• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.38-43
• /
• 2008

Significant portion of the fire accident is caused by some troubles in electric circuits. To prevent the fire induced by those electric trouble, some indications of electric fire need to be suitably detected at the first stage of the fire development. With this background, the characteristics of soot yielding of electric cables have been investigated using a light extinction method. In this study, a light scattering method was compared with the light extinction method. A slot-type premixed-flame combustor was traversed to bum three types of electric cables by compulsion, then the mass decrease rate and the soot densities were measured. According to the experimental results, the light scattering method is preferred to the light extinction method when the soot yield ratio is relatively small. Thus the former method is more suitable to detect the occurrence of an electric fire in a power distributer box.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.609-611
• /
• 2004

Sodium salt of photoluminescent Eu-containing polyoxometalate (Eu-POM) was newly synthesized and its chemical structure and physical properties characterized. The Eu-POM was unstable outside the pH range 5.5-8.5, and a pH just over 7 gave the best yield. We have investigated the photoluminescent properties of Eu-POM with changing the reactants ratio of heteropolytungstate and $EuCl_3{\cdot}6H_2O}$. The Eu-POM was characterized by UV/Vis, FT-IR, $^1H$-NMR, PL and XPS. Eu-POM emits orange light of 590nm when excited with the light of 280nm. Furthermore, we made dodecyltrimethylammonium (DDTA) salt of Eu-POM (Eu-POM/DDTA) by exchange of the counter cation. The Eu-POM/DDTA is soluble in common organic solvents, while Eu-POM is only soluble in water. And it emits reddish orange light of 625nm when excited with light of 250nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.92-92
• /
• 2010

Replacing the existing illumination with solid-state lighting devices, such as light-emitting diodes (LEDs) are expected to reduce energy consumption and environmental pollution as they provide better efficiency and longer lifetimes. Currently, white light emitting diodes are composed of UV or blue LED with down-converting materials such as highly luminescent phosphors White light-emitting diodes (LED) were fabricated with multi-shell nanocrystal quantum dots for enhanced luminance and improved stability over time. Multi-shell quantum dots (QDs) were synthesized through one pot process by using the Successive Ionic Layer Adsorption and Reaction (SILAR) method. As prepared, the multi-shell QD has cubic lattice of zinc-blend structure with semi-spherical shape with quantum yield of higher than 60 % in solution. Further, highly fluorescent multi-shell QD was deposited on the blue LED, which resulted in QD-based white LED with high luminance with excellent color rendering properties.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.291-294
• /
• 2006

Studies of the effectiveness of anthraquinone (AQ) in kraft-AQ pulping in terms of its mechanism of mass transfer have been conducted. Experiments performed have demonstrated an 'apparent solubility' of AQ in caustic solutions of wood lignin. The adsorption behavior of AQ species was also analyzed. Anthraquinone-2-sulfonic acid (AQ-S), a water-soluble derivative of AQ, showed selective adsorption on wood. A mechanism for the transport of AQ into wood chips during kraft pulping are proposed, and some explanations for previously unexplained observations are addressed.

• Current Optics and Photonics
• /
• v.8 no.2
• /
• pp.192-200
• /
• 2024

Wheat stripe rust, caused by Puccinia striiformis, has reduced winter wheat yield globally for ages. In this work, multi-spectral Mueller matrix imaging with 37 measurements using the method of double rotatable quarter-wave plates was used to investigate wheat stripe rust. Individual Mueller matrix measurements were performed on incident monochromatic light with nine bands in the range of 430 to 690 nm. As a result, it was found that the infected area absorbed linearly polarized light and was sensitive to circularly polarized light in the spectral domain. Both linear depolarization and linear diattenuation images distinguished between wheat stripe rust and healthy tissue. The responsiveness of stripe rust to polarized light reveals the potential of using polarization imaging to detect plant diseases. This further suggests that the multi-spectral Mueller matrix imaging system provides us with an alternative approach to agricultural disease detection.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.524-530
• /
• 2009

In the post-beam structure, the infilled light-frame construction provides most shear strengths. Shear properties of the light-frame structure can be estimated from the shear properties of nailed connection for the sheathings, and those of nailed connections can be done from nail bending strengths. For the basic study to predict the yield strength and the slip modulus of a nailed sheathing shear wall, those of a nailed joint were examined from nail bending strengths. To estimate shear properties of a nailed connection, referenced bearing strength and bearing constant for the wood members and the experimental nail bending strengths of the helically threaded nail were applied. The yield strength using the diameter at grooves instead of shank diameter was well coincided with the experimental value, but the slip modulus was estimated much smaller. The effective factors, specific gravity for the main member, withdrawal by nail head diameter to the side member, and embedment and moment at the nail head were considered, and further examinations are needed for the precise prediction of the nailed connections.

