• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.104-107
• /
• 1962

It is thought that the adsorption isotherms in dyeing of cellulose by the direct cotton dyes are consisted of combined type of Langmuir and Freundlich as the opinion of Fujino, et al;$[D]_F=ab[D]_S/(1+b[D]_S)+k[D]_S$where a,b,k; constants, $[D]_F$; dye adsorption on the fiber, $[D]_S$; dye concentration in the bath. This means that the dyes adsorbed in cellulose present in the state of partly mono molecular and partly aggregate; the characteristic fading order curve will be expressed as the combined system of uniform particle size distribution and assumed that the slope of the theoretical models of Baxter, et al., and assumed that the slope of curve will be changed near the point of a, the saturation value of Langmuir isotherms in the above equation. Firstly, the theoretical fading rate curve was treated with small colour difference as the one step of experimental of above consideration.

• Korean Journal of Human Ecology
• /
• v.9 no.3
• /
• pp.63-68
• /
• 2006

Walnut colorants were extracted from walnut hull and their dyeing properties on cotton were investigated. Effect of dyeing conditions on dye uptake and effect of mordanting on dye uptake, color change and colorfastness were explored. Walnut colorants showed low affinity to cotton compared with wool and its isotherm adsorption curve was Freundlich type. It was considered that hydrogen bonding and van der Waal's force were involved in the adsorption of walnut colorants onto cotton. The dyed cotton showed YR color and there was no significant color change as pH changed. The dyed cotton showed generally high colorfastness except fastness to washing and light. Mordanting did not improve dye uptake and colorfastness, and not affect color of the dyed cotton significantly.

• The Research Journal of the Costume Culture
• /
• v.22 no.3
• /
• pp.361-370
• /
• 2014

The fabric, 100% Silk, was dyed with Atractylodes japonica extract solution. The effects of concentration of extracts (colorant), temperature of dyeing, time of dyeing and pH of dye bath were studied. As the concentration of extracts increased, color strength (K/S value) increased progressively. The K/S values increased with raising temperature, time and proper conditions were $80^{\circ}C$ and 80 minutes. Maximum K/S value was obtained at pH 3. The K/S values of mordanted fabrics were increased with increasing mordant concentration up to specific values. Surface color of dyed and mordanted fabrics were yellowish. Light color fastness of fabric with mordanting was fairly good 3/4 rating. The mordanted silk fabrics showed excellent antibacterial activity. The silk fabric dyed with Atractylodes japonica extract showed a superior UV protective property.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.310-315
• /
• 2003

The dyeing of cotton fabric with Forsythia koreana NAKAI was investigated. The colorant was extracted with methanol under various concentrations of dyestuffs at $40^\circ{C}$ and $76^\circ{C}$. UV-VIS spectrum was obtained to find the maximum wavelength of colorant. Cotton fabrics were dyed at different temperatures, mordants, in pre and post mordanting methods. The maximum wavelength of spectrum were 390nm, 410nm, 440nm. The highest K/S value was showed at 100% dye concentration, extracted at $76^\circ{C}$ and dyed at $80^\circ{C}$. The mordant effect was not good in the K/S values. The light fastness was increased at Fe-pre mordant and Cr, Fe-post mordant.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.53-59
• /
• 2008

For the modification of wool surface, wool fabrics treated with oxygen low-temperature plasma(LTP) and dichloroisocyanuric acid(DCCA) were dyed with milling type acid dye. The difference of dyeing properties on modified and control wool fabric were investigated. DCCA treated wool showed that saturation dye uptake and dyeing desorption ratio were higher than LTP treated wool. Dyeing transition temperatures of DCCA and LTP treated wool fabrics were 20$^{\circ}C$ degree lower than control wool fabric. In light color fastness test, DCCA treated wool fabric was 1 grade lower than LTP or control wool fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.133-144
• /
• 1988

Silk fabrics were degummed and dyed in one bath under the condition of high temperature and high pressure and the results obtained were summerized as follows. 1. The degumming ratio is nearly the same as that of two bath method under the normal condition and the optimal condition is for 30 minutes at $120^{\circ}C$. 2. The dyeing absorption ratio is a little lower than that of two bath method. 3. The tensile strength and elongation are hardly shown the difference between two methods. 4. The fastness of the dyed fabric of one bath method is a little better than that of two bath method. (light, washing, rubbing) 5. The stiffness of the silk fabric treated by one bath method is a little harshier compare to that of two bath method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.268-274
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on silk fabric were investigated. Pomegranate colorants were characterized by FT-IR analysis. Effects of dyeing condition and mordanting on dye uptake, color change and colorfastness were explored. Pomegranate colorants showed high affinity to silk fiber and its isotherm adsorption curve was Langmuir type. Therefore, ionic bond was involved in the adsorption of pomegranate colorants on to silk fiber. Mordants except Fe did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on silk fabric, but the silk mordanted with Fe showed yellow red color. Fastness to washing, perspiration, and rubbing was not improved by mordanting treatment, but light colorfastness was increased by Fe mordant.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.73-82
• /
• 1996

The photochromic dye(spiroxazine, Blue) as a susceptible material was synthesized by condensing 1-nitroso-$\beta$-naphthol with indoline. The melting point of the synthesized spiroxazine dye was 254$^{\circ}C$. Irradiation with ultraviolet light had effect on reversible coloration reaction. The photochromic dye microcapsules were produced by in situ polymerization using urea-formaldehyde prepolymer. The average diameter of the microcapsule was 2.94$\mu$m. The dyeability and washing fastness of the photochromic microcapsule fibers were increased by the pretreatment of cationic agent.

• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.199-206
• /
• 2000

Silk fabric was dyed using methanol extract of Chrysanthemum boreale at $60^\circ{C}$ for 40min. The K/S value of the silk fabric was highest in the premordanting method, while the amount of absorbed mordant was largest in the Cu-mordanting. The surface colors of the dyed fabric highly depended upon mordants or mordanting methods. For all cases, the value of the dyed fabric was dark. The chroma was high by using the Cr-mordant and the color difference was distinct by using the Fe-mordant. Cu-mordanted silk showed highest fastness to light. Dyed silk fabrics by mordanting method showed good antimicrobial activity ad deodorization property.

• Journal of the Korean Society of Costume
• /
• v.56 no.6 s.105
• /
• pp.145-152
• /
• 2006

Dyeing properties of sargent cherry of Prunus sargentii Rehder were investigated with silk fabrics. The absorbed wave lengths at UV-VIS spectrometer were 362nm, 386nm, 430nm, and 512nm. The K/S value showed high in following conditions: 100%(w/w) stock solution, 60 minutes of dyeing time, 80$^{\circ}C$ of dyeing temperature, and 5 times of dyeing repetition. The K/S value showed higher in post-mordant than in pre-mordant, and the change of color did not appear in pre-mordant samples. They were colored greenish yellow in post-mordanted Cu and Fe. The highest dyeability and $\Delta$E showed in post-mordanted Fe. The light fastness showed 3-4 in post-mordanted Fe, 1-2 in pre-mordanted Al, and washing and perspiration fastnesses showed also good results in post-mordanted Fe.