• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.10-22
• /
• 2009

This paper presents an LED lighting system with an LED color control algorithm that can independently change its color temperature and illuminance. To show the validity of the proposed algorithm, it is proven that its solution always exists. The proposed algorithm was applied to the control of an LED module that is composed of red, green, blue, and white (RGBW) LEDs. Its color temperature variation ranged from 3,500~7,500[$^{\circ}K$], and its illuminance ranges from 500~1,500[lux]. Within these range, the color temperature and illuminance deviations are as low as $\pm0.8$[%] when the junction temperature of LEDs are maintained at 40[$^{\circ}C$]. In the range of 30~70[$^{\circ}C$], the measured illuminance and color temperature deviations are as low as 2.1[%] and 3.6[%], and the compensated ones are as low as 1[%] and 0.49[%], when the desired illuminance and color temperature are 1,000[lux] and 6,500[$^{\circ}K$], respectively.nyang.ac.kr).

• Korean Journal of Organic Agriculture
• /
• v.26 no.3
• /
• pp.515-532
• /
• 2018

Light is an essential and powerful element to animals. A light-emitting diode (LED) is most efficient in terms of economic benefits. The aim of the present study was to evaluate the effects of LED lighting time on milk production, milk composition, and the immune response of Holstein cows. Forty lactating cows were assigned to four experimental groups: control; natural daylight, treatment; am3-6, pm6-12 and pm6-am6. We found that there was no significant effect on the decrease ratio in milk production among the groups. Milk urea nitrogen (MUN) was significantly decreased in pm6-am6 and pm6-12 than the control. With regard to the hemolytic biochemical analysis, GLU was significantly increased and CRE, T-BIL were significantly decreased in the pm6-12 than the control. IGF-1 levels were significantly increased in pm6-12 compared to other groups. Besides, cortisol was significantly lowered in the pm6-12 than the control, while prolactin, IgA and IgG were not significant among the groups. In addition, catalase and glutathione peroxidase were also significantly increased in pm6-12 than the control. However, antioxidant enzyme activity and superoxide dismutase were not significant among the experimental groups. Therefore, it was concluded that LED lighting time had some impact on blood parameters and immune responses in dairy cows without any changes in milk production.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.367-372
• /
• 2017

LED illumination has been developed from simple illumination to human oriented multi-functional system depending on the IT convergence trends. Thus, the convergence of IT technology such as various types of sensor and communication functions with application software can make saving of energy, and there are also several needs about the tailor-made illuminations requirements for the diverse users who want to take their own colors, strengths of the light. For the adaption of these kinds of intelligent system illumination, user oriented sensor and control should be possible. The LED lighting control system transmits and receives data via the Bluetooth mesh network and provides functions such as LED lighting control, LED lighting condition monitoring, energy usage monitoring, and energy peak point management. Therefore, in this paper, we suggest wireless communication platform and control system for the LED illumination control. We can expect life extension of LED illumination, and energy saving through this suggested system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.664-667
• /
• 2004

In nuclear power plant, the main control room(MCR) plays a leading and important role, so it is the core to have its design well operater-centered, both physically and cognitively. This paper especially analyzes focusing on lighting MCR environment and shows alternatives. It will lead to improve work efficiency and to care operator's sight. In conclusion, reducing operator's stress, fatigue and increasing safety, comfort.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.696-704
• /
• 2013

In this paper, we introduce the LED emotional lighting system realized with the aid of both intelligent algorithm and RGB LED combined with White LED. Generally, the illumination is known as a design factor to form the living place that affects human's emotion and action in the light- space as well as the purpose to light up the specific space. The LED emotional lighting system that can express emotional atmosphere as well as control the quantity of light is designed by using both RGB LED to form the emotional mood and W LED to get sufficient amount of light. RBFNNs is used as the intelligent algorithm and the network model designed with the aid of LED control parameters (viz. color coordinates (x and y) related to color temperature, and lux as inputs, RGBW current as output) plays an important role to build up the LED emotional lighting system for obtaining appropriate color space. Unlike conventional RBFNNs, Fuzzy C-Means(FCM) clustering method is used to obtain the fitness values of the receptive function, and the connection weights of the consequence part of networks are expressed by polynomial functions. Also, the parameters of RBFNN model are optimized by using PSO(Particle Swarm Optimization). The proposed LED emotional lighting can save the energy by using the LED light source and improve the ability to work as well as to learn by making an adequate mood under diverse surrounding conditions.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.488-499
• /
• 2016

