• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.77-80
• /
• 2005

Lightweight concrete is known for its advantage of reducing the self-weight of the structures, reducing the areas of sectional members as well as making the construction convenient. Thus the construction cost can be saved when applied to structures such as long-span bridge and high rise buildings. However, the lightweight concrete requires specific mix design method that is quite different from the typical concrete, since using the typical mix method would give rise the material segregation as well as lower the strength by the reduced weight of the aggregate. In order to avoid such problems, it is recommended to apply the mix design method of self-compacting concrete for the lightweight concrete. Experimental tests were performed as such compressive strength, dry shrinkage and carbonation of high strength lightweight self-compacting concrete.

• 디지털융복합연구
• /
• 제11권5호
• /
• pp.307-312
• /
• 2013

본 논문은 경량 컨테이너 구조 환경에서 EJB 3.1 기반의 영화 예매 시스템의 설계 및 구현을 하는데 목적이 있다. N-tier 엔터프라이즈 아키텍처가 가지고 있는 문제점을 해결하고 장점들을 지원하기 위하여 새롭게 등장한 아키텍처가 경량 컨테이너 아키텍처이다. 이 구조는 EJB 아키텍처와 같이 무겁지 않으면서도 EJB 컨테이너의 모든 가능을 제공하는 구조이다. 현재까지 경량 컨테이너 아키텍처로 표준 엔터프라이즈 기반의 EJB 3.1이 있다. 따라서 본 연구에서는 N-tier 엔터프라이즈 아키텍처가 가지고 있는 단점들을 해결하고 장점들을 지원하기 위하여 개발된 최신 경량 컨테이너 아키텍처인 새로운 표준 환경인 EJB 3.1을 기반으로 영화 예매 시스템의 분석 및 설계한 후 구현하고자 한다.

• 콘크리트학회지
• /
• 제9권1호
• /
• pp.165-172
• /
• 1997

경량기포콘크리트란 시멘트슬러리 속에 미리 생성된 기포를 혼합시켜 양생시킴으로써 동일한 체적의 보통콘크리트보다 가볍게 만든 콘크리트를 의미한다. 본 연구의 목적은 고분자기포제를 이용하여 초경량성과 타설에 충분한 유동성을 확보하면서 소요강도를 갖는 최적의 선기포방식의 경량기포콘크리트를 개발하는데 있다. 연구결과 실리카흄, 플라이애쉬 등의 혼화재와 산업부산물인 발포포리스티렌비드의 혼합으로 경량기포콘크리트의 역학적 특성을 개선시켜 기존의 선기포방식으로 제조된 경량기포콘크리트보다 유동성 , 경량성과 강도특성이 우수한 경량기포콘크리트를 개발하였다. 본 논문에서는 개발된 경량기포콘크리트의 여러 가지 배합인자에 따른 유동성 및 압축강도를 규명하였으며 최적 배합비를 도출하였다.

• 한국시뮬레이션학회논문지
• /
• 제29권2호
• /
• pp.95-103
• /
• 2020

본 논문에서는 경량구조 적용을 위한 구조 접합부 설계를 제시하였다. 압력에 대한 구조 안정성 연구를 위하여 용접부 접합부와 볼트 접합부에 대한 모델을 설계하였다. 확립된 모델의 신뢰성 검증을 위하여, 비선형 해석을 수행하였고, 실험결과와 비교하였을 때 유사한 결과를 확인하였다. 또한 비교연구를 통하여 구조설계 재료와 적합한 용접방법을 선택하였으며, 볼트의 개수와 위치에 따른 파단하중 시뮬레이션을 진행하여 응력에 따른 안정성을 분석하였다. 마지막으로, 접합부 모델을 기반으로 경량 구조를 모델링하고 구조 해석을 수행하였다. 그 결과, 용접부와 볼트체결을 적용하여 설계된 구조가 접합부를 적용하지 않은 구조에 비해 최대응력이 31.4% 감소함을 확인하였다. 이 결과를 토대로, 경량구조의 안정성 해석 시 접합부 모델링의 필요성을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.803-804
• /
• 2013

