• Journal of Mechanical Science and Technology
• /
• v.14 no.4
• /
• pp.369-379
• /
• 2000

In industrial production-distribution systems, production and purchasing rates, associated inventories, and sales are very critical for the profits of each component in the system. The objective of this study is to investigate an effective information control scheme for a production -distribution system by automatic feedback control techniques. In this work, a dynamic control scheme that has an integrated -error with state-feedback and filtering (ISFF) is proposed as a new algorithm for a dynamic controller. Generalized formulations of the dynamic control are proposed in the continuous-time and discrete-time cases. A methodology for an evaluation of ISFF controller gains using the eigen structure property is presented. When an upper-limit is imposed on the production capability by available factory space and capital equipment, supervisory control is provided to avoid integrator-windup and deterioration of system performance.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.2
• /
• pp.1-8
• /
• 2002

The aim of this study was to generate systemic data for the aquatic plant distribution according to water depth and crossing slope in the shoreline. The results of this study were as follows; 1. Anxiety to 0 near area Bidens frondosa, Scirpus tabernaemontani, Carex dispalata etc. total class 21 observe, and Phragmites communis, Iris pseudoacorus etc. class 6 of anxiety 0-70cm extent examined. Class 21 of anxiety observed all such as Bidens frondosa, Scirpus tabernaemontani, Carex dispalata in near area to 0, and Phragmites communis, Iris pseudoacorus etc. class 6 of anxiety 0-70cm extent examined. Anxiety 70-100cm extent Nymphoides indica, Ttapa japonica etc.. class 2 appeared to line Zizania latifolia, Typha angustata back 2 papers, 130cm and examined that Nelumbo nucifera was limit anxiety state 230cm. 2. Aquatic plants of Phragmites communis, Zizania latifolia, Typha angustata etc. range mainly to gentle gradient of slant 10 degree low and distribution pattern was ranging by Zizania latifolia, Typha angustata, Phragmites communis period of ten days from deepwater place. Nelumbo nucifera was forming become independent stock keeping away invasion of plant that ability to breed was different because was prosperous. Slant 10 bores was growing near sleep in been strange steep slope earth and distribution of emerged plant appeared punily and emerged plant and swampy land plant were ranged extensively in gentle gradient of 10 degree low. 3. On lake surrounding plant when wish to do distribution of natural conditions reference need to. That is, gentle gradient and distribution form of steep slope earth are different, and same pitch must consider enough this because appear as distribution, distribution according to that some plant species were growing was different.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.9-20
• /
• 2018

When a large-scale photovoltaic (PV) system is introduced into a distribution system, the customer's voltage may exceed the allowable limit ($220V{\pm}6%$) due to voltage variations and reverse power flow in the PV system. In order to solve this problem, we propose a method for adjusting the customer voltage using the existing step voltage regulator (SVR) installed in the primary feeder. However, due to the characteristics of a mechanically operating SVR, the customer voltage during the tap changing time of the SVR is likely to deviate from the allowable limit. In this paper, an energy storage system (ESS) with optimal operation strategies, and an appropriate capacity calculation algorithm are proposed, and the parallel driving scheme between the SVR and the ESS is also proposed to solve the customer voltage problem that may occur during the tap changing time of the SVR. The simulation results show that the allowable limit of the customer voltage is verified by the proposed methods during the tap changing time of the SVR when the large-scale PV system is connected to the distribution system.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.55-60
• /
• 2008

This paper presents how the load transfer mechanism of the ground anchor affects on the stability analysis of anchored slope. The finite element analysis and the conventional limit equilibrium analysis on the anchored slope were performed and compared. The limit equilibrium analysis of the anchored slope is widely used in design practice due to the easiness of the analysis. However, the load transfer mechanism is not considered properly for the analysis. When the failure surface passes through the bonded length of an anchor, the anchor load is disregarded and the factor of safety for the anchored slope is smaller than it should be. In this study, the load transfer distribution was incorporated into the limit equilibrium stability analysis of the anchored slope and the results were compared with those of finite element analysis.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2002

Let $T_{\phi}$ be a generalized Gauss transformation and $[a_1,\;a_2,\;{\cdots}]_{T_{\phi}}$ be a symbolic representation of $x{\in}[0,\;1)$ induced by $T_{\phi}$, i.e., generalized continued fraction expansion induced by $T_{\phi}$. It is shown that the distribution of relative frequency of [$k_1,\;{\cdots},\;k_n$] in $[a_1,\;a_2,\;{\cdots}]_{T_p}$ satisfies Central Limit Theorem where $k_i{\in}{\mathbb{N}}$ for $1{\leq}i{\leq}n$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.72-79
• /
• 2003

