• Water for future
• /
• v.29 no.6
• /
• pp.189-201
• /
• 1996

The main objective of this study is to determine the time distribution models of rainfall in Korea for estimating design floods and to suggest new runoff model(Geomorphologic Instantaneous Unit Hydrograph; GIUH) in order to be easily use the rainfall-runoff model put rainfall models practice to be suitable for the regional characteristics of hydrologic situation by practicing engineers. As a result, the reappearance of triangular hyetograph and GIUH runoff model showed promising. The historical data from about 13,000 event-rainfalls and 73 rainfall-runoff measuring data during 12 years in International Hydrological Program (IHP) basins have been used to determine the statistical factors of the time distribution for rainfalls by the Yen-Chow, Huff, Pilgrim-Cordery and Mononobe models. The Rational, Kajiyama, Nakayasu and Clark model and GIUH model that this study runoff model were used for the purpose of application limit for basin area against design concept by the estimation of flood runoff and the derivation of empirical equations to estimate the parameters for ungaged basins.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.8
• /
• pp.1340-1346
• /
• 2016

Utilization of Distributed Generations (DGs) using Renewable Energy Sources (RESs) has been constantly increasing as they provide a lot of environmental, economic merits. In spite of these merits, some problems with respect to voltage profile, protection and its coordination system due to reverse power flow could happen. In order to analyze and solve the problems, accurate modeling of DG systems should be preceded as a fundamental research task. In this paper, we present a PhotoVoltaic (PV) generation system which consists of practical PV cells with series and parallel resistor and an inverter for interconnection with a main distribution system. The inverter is based on controllable current source which is capable of controlling power factors, active and reactive powers within a certain limit related to amount of PV generation. To verify performance of the model, a distribution system based on actual data is modeled by using ElectroMagnetic Transient Program (EMTP) software. Computer simulations according to various conditions are also performed and it is shown from simulation results that the model presented is very effective to study DG-related researches.

• Journal of Drive and Control
• /
• v.12 no.3
• /
• pp.18-24
• /
• 2015

The plug-in hybrid electric vehicle has a high fuel economy and can be driven long distances. Its different modes include the electric vehicle, hybrid electric vehicle, and only engine operating mode. A power management strategy is important to determine which mode should be selected. The strategy makes the vehicle more efficient using appropriate power sources for driving. However, the strategy usually needs a driving speed profile which is future driving cycle. If the profile is known, the strategy easily determines which mode is driven efficiently. However, it is difficult to estimate the speed profile for a real system. To address this problem, this paper proposes a new power distribution strategy using a neural network. The average speed and driving range are used as input parameters to train the neural network system. The strategy determines a limit for the use of the battery and the desired power is distributed between the engine and the motor simultaneously. Its fuel economy can increase by improving the basic strategy.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.813-820
• /
• 2001

The Safety depressurization System(SDS) of KNGR prevents RCS from overpressurization by discharging high pressure and temperature coolant through the I-sparger into the IRWST during an accident. If IRWST water temperature rise locally, around the sparger, beyond $200_{\circ}$2000 F by the discharged coolant, unstable steam condensation can cause large pressure load on the IRWST wall. To investigate whether this condition can be avoided for the design basis event IOPOSRV(Inadvertent Opening of one Pilot Operated Safety Relief Valve), the flow and temperature distribution of water in the IRWST is calculated by using CFX 4.3 computational fluid dynamic code. According to the results, since pool water temperature does not exceeds temperature limit within 50 seconds after the opening of one POSRV, it can be assured that the integrity of IRWST wall is maintained.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.2
• /
• pp.88-93
• /
• 1981

The three force components of shear spinning are calculated by a newly proposed deformation model. The spinning process is understooed as shearing deformation arter uniaxial yuelding by ending, and shear stress .tau.$\sub$rz/ becomes .kappa. the yueld limit in pure shear, in the deformation zone. The tangential forces are calculated and then the feed forces and normal foeces are obtained by assuming a nuiform distribution of roller pressure on the contact surface. An optimum contact area is obtaned by minimizing the bending energy required to obtain the assumed deformation mechanism. The calculated forces are compared with experimental data form published literature and present experiments. Good agreement cetween calculated and experimental values for working forces is obtained over a wide range of process variables.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.37-44
• /
• 1998