• Journal of Plant Biotechnology
• /
• v.48 no.1
• /
• pp.62-70
• /
• 2021

We analyzed the growth and quality characteristics of barley sprouts grown under artificial light sources consisting of a fluorescent lamp or light-emitting diode (LED) in an aquaculture system (grown with water only, without nutrients). At the end of the observation period, the shoots grown under the fluorescent lamp treatment were the longest, followed by the LED treatment and natural light-treatment. It was also observed that growth was faster for sprouts subjected to a non-sterilizing treatment than those subjected to a 70% ethanol treatment. As the seed sowing rate for planting trays increased, the yield of harvested barley sprouts increased; among light treatments, the natural light treatment resulted in the lowest yield, while the fluorescent light treatment resulted in the highest. The total phenol and total flavonoid contents of extracts of the barley sprouts were highest for the natural light treatment, but TEAC and FRAP were both highest for the fluorescent lamp treatment. The essential amino acid content ranged from 41.64 to 45.93 mg/g and was relatively higher for the natural light treatment than the other two treatments, while the content of non-essential amino acids was highest for the LED treatment. The total amino acid content was highest for the LED treatment at 97.47 ± 6.30 mg/g, for which the content of non-essential amino acids (53.17%) was higher than that of essential amino acids (46.83%).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.292-298
• /
• 1997

To compare the growth pattern of ginseng plant under between conventional shading(light transmittance rate 3％) and polyethylene net shading(light transmittance rate 10％), the distribution of leaf area, specific leaf weight (S. L. W), leaf and stem dry weight and changes in light intensity were investigated in 2, 4 and 6 year old ginseng plant populations. Light transmittance rate(L.T.R.) was 3％ at front line, 2％ at middle line and 1.5％ at rear line under conventional shading but it was 12, 10 and 8％ under polyethylene net(P.E) shading, respectively. In 2 year old population, there was a little difference in the growth characteristics investigated between conventional and P.E. shading. In 4 year old field, the leaf area, stem and leaf dry weight decreased in large amount in the order of middle, and rear line on ridge under conventional shading, but with a little difference under P.E. shading. And these trends enlarged in 6 year old field with appearance of a large part of shoot over furrow from ridge planted ginseng. Root yield index was much lowered at the rear 3rd, 4th and 5th line of the conventional shading bed, but there was no yield difference among lines except 5th lines under the P.E. shading with higher yield by 28％ than conventional shading.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.205-209
• /
• 2018

The spectral composition of light can affect the growth and biochemical composition of photosynthetic microalgae. This study examined the use of light filtering through a solution of soluble colored additives, a cost-effective method to alter the light spectrum, on the growth and lipid production of an oleaginous microalga, Nannochloropsis gaditana (N. gaditana). Cells were photoautotrophically cultivated under a white light emitting diode (LED) alone (control) or under a white LED that passed through a solution of red and yellow color additive (4:1 ratio) that blocked light below 600 nm. The specific growth rate was significantly greater under filtered light than white light ($0.2672d^{-1}$ vs. $0.1930d^{-1}$). Growth under filtered light also increased the fatty acid methyl ester (FAME) yield by 22.4% and FAME productivity by 80.0%, relative to the white light control. In addition, the content of saturated fatty acids was greater under filtered light, so the biodiesel products had better stability. These results show that passing white light through an inexpensive color filter can simultaneously enhance cellular growth and lipid productivity of N. gaditana. This approach of optimizing the light spectrum may be applicable to other species of microalgae.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.5 no.1
• /
• pp.65-68
• /
• 1969

Studies wre made to investigate the relationships obetween measurable characters of leaf tobacco such as stem length, stem daimeter, number of leaves, leaf length, leaf thickness, leaf area of biggest leaf and the dry Iield. The results are summarized as follows; n the flue cured yellow tobacco; leaf width and leaf area of biggest leaf were significantly correlated to the yield. In the light air cure type of tobacco; stem diamer, leaf width and leaf area of biggest leaf were significantly correlated to the yield. In the dark air cured type of tobacco; stem diameter, number of leaves, leaf length, leaf width, and leaf area of biggest leaf were significantly correlated to the yield. It would be noticiable that the yield was significantly correlated to the leaf width which is easily measurable in the field, and negatively correlated to the leaf thickness though not significantly.