• Journal of Photoscience
• /
• 제8권3_4호
• /
• pp.105-112
• /
• 2001

Susceptibility to low temperature photoinhibition in photosynthetic apparatus was compared among three cucumber cultivars, Gahachungjang (GH), Banbaekjijeo (BB) and Gaeryangsymji (GR). By chilling in the light for 6 h, a sustained decrease in the potential quantum yield (Fv/Fm) and the oxidizable P700 contents was observed, and the decrease was less in GH than in BB and GR. Although the difference was small, some $\Phi_{PSII}$ remained in GH after light-chilling for 6 h indicating that a few electrons can flow around photosystem II(PSII). As a consequence, the primary electron acceptor of PSII, $Q_{A}$, was reduced slowly and was not fully reduced after light-chilling for 6 h in GH. Although the amplitude was small, the development of NPQ was also faster in GH, indicating a higher capacity for non-photochemical energy dissipation. The relative fraction of a fast relaxing component of NPQ (qf) was higher in GH. After light-chilling for 5 h, the values of qf in BB and GR became much smaller than that in GH, indicating BB and GR suffered more significant uncoupling of ATPase and/or irreversible damages in PSII. When fluorescence induction transients were recorded after chilling, significant differences in quenching coefficients (qQ and qN) were observed among the three cultivars.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제40권2호
• /
• pp.51-55
• /
• 2020

A new silkworm variety, Juhwangjam, was bred for the producing of light pink colored cocoon. The Juhwangjam variety was selected and succeeded from the F1 of 2303 × BP Heehong in 2016 autumn. Hatchability (96%) and pupation percentage (97.6%) of Juhwangjam was matched to the authorization criteria for commercial silkworm variety. Laval period and other economical characters of Juhwangjam were similar to the authorized silkworm variety, Goldensilk. Cocoon yield of Juhwangjam in spring and autumn season was 20.0 and 14.3 kg, respectively. Therefore, a new silkworm variety, Juhwangjam for light pink cocoon, might be adaptable to culture in spring season rather than autumn season.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.393-394
• /
• 2008

$TiO_2$ is a wide band-gap semiconductor (3.4 eV) and can only absorb about 5% of sun light in the ultraviolet light region, which largely limits its practical applications because of the lower utility of sun light and quantum yield. In order to move the absorption edge of $TiO_2$ films to visible spectrum range, we have made the impurity level within a band-gap of $TiO_2$ thin film by introduction of oxygen vacancy. Oxygen-defected $TiO_2$ thin film have prepared by reactive sputtering with the partial pressure of Ar:$O_2$=10:90~99.33:0.66 ratio. As a result, we could have the impurity level of about 2.75 eV on condition that oxygen partial pressure is below 7%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.398-399
• /
• 2006

$TiO_2$ is a wide band-gap semiconductor (3.4 eV) and can only absorb about 5% of sun light. in the ultraviolet light region, which largely limits its practical applications because of the lower utility of sun light and quantum yield. In order to move the absorption edge of $TiO_2$ films to visible spectrum range, we have made the impurity level within a band-gap of $TiO_2$ thin film by introduction of oxygen vacancy. Oxygen-defected $TiO_2$ thin film have prepared by reactive sputtering with the partial pressure of Ar:$O_2$=10:90~99.33:0.66 ratio. As a result, we could have the impurity level of about 2.75 eV on condition that oxygen partial pressure is below 7%.

• ALGAE
• /
• 제24권2호
• /
• pp.121-127
• /
• 2009

The unicellular green alga, Haematococcus pluvialis, accumulates the highest level of astaxanthin among knownastaxanthi.n-producing organisms. Light is the most important factor to induce astaxanthin by H. pluvialis. BIue andred LEDs, whose ${\lambda}_{max}$'s are 470 and 665 nm, respectively, were used for internally illuminated light sources.Fluorescent lamps were also used for both internal and external illumination sources. The astaxanthin levels in thesevarious lighting systems were analyzed and compared each other. The cultures under internally illuminated LEDsaccumulaled 20% more astaxanthin than those under fluorescent lamp. Furthermore, LEDs generated much lessheat than the fluorescent lamps, which gives one more reason for the LEDs being a suitable internal Light source forastaxanthin induction. The results reported here would lead novel designs of photobioreactors with improvementsof illumination methods for high level of astaxanthm production. The maximum astaxanthin concentrations as wellas the astaxanthin yield per supplied photon were increased by at least 20% when blue or red LEDs were supplied.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.317-321
• /
• 2006

The investigation of the formation of organic sulfur compounds (i.e., odor species), mainly methyl mercaptan and demethyl suifide, during kraft pulping has been conducted, in which both hardwood and softwood species were used. It was discovered that there is an organic sulfur compounds formation phase transition point with respect to delignification extent. The transition point occurs at a kappa number of approximately 35 and 20 for softwoods and hardwoods, respectively. The results also showed that both low sulfidity and anthraquinone (AQ) addition are helpful to control the formation of theses organic sulfur compounds during kraft pulping. Whereas Hexenuronic acid (HexA) has contribution to Kappa number, the extended delignification not only lead to low pulp yield, but also be adverse to odor control. A significant in-digester odor reduction can be achieved if the pulping is to be terminated before phase transition point and combined with AQ addition.

