• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.31
• /
• pp.91-98
• /
• 1994

Most of machines are physically or chemically degenerated by continuous usage. There- fore, a preventive maintenance is necessary. Producing defects are caused by process shift in mean and variance which are due to three types of degeneration. We develope the function of process variance from the experimental data and determine the optimal tool wear limit and the initial setting position of tool by considering the percent defective cost and the preventive maintenance cost.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.685-694
• /
• 2005

Korean practices in tolerance setting of pesticide residues on food crops were compiled with an effort to harmonize with international standards. Based on scientific data including historical background, limit setting protocols, adoption of ADI values, food factors, nation's body weights, and regulatory margins which are required for the setting of maximum residue limits, necessary measures to be taken by Korean regulatory authorities were proposed.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.45-55
• /
• 2005

This study was undertaken to find out necessary measures to improve the tolerance setting system of pesticide residues on food crops in Korea which is scientifically reasonable and harmonizable with international standards. Information on tolerance setting systems of pesticide residues by Codex Alimentarius Commission, Joint FAO/WHO Meeting of Experts on Pesticide Residues, USA, EU, Japan and Taiwan was collected and analyzed. On the basis of information in the above countries, necessary actions to be taken by the Korean regulatory authorities were recommended with respect to priority setting, maximum residue limits (MRLs) setting based on field residue data, group MRLs, minor crop problems, quantitation limit and dietary intake assessment.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.692-698
• /
• 1999

This paper analyzes the effect of DGS(Dispersed Generation System) on the voltage regulation of the traditional distribution system of which the voltage is controlled by the bank LDC(Line Drop Compensator). Through the simulation results for 22.9kV class distribution system with DGSs, some general relationships among the operating power factor and introduction limit of DGS, and the sending-end reference voltage determined by internal setting coefficients of the LDC are derived. Those relationships are that the introduction limit of DGS increases as the power factor of DGS goes from lagging to leading and also as the allowance of the sending-end reference voltage increases. From the relationships, a operation method of the power distribution system integrated with DGSs is proposed from the view point of the operating power factor of DGS and new voltage regulation method.

• Fire Science and Engineering
• /
• v.2 no.1
• /
• pp.21-28
• /
• 1988

This paper deals with the optimal use of the ELB (Electric Leakage circuit Breaks) for the protection of low voltage distribution system. Since the ELB is recently used together for grounding fault while only the ground resistance was used in the past, the analysis of ELB characteristics is indispensible. By the quantitative analysis and the setting of limit the ground resistance and the ELB is derived and then the optimal use of the ELB is expected to contribute to the system protection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.47-54
• /
• 2019

In the worldwide, The issue comes up which is the danger of car accidents from climate-change effects. We are considering about various types of speed limit signs for setting restricts to high-speed vehicles. South Korea has 4 seasons in the land. At Summer or Winter seasons have heavy rains and fogs or snow, In these seasons need to enforce speed limit laws or methods to prevent car collision. But South korea is using stationary speed limiters that is not enough to proof against rear-end car accidents in these climates. In this paper shows the necessity of independent LED speed limits display to reduce car accidents. And explaining the prototype model which is a combination of rain sensor and wiper systems. This model is independently changed the speed limits to 50%, 80%, 100% of standards by raindrops and snowflake. Also it is freely setting speed limits on each places anywhere it settled in. Visual effects of the model as being speed-down of vehicles helps to prevent rear-ending car accidents and traffic beforehand.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.40
• /
• pp.233-240
• /
• 1996

A fixed amount compensator is proposed for a process with a linear tool wear function. A Cost model is constructed which involve process adjustment cost and quality loss. Symmetric and asymmetric quadratic functions of the deviation of a quality measurement from the nominal target value are considered as the quality loss functions. Methods of finding optimal values of initial setting and compensation limit are presented and a numerical example is given.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.95.5-95
• /
• 2002

Tool condition monitoring is recognized important in CNC machining processes since the excessive wear or breakage of tool has to be noticed immediately in an automated manufacturing system to keep the quality and productivity. In this research, as an economic way of detecting the status of tool change, the wavelet transform has been applied to the measurement of spindle motor current. The energy of a specific level shows the difference between a normal tool and worn one. By setting a limit on the change of energy, it is possible to notify the time to inspect the tool.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.145-151
• /
• 2009

The span deflection among the monitoring items of bridge measurement system in real time is representative behaviour and important index of superstructure condition. the limit of span deflection in Standard Specifications for Highway Bridge in Korea has been applied to the method that is making the management-criteria for span deflection in bridge measurement system. But the limit concern mainly serviceability of divers. So it is difficult to find the safety factor of the limit from the viewpoint of bridge safety. This study estimated the safety factor of the limit of span-deflection in Standard Specifications for Highway Bridge in Korea from the viewpoint of bridge safety by the indoor structural test.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.144-155
• /
• 2018

As the public interest in environmental issues increased, the "Act On The Integrated Control Of Pollutant-Discharging Facility" was enacted. Through the integrated environmental pollution prevention act in which 19 industries with large environmental impacts are sequentially applied, pollutants can be managed in a medium-integrated manner and integrated permission of the business unit is possible and BAT can be applied to enable a scientific and proactive environmental management system. In addition, if the facility with BAT works normally, the pollutant emission is offered with the range of lower limit to upper limit. This study analyzed the overview of Best Available Techniques-Associated Emission Levels (BAT-AEL), and its setting procedure and method, and then suggested the BAT-AEL of a waste incineration facility. In comparative analysis on Emission Limit Values (ELVs) of EU, this study tries to propose improvement matters and development directions if the relevant standard is revised.