We present a design and optical simulation of a cost-effective hybrid daylighting/LED system composed of mixing sunlight and light-emitting diode (LED) illumination powered by renewable solar energy for indoor lighting. In this approach, the sunlight collected by the concentrator is split into visible and non-visible rays by a beam splitter. The proposed sunlight collector consists of a Fresnel lens array. The non-visible rays are absorbed by the solar photovoltaic devices to provide electrical power for the LEDs. The visible rays passing through the beam splitters are coupled to a stepped thickness waveguide (STW) by tilted mirrors and confined by total internal reflection (TIR). LEDs are integrated at the end of the STW to improve the lighting quality. LEDs’ light and sunlight are mixed in the waveguide and they are coupled into an optical fiber bundle for indoor illumination. An optical sensor and lighting control system are used to control the LED light flow to ensure that the total output flux for indoor lighting is a fixed value when the sunlight is inadequate. The daylighting capacity was modeled and simulated with a commercial ray tracing software (Lighttools^TM). Results show that the system can achieve 63.8% optical efficiency at geometrical concentration ratio of 630. A required accuracy of sun tracking system achieved more than ±0.5^o . Therefore, our results provide an important breakthrough for the commercialization of large scale optical fiber daylighting systems that are faced with challenges related to high costs.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.57-62
• /
• 2016

This study was conducted to find out the influence of red LED (Light Emitting Diode) lighting on the photosynthesis, vegetative growth and fruit quality of 'Fuji'/M.26 adult apple tree during night after sunset. The photosynthetic rate, stomatal conductance and transpiration rate at daytime of red LED treatments was not different to those of the control. However, the stomatal conductance and transpiration rate at the nighttime of red LED treatments were lower than those of the control, and the red LED lighting during night after sunset was not induce to photosynthesize at nighttime. In the leaf characteristics, the red LED lighting seemed to increase leaf area and C/N ratio, but decrease SPAD value. The bourse shoot length of the red LED treatments was shorter than that of the control. In the fruit quality, the red LED lighting seemed to increase ethylene production, respiration rate, soluble solid content and fruit red color, and especially the fruit red color tend to increase as the red LED lighting time was longer. In conclusion, the red LED lighting during night after sunset of 'Fuji'/M.26 apple tree promoted the fruit maturation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.105-106
• /
• 2006

In this paper we describe a driving, control and monitor of ship's emergency lighting system using power line modem.(PLM). Through this paper, experiment confirms that ON-OFF control of multiple SELP, real time transmission and monitor of parameters as to voltage, current, and power values are performed appropriately by PLM communication.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.455-455
• /
• 2000

A novel pulse-width-modulated (PWM) function is introduced for precise position measurement in an enclosed signal field. An amplitude modulation was used to light the LEDs for the conventional study. However, the transform properties from the driving signal to the lighting intensities of the LEDs are non-linear, and accurate control of the lighting power was necessary. Therefore, a lighting function independent of these properties is desired. Well-known PWM functions are used to construct the enclosed signal field by simulation, and the precision of the phase detecting system is analyzed. A novel "axial symmetry PWM" function is found to be effective for orthogonal pahse detection.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.667-671
• /
• 2004

This paper describes an development of digital power supply for ship's emergency lighting system(SELS). Proposed system is composed of emergency power supply system(EPSS), half bridge(HB) inverter, fluorescent lamp(FL) starting circuit and microprocessor control system. Experimental works using proposed system confirm that speedy and stable power to be supplied when main power source cut-off, compared with conventional analog type, and control input power up to 35.0［%］ by adjusting pulse frequency of the HB inverter.