• 한국환경과학회지
• /
• 제30권1호
• /
• pp.57-67
• /
• 2021

Photocatalytic green energy H2 production utilizing inexhaustible solar energy has been considered as a potential solution to problems of energy scarcity and environmental contamination. However, the design of a cost-effective photocatalyst using simple synthesis methodology is still a grand challenge. Herein, a low-cost transition metal, Cu-loaded one-dimensional TiO2 nanorods (Cu/TNR) were fabricated using an easy-to-use synthesis methodology for significant H2 production under simulated solar light. X-ray photoelectron spectral studies and electron microscopy measurements provide evidence to support the successful formation of the Cu/TNR catalyst under our experimental conditions. UV-vis DRS studies further demonstrate that introducing Cu on the surface of TNR substantially increases light absorption in the visible range. Notably, the Cu/TNR catalyst with optimum Cu content, achieved a remarkable H2 production with a yield of 39,239 µmol/g after 3 h of solar light illumination, representing 7.4- and 27.7-fold enhancements against TNR and commercial P25, respectively. The notably improved H2 evolution activity of the target Cu/TNR catalyst was primarily attributed to its excellent separation and efficiently hampered recombination of photoexcited electron-hole pairs. The Cu/TNR catalyst is, therefore, a potential candidate for photocatalytic green energy applications.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.1-5
• /
• 2022

We presented a micro hemi-sphere structure flexible film to improve the external quantum efficiency (EQE) in OLEDs. The micro hemi-sphere flexible film was fabricated with breath figure (BF) method and replica process. At 45 mg/mL of concentration, the size of the hemi-spheres was approximately 6.2 ㎛ were obtained which are the most circular shape. So, it was possible to yield the best performance with an improvement of 33 % in the EQE and the widest viewing angle ranging from 0° to 70°. As a result, the hemi-sphere film's size and distribution seem to play important roles in enhancing the EQE in OLEDs. Furthermore, the flexible hemi-sphere film based on polymeric materials could offer an effective, large-scale, mass-produced product and a simple process and approach to achieve high efficiency in flexible OLEDs.

• 한국작물학회지
• /
• 제48권4호
• /
• pp.292-296
• /
• 2003

The lateral root formation in soybean sprout culture declines its quality. This study was done to measure the effect of fluorescent light treatment during 24 hour imbibition and 6-day culture on seed germination and growth of soybean sprout. After 6 day culture, the sprouts were sorted as normal (＞4cm), abnormal (＜4cm) and non-germination by their hypocotyl lengths, and lateral roots, fresh and dry weights were measured. Lateral roots were less formed in the fluorescent light treatment lasted during the whole period of the imbibition than in the treatment for 50 minutes a day during the culture. The fluorescent light treatment during the imbibition mainly affected the germination and growth compared to the treatment done during the culture. Compared to the dark imbibition, the light treatment during the imbibition resulted in more normal sprouts, thicker diameters of hypocotyl and hook, and more fresh weights in cotyledon, hypocotyl, whole sprout, and economic yield. However, these results were reverse in lengths of hypocotyl and root, and fresh and dry weights of roots. It is concluded that the fluorescent lamp mainly irradiating red and blue lights can be used for the sprout production as an alternative light replacing blue and red lights treated during the imbibition because it blocked the lateral root appearance and stimulated growth of the sprout.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.548-561
• /
• 2020

Paecilomyces japonica is widely cultured to produce mycelium for medicinal and health food use. Illumination is an important factor in the growth and production of mycelium in submerged culture. The effects of different light-emitting diode (LED) combinations on the growth and cordycepin content as bioactive substances of mycelium were investigated. The results showed that the mycelium dry weights were lower under dark condition and red LED treatments. Dark condition, fluorescent light, and ultraviolet-A failed to increase the cordycepin content. Blue light was necessary to increase the cordycepin content, and a red-to-blue ratio of 3:7 induced the highest cordycepin content. The cordycepin contents of mycelium in submerged culture were significantly higher in a 12 h/day illumination time under red and blue (red-to-blue ratio of 3:7) LED treatments, showing an increase of up to 38% compared with those under the fluorescent-light control condition. The results demonstrated the roles of light with different wavelengths on the biosynthesis of cordycepin as bioactive substances. The low-heat release and replacement of traditional fluorescent lights with low-energy-consuming LEDs could increase the contents of bioactive substances. After optimization of the cordycepin production using response surface methodology (Box-Behnken design) to its canonical form, the optimum combination was found to be as follows: illumination time = 17.7 h/day, sugar content in the medium = 9.7 g/50 mL, and incubation time = 61.2 h. The model predicted a maximum response of 3779.2 ㎍/mL cordycepin yield.