Spray characteristics were investigated by impinging F-O-O-F type injector with varying the impingement angle through 15, 20 and 30 degree and the mixture ratio(O/F ratio) from 1.5 to 3.0. Experimental results show that the correlation between dispersion and impingement angle is not influenced of the mixture ratio variation, but which has influence on number density, and there is a linear correlation between dispersion and impingement angle. Velocity distribution, standard deviation and SMD of droplets are decreased as the impingement angle increases. Also, it was confirmed that the distribution of droplet size are in accordance with Rosin-Rammler and Upper-limit distribution.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.820-829
• /
• 2004

The In-Containment Refueling Water Storage Tank (IRWST), one of the design improvements applied to the APR -1400, has a function to condense the high enthalpy fluid discharged from the Reactor Coolant System (RCS). The condensation of discharged fluid by the tank water drives the tank temperature high and causes oscillatory condensation. Also if the tank cooling water temperature approaches the saturated state, the steam bubble may escape from the water uncondensed. These oscillatory condensation and bubble escape would burden the undue load to the tank structure, pressurize the tank, and degrade its intended function. For these reasons simple analytical modeling and experimental works were performed in order to predict exact tank temperature distribution and to find the effective cooling method to keep the tank temperature below the bubble escape limit (93.3$^{\circ}C$), which was experimentally proven by other researchers. Both the analytical model and experimental results show that the temperature distributions are horizontally stratified. Particularly, the hot liquid produced by the condensation around the sparger holes goes up straight like a thermal plume. Also, the momentum of the discharged fluid is not so strong to interrupt this horizontal thermal stratification significantly. Therefore the layout and shape of sparger is not so important as long as the location of the sparger hole is sufficiently close to the bottom of the tank. Finally, for the effective tank cooling it is recommended that the locations of the discharge and intake lines of the cooling system be cautiously selected considering the temperature distribution, the water level change, and the cooling effectiveness.

• The Journal of Korean Physical Therapy
• /
• v.24 no.4
• /
• pp.241-246
• /
• 2012

Purpose: We investigated the effect of postural stability and balance with foot orthotics in hemiplegic patients. Methods: The subjects enrolled in this study were 16 hemiplegic patients who were examined for balance ability, weight distribution, and limits of stability with or without foot orthotics insole. Balance was measured according to a stance position by BIORESCUE: static balance open eyes (SEO), static balance close eyes (SEC), dynamic balance open eyes (DEO), dynamic balance close eyes (DEC), right and left weight distribution (RLWD), anterior and posterior weight distribution (APWD) and limit of stability (LOS). The data were analyzed with SPSS window version 18.0 (IBM Co., Armonk, NY, USA). Results: The results were of significant changes to the SEO (p<0.05), RLWD (p<0.05), APWD (p<0.05), and LOS (p<0.05). The SEC, DEO and DEC were not found to be statistically significant. Conclusion: It was found that foot orthotics affected the balance for hemiplegic patients. Therefore, it is thought to help fall prevention to measure the balance ability.

• Steel and Composite Structures
• /
• v.3 no.3
• /
• pp.185-198
• /
• 2003

The concept of performance based seismic design has been gradually accepted by the earthquake engineering profession recently, in which the cost-effectiveness criterion is one of the most important principles and more attention is paid to the structural performance at the inelastic stage. Since there are many uncertainties in seismic design, reliability analysis is a major task in performance based seismic design. However, structural reliability analysis may be very costly and time consuming because the limit state function is usually a highly nonlinear implicit function with respect to the basic design variables, especially for the complex large-scale structures for dynamic and nonlinear analysis. Understanding statistical properties of the structural inelastic deformation, which is the aim of the present paper, is helpful to develop an efficient approximate approach of reliability analysis. The present paper studies the statistical properties of the maximum elastoplastic story drift of steel frames subjected to earthquake load. The randomness of earthquake load, dead load, live load, steel elastic modulus, yield strength and structural member dimensions are considered. Possible probability distributions for the maximum story are evaluated using K-S test. The results show that the choice of the probability distribution for the maximum elastoplastic story drift of steel frames is related to the mean value of the maximum elastoplastic story drift. When the mean drift is small (less than 0.3%), an extreme value type I distribution is the best choice. However, for large drifts (more than 0.35%), an extreme value type II distribution is best.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.412-414
• /
• 2003

Since the discovery of the high-temperature superconductors, many researches have been performed for the practical applications of superconductivity technologies in various fields. As results, significant progress has been achieved. Especially, Superconducting Fault Current Limiter (SFCL) offers an attractive means to limit fault current in power systems. In order to verify the effectiveness of the SFCL, in this paper, the analysis of fault current and voltage stability assessment in a distribution system are studied using the EMTDC based simulation method in which a novel component for a resistive type of SFCL is presented. Through the simulation, the most suitable SFCL's application point is selected and the assessment method for the parameters of the SFCL is also recommended.