• 한국표면공학회지
• /
• 제32권3호
• /
• pp.428-432
• /
• 1999

As metallic surface has its unique lustrous appearance and optical reflectance in visible range of light, the metallization of plastic surface has been an essential drive toward weight reduction for fuel economy and decorations in transportation industry and has been put into practiced from wet chemical-electrochemial to dry vacuum process in view of an environmental effect. Electron-beam metallization was used in this work with an aim at improving the scratchproof surface hardness of plastic substrate with metallic finish character. Thin film of Al ($1000\AA$) and $SiO_2$($7000\AA$) were metallized on substrate of PC and PMMA and the films were evaluated by pencil test for surface hardness and by cross-cut tape test for adhesion. The ion beam treatment improved around twice as hard as non-treat surface. The ion beam is effect on its hardness and adhesion to surface hardened PC substrate.

• 수산해양교육연구
• /
• 제19권3호
• /
• pp.478-490
• /
• 2007

A technology of ultrasonic biotelemetry for tracking fish behavior is investigated. The ultrasonic biotelemetry system is constituted by a transmitter and a receiving system. Because a pinger was mainly used for the transmitter, the capability for pinger to possess was investigated and the efficient usage for pinger was examined. A source pressure level and a frequency were synthetically examined so that pinger could realize small size, a light weight, and a long life time. The receiving system is divided roughly into directional hydrophone systems and acoustic positioning systems by the receiving method. The directional hydrophone system is divided into single beam and multiple beam with the number of hydrophone, and the acoustic positioning systems is divided into LBL (Long Base Line), SBL (Short Base Line), and SSBL (Super Short Base Line) on the basis of base line. The present situation, the merits and demerits, and the principle of each receiving method were investigated in detail, and the efficient usage for each receiving method were examined.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.406-411
• /
• 2003

This paper deals with the effect of laser material processing on the EMU production technique. Material processing with lasers takes advantage of all the characteristics of laser light. The high energy density and directionality achieved with lasers permits strong localized heat- or photo-treatment of materials with spatial resolution below one micrometer. The pulsed and mono-chromatic light allows the control of depth of heat treatment or selective excitation. The laser beam can be moved to process large areas, is a sterile tool and is no subject to wear and tear. Using laser processing have taken more interests in EMU production for improving the rigidity, weight reduction, crash durability, and cost savings so that their application to auto-bodies has been increased.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.92-99
• /
• 2006

Design capability for high safety vehicle with light weight is crucial to enhancing competitive power in vehicle market. The structural foam can contribute to restraining section distortion in body members undergoing bending collapse at vehicle crash. In this study, first, the validation of analysis model including structural foam model for simulating fracture behavior was discussed, and the bending collapse characteristics of five representative section types were analyzed and compared. Next, with changing the laminate foam shape, load carrying capability and absorbed energy were observed. The results suggests a design strategy of body members filled with laminate foam, leading to effectively elevating bending collapse characteristics with weight increase in the minimum.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.370-376
• /
• 2005

Magnesium alloys are becoming important material for light weight car body, due to their low specific density but high specific strength. However they have a poor weldability, caused high oxidization tendency and low vapor temperature. In this study, the welding performance of magnesium alloys was investigated for automobile application. The materials were rolled magnesium alloy sheet contains Al and Zn such as AZ3l , AZ6l and AZ9l. Three types of welding process were studied, that were GTAW, Laser beam welding and FSW. To evaluate the weldability, we examined the appearance of welding bead. Also we checked bead shape and internal defects such as crack and porosity on cross section of welding bead. The mechanical property was measured for welded specimen by tensile test. For determination of the strength change by welding process, the hardness profile across the welding center was measured. For the results, the tensile properties of welded specimen were decreased obviously on all welding process. For the fusion welding process such as GTAW and laser beam welding, the surface of the welding bead was covered with oxidized magnesium dust but it was removed by simple cleaning work as wipe-out with tissue. Also under cut, that caused vaporization of base metal was occurred. for the friction stir welding, there was no oxidation, under-cut or internal defects. However it had poor weld performance, the reason was cleavage fracture occurred at plastic deformation zone. For welding of magnesium alloy, the laser beam welding process was recommended.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1992-1993
• /
• 2007

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• 항공우주시스템공학회지
• /
• 제9권4호
• /
• pp.55-61
• /
• 2015

In this study, we peformed optimal design of a composite skid landing gear, one of the solid spring shock absorbers, for light vertical takeoff and landing aircraft. Although a solid spring type has poor energy dissipation capability, it is commonly used for light aircraft where sink speeds are low and shock absorption is non-critical in terms of simplicity, low cost and weight reduction. In this paper, design parameters of solid spring such as sink speed, gear leg length, deflection and landing load factor were reviewed. In order to meet structural requirements such as deflection and strength, finally, we conducted optimal design of the composite skid landing gear for VTOL UAV using genetic algorithm and pattern search algorithm.

