• Architectural research
• /
• 제20권2호
• /
• pp.53-64
• /
• 2018

A nonlinear analytical model has been proposed for two-span two-story reinforced concrete frames with relaxed section details. The analytical model is composed of beam, column, and beam-column joint elements. The goal of this study is to develop a simple and light nonlinear model for two-dimensional reinforced concrete frames since research in earthquake engineering is usually involved in a large number of nonlinear dynamic analyses. Therefore, all the nonlinear behaviors are modeled to be concentrated on flexural plastic hinges at the end of beams and columns, and the center of beam-column joints. The envelope curve and hysteretic rule of the nonlinear model for each element are determined based on experimental results, not theoretical approach. The simple and light proposed model can simulate the experimental results well enough for nonlinear analyses in earthquake engineering. Consequently, the proposed model will make it easy to developing a nonlinear model of the entire frame and help to save time to operate nonlinear analyses.

• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.1-7
• /
• 2008

본 논문에서는 무선랜을 활용하여서 이동성과 유니버스가 크게 증가하고 다양한 조명연출이 가능한 새로운 WDMX 제어기를 제안, 설계, 및 구현한다. 먼저 DMX 프로토콜이 8비트 마이크로콘트롤러를 사용하여 구현한다. 그리고 DMX 프로토콜과 802.11b 무선랜 기반 프로토콜 스택간의 프로토콜 변환 방법을 제안하고 구현한다. 끝으로 개발된 WDMX 제어기를 검증하기 위하여 상업용 DMX 장비와 연계시험을 실시하며, 최대 9,999 슬레이브를 초당 30번 refresh 할 수 있는 다양한 조명효과의 가능성을 보여준다.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.440-456
• /
• 2009

Because PBD was started as a design tool for steel construction and concrete construction, it was able to applied to the post and beam method of wooden building constructions. But, it may not suitable to light frame wooden construction that is becoming popular in domestic construction market due to the economical efficiency and the constructive simplification. Owing to the share effects between member and sheathing material or among structural members, light frame wooden construction is different from post and beam construction that use a single structural member. Therefore, consideration on the system analysis and system design are urgently needed to use in actual life and inspect the reliability of structures from the system view. With this in mind, code conversion from ASD to PBD that is pressing issue in domestic wooden building construction was studied, also various countries status about PBD were considered and then approaching methods on the system reliability were referred. Finally, several considerations for the development of PBD were explored. PBD should be considered as, not only a new structural design process that select sizes of structural member, but a industrial tool that can lead a development of more reliable wood products. A strongest point of PBD is independent of various construction materials and construction types.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.311-323
• /
• 2019

The number of newly constructed traditional Korean houses, i.e., Hanoks, and light-frame buildings is increasing. However, related research is limited owing to the lack of awareness regarding safety evaluations. Therefore, this study conducted an outdoor exposure test to accurately evaluate wooden constructions. Spruce, pine, and fir (SPF) material was monitored for a year, wherein the SPF material was artificially dried under 18% moisture content, and its physical properties and color differences were measured once a month. Large differences were observed in the material's weight and moisture content, which are indexes sensitive to daily range and rainfall; however, no significant difference was found for other basic properties in the pre and post test results. Herein, $L^*$, $a^*$, and $b^*$ values represent color differences; these values exhibited a general decrease after the test. Such differences were attributed to the loss of lignin in the wood. The color difference value was high between the months of May and July, when the daily range and rainfall significantly fluctuated. Multiple regression analysis was performed on the $a^*$ value (redness indicator), daily range, rainfall, and ultraviolet index. The results indicated that the daily range influenced redness the most. According to the estimated regression equation, the daily range and redness are positively correlated. Based on the results, the types and influence of independent variables on color difference are expected to change as the wood's duration of outdoor exposure and the amount of data obtained both increase.

• 한국언론정보학보
• /
• 제35권
• /
• pp.181-210
• /
• 2006

본 연구는 식품 안전을 둘러싼 위험 상황을 보도하는 언론의 보도 프레임을 추출, 언론이 위험 상황을 위기의 사회 현실로 구축해가는 양상을 분석하는 것을 목적으로 한다. 이를 위해 1989년 삼양라면 우지파동에서 2005년 김치 기생충 알 검출 사건에 이르는 11개 식품안전 사고를 보도한 언론보도 내용을 대상으로 미디어 프레임을 분석, 각 프레임을 이루는 장치를 통해 언론이 위기를 구축해가는 양상을 추적했다. 분석에 사용된 프레임은 책임소재, 갈등, 인간적측면의 부각, 경제적 결과, 도덕성 등 다섯 가지 프레임이었으며, 연구 결과 이들 프레임에는 위기 확산, 책임 소재, 갈등 부각 등의 현저성이 두드러졌다. 특히 각 프레임을 구성하는 행위자는 가해자와 피해자라는 이분법적 대비 구조를 나타냈다. 기사에 등장하는 행위의 주체인 식품업자, 정부 및 해당관청, 소비자, 전문가 등은 이러한 갈등, 혹은 대비 구조의 프레임 안에서 때론 가해자로, 때로는 피해자로 틀짓기 되며 위험의 상황을 확산, 증폭 시키면서 소비자들의 혼란을 야기하고 위기의 사회현실을 구축하는 것으로 나타났다.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.243-248
• /
• 2014

