complete optimal design in terms of cost optimization for the trapezoidal combined footings can be used for the rectangular combined footings considering the uniform width of the footing in the transversal direction, and also for different reinforced concrete design codes, simply by modifying the resisting capacity equations for moment, for bending shear, and for the punching shear, according to each of the codes.

• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.21-27
• /
• 2006

We present and analyze a class of limited sensing random access algorithms with powerful properties. The algorithms are implementable in wireless mobile environments and their operational properties are simple. Their throughput in the worst case of the limit Poisson user model is 0.4297, while this throughput degrades gracefully in the presence of channel feedback errors.

• East Asian mathematical journal
• /
• 제31권5호
• /
• pp.707-716
• /
• 2015

We consider a queueing system with N-limited nonstop forwarding. In this queueing system, when the server breaks down, up to N customers can be serviced during the repair time. It can be used to model an assembly line consisting of several automatic stations and a manual backup station. Within the framework of $Geo^X/D/1$ queue, the matrix analytic approach is used to obtain the performance of the system. Some numerical examples are provided.

• 품질경영학회지
• /
• 제36권2호
• /
• pp.20-27
• /
• 2008

Tolerance design has been identified as an important research area and a number of models have been proposed in the literature. This paper investigates the effect of limited capacity on tolerance design for products with nominal-the-best type (N-type) quality characteristics. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are identically and independently distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal tolerance limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• 품질경영학회지
• /
• 제36권4호
• /
• pp.77-86
• /
• 2008

Due to the rapid growth in automated testing and manufacturing systems, screening inspection becomes very attractive. In this paper, we investigate the effects of limited capacity on screening inspection using a surrogate variable. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are independently and identically distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal screening limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• 산업기술연구
• /
• 제29권B호
• /
• pp.33-39
• /
• 2009

The need for end-to-end security has been increased with the widespread use of mobile devices in wireless internet access applications such as mobile commerce. The WAP1.x has an end-to-end security problem that the message transmitted between the mobile device and the Web server is decrypted inside the gateway within a short time. To overcome this problem, several protocols including WAP2.0 has been proposed. These protocols require that the heavy modules such as TLS or data compression modules should be installed on the mobile device with limited resources. This paper proposes a new WTLSW(WTLS-TLS at Web server) protocol and a new WAP2.0 proxy model in order to ensure end-to-end security between the mobile device and the Web server and to be appropriate for mobile devices with limited resources.