• 해양환경안전학회지
• /
• 제26권4호
• /
• pp.403-411
• /
• 2020

본 논문에서는 도서 지역 화물 및 승객 운송을 맡은 연안 항해용 친환경 차도선을 개발하면서, 검토된 주요 결과들에 대해서 논의한다. 시장에서의 경제성을 확보하기 위하여, 폭 19 m를 최종 개발모델 및 갑판면적에 많은 차량이 배치되도록 고려하였다. 조파저항 감소를 위해 선형 형상은 "V"에 선수벌수를 접목하였으며, 수치해석을 통해 개발 선박의 유체역학적 성능을 확인하였다. 선가를 직접 결정짓는 선각 중량을 감소하기 위하여, 최적화 전문 프로그램에 내재된 다목적 최적화 방법인 파레토 시뮬레이트 어닐링을 활용하여 약 3.9 %의 중량 절감을 달성하였다. 본 연구를 통해서 도출된 주요 결과들은 추후 쌍동형 차도선 관련 연구를 수행하는 엔지니어와 관련 산업에 좋은 선례가 될 것으로 기대한다.

• 항공우주기술
• /
• 제12권1호
• /
• pp.1-9
• /
• 2013

태양전지 및 전기동력을 이용한 장기 체공 무인기의 체공 효율을 증가시키기 위해서는 구조 경량화가 필수적이다. 본 논문에서는 24시간 장기체공 전기동력 무인항공기인 EAV-2H의 주익 경량화 및 구조 건전성 확보를 위하여 Mylar Film과 섬유강화 복합재료로 구성된 주익을 설계하였다. 보이론 해석을 이용하여 주익 Spar의 형상 선정 및 구조 사이징을 수행하였다. EAV-2H 임무를 고려하여 하중해석을 수행하고 주익의 주요 구성품에 대해 유한요소해석을 수행하였다. 마지막으로 주익의 정적구조시험을 통해 주익의 구조 건전성을 확인하였다. 본 연구를 통하여 개발된 EAV-2H 주익은 이전 모델인 EAV-2에 비교하여 Span 기준 42%의 중량이 감소되었으며, 설계극한하중을 부가하는 정적구조시험을 통과하였다.

• 한국융합학회논문지
• /
• 제10권1호
• /
• pp.155-161
• /
• 2019

복합소재는 기존의 일반적인 소재보다 내구성과 기계적 성질들이 뛰어난 경량 소재이다. 본 연구에서는 경량 복합소재에 주목하여, 접착제를 이용하여 접착한 CFRP 접착구조물의 정적 파괴 특성을 조사하고자 했고 적층 각도를 변수로 한 CFRP 이중외팔보 시험편을 설계하여 정적 파괴 해석을 수행하였다. 본 연구를 위하여 설계된 CFRP 이중외팔보 시험편들의 적층각도들은 각각 $30^{\circ}$와 $45^{\circ}$, $60^{\circ}$이며, 연구 결과로서는 적층 각도 $45^{\circ}$인 시험편이 가장 $30^{\circ}$, $60^{\circ}$의 적층 각도를 가진 시험편들보다 더 좋은 내구성을 보였으며, $30^{\circ}$의 적층 각도를 가진 시험편이 모든 시험편 중에서 내구성이 가장 취약한 것을 확인할 수 있었다. 이와 같은 본 연구 결과를 통하여 적층 각도 별 CFRP 접착구조물의 파손데이터를 확보할 수 있었으며, 본 연구결과를 토대로 얻은 접착 계면의 파손데이터를 활용함으로서 실생활에서의 기계나 구조물에 융합하여 그 미적 감각을 나타낼 수 있다.