외부 광원여부에 상관없이 3D정보를 수신할 수 있는 Microsoft의 3D 모션 센서인 키넥트의 Depth frame을 사용하여 물체의 움직임 영역을 감지할 수 있는 방법을 연구하였다. 센서로부터 수신되는 Depth 정보 중 주로 물체의 경계면에 존재하는 노이즈를 제거하기 위해 픽셀의 x, y좌표에 대한 블러링 기법과 z좌표에 대한 주파수 필터를 적용하였다. 또한 인접 픽셀들의 변화량에 따른 군집화 필터를 적용함으로서 움직이는 물체 영역을 추출할 수 있었고 필터 설정에 따라 기준이상의 빠른 움직임을 감지할 수 있도록 하여 이동형 로봇에 응용할 수 있도록 하였다. 특히 IR 카메라에 의하여 만들어지는 Depth frame을 이용함으로써 주야간 모두 제약 없이 사용할 수 있다. 또한 직진 방향으로 움직이는 물체에 대해서도 입체적으로 감지할 수 있어 무인 로봇영역에 응용할 수 있다.

• 대한전자공학회논문지SP
• /
• 제49권2호
• /
• pp.76-82
• /
• 2012

가정용 캠코더의 보급으로 인해서 손떨림이나 카메라 흔들림을 보상하기 위해 다양한 동영상 안정화 기법들이 연구되고 있다. 동영상 안정화 기법은 초기에 2차원 움직임만을 고려하였지만, 최근에는 3차원 움직임까지 고려하여서 더 좋은 성능을 얻을 수 있게 되었다. 이러한 기법들 중 가장 좋은 성능을 보이는 것으로 알려진 기법이 바로 content preserving warping을 이용한 기법인데 이것은 뛰어난 성능을 보이지만 방대한 연산량이 단점이다. 그래서, 우리는 ROI 측면에서 종래 기술 대비 동등한 화질을 보이면서도 연산량이 적은 full frame warping을 제안한다. 먼저, 목표로 하는 깊이 정보를 바탕으로 관심 영역을 설정하고, 설정된 관심 영역을 기반으로 full frame warping을 수행한다.

• 한국정밀공학회지
• /
• 제25권10호
• /
• pp.77-83
• /
• 2008

In terms of saving costs, energy and materials, the weight of cars has been gradually reduced by optimizing design of structure, which also gives us good performance. In compliance with this, it should satisfy the lifetime of cars for 25 years under the operation. The purpose of this study is to evaluate the strength of fatigue using date from strain gauges attached carbody and bogie frame. This dynamic stress can be evaluated using S-N curve based on stress amplitude. Modified S-N curve by CORTON-DOLAN is used for more conservative and substantial evaluation. In addition, !he loadings itself of carbody and bogie frame are considered by calculating the rate of the differences which are occurred between empty car and fuiiy occupied car with passengers. Rainflow cycle counting method is applied to arrange the stress data for the modified S-N curve to predict lifetime of the materials. Conclusively the cumulative damages are not only calculated by Miner's Rule, but the safety factors are also determined by Goodman diagram.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.151-156
• /
• 2014

PURPOSE. To investigate the microtensile bond strength between two all-ceramic systems; lithium disilicate glass ceramic and zirconia core ceramics bonded with their corresponding glass veneers. MATERIALS AND METHODS. Blocks of core ceramics (IPS e.max$^{(R)}$ Press and Lava$^{TM}$ Frame) were fabricated and veneered with their corresponding glass veneers. The bilayered blocks were cut into microbars; 8 mm in length and $1mm^2$ in cross-sectional area (n = 30/group). Additionally, monolithic microbars of these two veneers (IPS e.max$^{(R)}$ Ceram and LavaTM Ceram; n = 30/group) were also prepared. The obtained microbars were tested in tension until fracture, and the fracture surfaces of the microbars were examined with fluorescent black light and scanning electron microscope (SEM) to identify the mode of failure. One-way ANOVA and the Dunnett's T3 test were performed to determine significant differences of the mean microtensile bond strength at a significance level of 0.05. RESULTS. The mean microtensile bond strength of IPS e.max$^{(R)}$ Press/IPS e.max$^{(R)}$ Ceram ($43.40{\pm}5.51$ MPa) was significantly greater than that of Lava$^{TM}$ Frame/Lava$^{TM}$ Ceram ($31.71{\pm}7.03$ MPa)(P<.001). Fluorescent black light and SEM analysis showed that most of the tested microbars failed cohesively in the veneer layer. Furthermore, the bond strength of Lava$^{TM}$ Frame/Lava$^{TM}$ Ceram was comparable to the tensile strength of monolithic glass veneer of Lava$^{TM}$ Ceram, while the bond strength of bilayered IPS e.max$^{(R)}$ Press/IPS e.max$^{(R)}$ Ceram was significantly greater than tensile strength of monolithic IPS e.max$^{(R)}$ Ceram. CONCLUSION. Because fracture site occurred mostly in the glass veneer and most failures were away from the interfacial zone, microtensile bond test may not be a suitable test for bonding integrity. Fracture mechanics approach such as fracture toughness of the interface may be more appropriate to represent the bonding quality between two materials.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.603-616
• /
• 2009

The past two decades were mainly devoted to model validation and computer code verification against global corium experiments, code application to reactor situations, and investigation of the role of melt properties in steam explosion energetics. Corium data were essentially provided by JRC-Ispra in the FARO and KROTOS facilities and by KAERI in the TROI facility. Verification of code applicability to reactor situations was performed essentially in the frame of the international OECD/SERENA programme. The paper makes a synthesis of the findings made during the above-mentioned period and expresses a personal view of the author with respect to the progress made and expected for the resolution of the steam explosion issue for light water reactors.