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.125-131
• /
• 2011

Five all-lightweight alkali-activated (AA) slag concrete mixes were tested according to the variation of water content to examine the significance and limitation on the development of cementless structural concrete using lightweight aggregates. The compressive strength development rate and shrinkage strain measured from the concrete specimens were compared with empirical models proposed by ACI 209 and EC 2 for portland cement normal weight concrete. Splitting tensile strength, and moduli of elasticity and rupture were recorded and compared with design equations specified in ACI 318-08 or EC 2, and a database compiled from the present study for ordinary portland cement (OPC) lightweight concrete, wherever possible. Test results showed that the slump loss of lightweight AA slag concrete decreased with the increase of water content. In addition, the compressive strength development and different mechanical properties of lightweight AA slag concrete were comparable with those of OPC lightweight concrete and conservative comparing with predictions obtained from code provisions. Therefore, it can be proposed that the lightweight AA slag concrete is practically applicable as an environmental-friendly structural concrete.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.14-20
• /
• 2020

Currently, the automotive market is intensively researching eco-friendly vehicles such as EV vehicles and hydrogen vehicles. Further, research and developments for the future markets such as autonomous vehicles and the connective cars are coped up continuously along with the rising fuel economy regulations and the emission regulations. In this development, various sensors, batteries, and control devices are fused in order to decrease the weight of the vehicle. Moreover, since the fuel economy regulation is an issue, research on the weight reduction of body parts is underway. Therefore, in this work, a study is conducted to obtain the optimal design of the Dash part that separates the engine room and the passenger seat of the vehicle body by combining lightweight materials with high rigidity materials. The optimal design was obtained using the Finite Element Analysis. Further, AL5083 was used as the lightweight material and ASBC1470 was used for high strength materials. The parts made with this combination of materials had strength equivalent to that of the existing steel and the weight was reduced by 10%.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.50-53
• /
• 2009

This paper proposes an object-oriented software development guidance and an evaluation index for the productivity related to spring framework 2.5. Non EJB and the EJB architecture to resolve the problem with benefits to support the new architecture is a lightweight container architecture. This architecture, such as the EJB, but not heavy, to provide all of the architecture is possible. The lightweight container architecture is most often used in business spring framework is well-known architecture. Therefore, this research has the Non EJB and the EJB to solve the advantages and disadvantages developed to support the latest spring framework 2.5 lightweight container architecture based on the design and implementation of a pilot system with the objective through the specification of the software previously to provide guidance to development productivity.

• Structural Engineering and Mechanics
• /
• 제12권4호
• /
• pp.363-376
• /
• 2001

Sandwich plates are widely used in lightweight design due to their high strength and stiffness to weight ratio. Due to the heterogeneous structure of sandwich plates, they can exhibit local instabilities (wrinkling), which lead to a sudden loss of stiffness in the structure. This paper presents an analytical solution to the wrinkling problem of sandwich plates. The solution is based on the Rayleigh-Ritz method, by assuming an appropriate deformation field. In contrast to the other approaches up to now, this model takes arbitrary and different orthotropic face layers, finite core thickness and orthotropic core material into account. This approach is the first to cover the wrinkling of unsymmetric sandwiches and sandwiches composed of orthotropic FRP face layers, which are most common in advanced lightweight design. Despite the generality of the solution, the computational effort is kept within bounds. The results have been verified using other analytical solutions and unit cell 3D FE calculations.

• Journal of Electrochemical Science and Technology
• /
• 제14권2호
• /
• pp.120-130
• /
• 2023

PEMFC has high potential for future development due to its high energy density, eco-friendliness, and high energy efficiency. When it becomes small, light and flexible, it can be competitive as an energy source for portable devices or flexible electronic devices. However, the use of hard and heavy materials for structural rigidity and uniform contact pressure transmission has become an obstacle to reducing the weight and flexibility of PEMFCs. This review intends to provide an example of the application of a new structure and material for lightweight and flexibility. As a lightweight PEMFC, a tubular design is presented and structural advantages through numerical modeling are explained. Manufacturing methods to realize the structural advantages and possibilities of tubular PEMFCs are discussed. In addition, the materials and manufacturing processes used to fabricate lightweight and flexible PEMFCs are described and factors affecting performance are analyzed. Strategies and structural improvements of light and flexible movements are discussed according to the component parts.