Lean burn combustion is an important concept for improving the fuel consumption and exhaust emissions. However, the lean burning is associated with increased cycle-to-cycle combustion variations due to the ignition instabilities and redu- ced flame propagation rates. Engine stability under lean mixture conditions could be improved by increasing flame speed through enhanced flow characteristics and by securing ignitability with improvement of ignition systems. The effects of flow motion and ignition characteristics on the combustion performances were investigated in a 4-valve SI engine. Flow motions of tumble-swirl were varied with a swirl control valve attached at the inlet ports, while ignition energy and its distribution were controlled in a high -frequency ignition system by changing spark duration and spark frequency. The improvement of lean burn performance by the optimum flow motion and ignition characteristics is discussed.

• Journal of the Korean Statistical Society
• /
• v.24 no.1
• /
• pp.141-147
• /
• 1995

A diffusion model for a system subject to random shocks is introduced. It is assumed that the state of system is modeled by a Brownian motion with negative drift and an absorbing barrier at the origin. It is also assumed that the shocks coming to the system according to a Poisson process decrease the state of the system by a random amount. It is further assumed that a repairman arrives according to another Poisson process and repairs or replaces the system i the system, when he arrives, is in state zero. A forward differential equation is obtained for the distribution function of X(t), the state of the systme at time t, some boundary conditions are discussed, and several interesting characteristics are derived, such as the first passage time to state zero, F(0,t), the probability of the system being in state zero at time t, and F(0), the limit of F(0,t) as t tends to infinity.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.05a
• /
• pp.153-158
• /
• 2003

Design of general steel structure had applied and achieve elastic design concept mainly so far. Because elastic design supposes that whole structure complies with elasticity formula as that achieve via allowable stress of material is concept that calculate stress distribution of construction about action external load and estimate load of when the maximum stress reaches equally with allowable stress that is established beforehand by maximum safety load of the structure. But, absence that compose actuality structure by deal with external load increase small success surrender and structure hardness falls and tell structure in limit state finally on the whole as showing complicated conduct by interference between these breakdown at buckling by compression. Examined closely about conduct of place since initial buckling through carbon vocal cords transformation finite element analysis series (ANSYS) that place mending condition supposes case that is boundary condition in this investigation.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.75.3-75.3
• /
• 2017

We Investigate dust stripping of Virgo cluster galaxies that are known to suffer HI gas stripping. The gas stripping phenomena of these galaxies may result from either ram pressure induced by the hot intracluster medium or gravitational tidal interactions between galaxies. While much efforts have been made to directly detect gas removed from cluster galaxies, the spatial distributions of dust, which should also be affected, are hardly known. Several previous studies have tried to directly detect the morphology of gas or dust using radio or infrared observations, but such approaches are hard to widely apply because of the limit of observational resolution and sensitivity. In this study, we try a different approach using optical data: measuring the background galaxy reddening by the dust stripped from the Virgo cluster members. Based on optical color excess maps of the background galaxies, we compare the ambient dust distribution with the HI morphology of the Virgo galaxies. We discuss how efficiently dust stripping can be detected with this method and how the stripped dust is associated with the removed gas according to HI gas stripping stage over the sample.

• Applied Microscopy
• /
• v.45 no.2
• /
• pp.52-57
• /
• 2015

Bulk metallic glass (BMG) shows higth strength, high elastic limit, corrosion resistance and good wear resistance and soft magnetic properties and has been considering as a candidate for new structural materials. But they show limited macroscopic plasticity and lack of tensile ductility due to highly localized shear deformation, which should be solved for real structural application. In this paper researches on the enhancement of plasticity of BMG were reviewed briefly. Introducing heterogeneous structure in glass is effective to induce more shear transformation zones (STZs) active for multiple shear band initiation and also to block the propagating shear band. Several methods such as BMG alloy design for high Poisson's ratio, addition of alloying element having positive heat of mixing, pre-straining BMG and variety of BMG composites have been developed for homogenous distribution of locally weak region, where local strain can be initiated. Therefore enhancement of plasticity of BMG is normally accompanied with some penalty of strength loss.