• Advances in Computational Design
• /
• v.1 no.3
• /
• pp.221-234
• /
• 2016

The present study dictates the behavior of shear wall under a seismic event in slender high rise buildings, and studies the effect of height, location and distribution of shear wall in slender high rise building with and without boundary elements induced by the effect of an earthquake. Shear walls are located at the sides of the building, to counter the earthquake forces. This study is carried out in a 12 storeys building using SAP2000 software. The obtained results disclose that the behavior of the structure is definitely affected by the height and location of shear walls in slender high rise building. The stresses are concentrated at the limit between the shear wall region and the upper non shear wall especially for shear walls without columns. Displacements are doubled between the shear wall region and the upper non shear wall especially for shear walls without columns.

• Journal of the Korean Statistical Society
• /
• v.23 no.2
• /
• pp.483-498
• /
• 1994

Suppose that a stationary process ${X_t}$ has a marginal distribution whose support consists of sufficiently large integers. We are concerned with some analogous law of large numbers for such distribution function F. In particular, we determine a weak law of large numbers for maximum queueing length in $M/M\infty$ system. We also present a limiting behavior for the maxima based on AR(1) process with binomial thining and poisson marginals (INAR(1)) introduced by E. Mckenzie. It turns out that the result of AR(1) process is the same as that of $M/M/\infty$ queueing process in limit when we observe the queues at regularly spaced intervals of time.

• The Korean Journal of Zoology
• /
• v.36 no.2
• /
• pp.175-180
• /
• 1993

Eighty one specimens of nhodeus sericeus (Pallas, 1176) were collected at the upper stream of the Som River (37$^{\circ}$32' 38" N, 127$^{\circ}$58' 57" E: Maegok-ri, Konggun-myon, Hoengsong-gun, Kanguvon-do, Korea) which is a tributary of the Namhan River. This is the first report of the species in the southern part of the Korean Peninsula. This species is well discriminated from the other species in the genus nhodeus by the following respects. The number of scales of transverse series is more than 34 (range 34-37, mean 35.7 $\pm$0.7). Head is echo감or and snout is Bonder than those of the other species. The upper part of the eve is always black and the lateral body surfaces are reddish purple. It had been hem that the southern limit of the distribution of Rhodeus sericeus was the Yonghung River in Hamgvongnam-do, north-eastern part of the Korean Peninsula. But their distributional range is extended more southerly to the Han River system which tons westward through the central part of the Korean Peninsula.Peninsula.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.718-719
• /
• 2011

Lately, the demand for electrical power has been significantly increased. As a result a power transmission system has been improved. On the other hand fault current increased more than past. Superconducting fault current limiter (SFCL) is one of the solutions to limit fault current. However, SFCL's research has not advanced in a power transmission system fully. Therefore, we studied effect of SFCL in a power transmission system. The power distribution system is open-loop circuit, but a power transmission system is closed-loop system. Consequently, Fault current in a power transmission system is larger than fault current in a power distribution system. we exerimented a simple closed-loop power transmission system circuit.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.259-261
• /
• 2002

Recently, according to the spread of semiconductor applied technology like motor speed control contrivance, power conversion installation and so on, harmonic ingredients occurred in switching operation flow into a distribution system and increase voltage distortion of distribution system and bring on obstacles like damage, lowering of capability, false operation and so on of various electrical installation. So, in order to consider a countermeasure to limit occurrence quantity of harmonic source, harmonic interception and others, precision measurement and analysis on voltage, current, power, power factor, the each ingredient of harmonic order, the percentage of total harmonic distortion and so forth are needed. In this paper monitoring system to measure and analyze power quality connected with power harmonics was developed and it's performance is verified by measuring and analyzing three-phase voltage and current of R, S, T in the three-phase and four-wire system using the developed measurement system.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.2 s.63
• /
• pp.47-52
• /
• 2005

This paper introduces a procedure for free span and fatigue analysis of offshore pipelines per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were established to calculate the allowable span lengths in the new design codes. The screening criteria allows a certain amount of vortex-induced vibration due to wave and current loading. However, the induced pipe stresses are very small and usually below the limit stresess of typical S-N curves. In contrast, the conventional criteria did not allow any vortex-induced vibration in the free span of pipelines. Thus, the screening criteria yields reduced allowable span lengths. A simplified procedure was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions. Comparisons with conventional criteria are included.

• Transactions of Materials Processing
• /
• v.13 no.8
• /
• pp.671-677
• /
• 2004

For the large reduction in tube cross section, the tube drawing process is usually performed by two successive passes, so called first drawing and second drawing. In multi-pass drawing process, the reduction balance is important to prevent drawing cracks. Therefore in this study, the model for uniform reduction distribution in two-pass drawing process has been developed on the basis of cross sectional variation of drawn tube. For the given product geometry the model provides optimal diameter and thickness that can evenly distribute drawing reductions. The capability of model is well confirmed by finite element analysis of tube drawing process. Criteria curves at various limit strains to determine whether the drawn tube would fail during drawing process are also proposed by using newly developed model.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.4
• /
• pp.273-284
• /
• 2002

At present, the health risks associated with the natural radionuclides of ground water have become a concern as potential social problems. However, there are no regulatory actions or control strategies for such risks. Therefore, we have investigated and discussed the risks and associated management strategies for radionuclides in other countries. US EPA has proposed MCL (300 pCi/L) and AMCL (4,000 pCi/L) for radon, and 30 ppb for uranium, 15 pCi/L for gross-alpha and 5 pCi/L for radium as final MCLs. Also, Canada, WHO and European countries have their inherent management levels. Finally, we suggested several criteria for setting guidelines in our countries including exposure related criteria such as geological distribution, occurrence, exposure probability distribution, exposure population and multimedia exposure assessment, acceptable risk, and cost -benefit analysis. The national-scale exposure and risk assessment, and economic analysis should be conducted for producing and aggregating the representative information on these criteria.

• Computers and Concrete
• /
• v.6 no.6
• /
• pp.505-521
• /
• 2009

The analysis of prismatic members made of reinforced concrete under inclined bending, especially the computation of ultimate loads, is a pronounced non-linear problem which is frequently solved by discretizing the stress distribution in the cross-section using interpolation functions. In the approach described in the present contribution the exact analytical stress distribution is used instead. The obtained expressions are integrated by means of a symbolic manipulation package and automatically converted to optimized Fortran code. The direct problem-computation of ultimate internal forces given the position of the neutral axis-is first described. Subsequently, two kinds of inverse problem are treated: the computation of rupture envelops and the dimensioning of reinforcement, given design internal forces. An iterative Newton-Raphson procedure is used. Examples are presented.

• Journal of Distribution Research
• /
• v.7 no.2
• /
• pp.21-44
• /
• 2003

The entry of large discount stores into small cities such as Choonchun or Wonju have had a profound impacts on the businesses of small-sized retailers. The impacts of the entry by large discount store will be much larger than those of the entry by department store or other small-scale retailers. Most of research studies on the competitive retail structure focused on the change of retailing in the advanced countries dynamically and investigated macro-trends in sales and market share. As a result, they tend to overlook the micro aspects of consumers" perception and actual behaviors. Furthermore, they tend to limit their research scopes to relatively competitive retailers not to overall competitive structures. In this study, we analyze the overall competitive structures by investigating the retailers" characteristics, perceptions of consumers on retailers and actual purchase of products across different types of retailers We could obtain competitive retail structure. Based on that, we discuss the strategies on the revitalization and enhancement of small-sized retailers" productivities.