• Corrosion Science and Technology
• /
• v.15 no.6
• /
• pp.265-270
• /
• 2016

The ellipso-microscopic observation of a titanium surface undergoing anodization in $0.05mol\;dm^{-3}$ of $H_2SO_4$ was conducted. During irradiation by ultra-violet (UV) light with a wavelength of 325 nm, the titanium surface allowed for the flow of a photo-induced current and showed up as a bright, patch-like image on an ellipso-microscopic view. The brightness and patch-pattern in the image changed with flowing photo-induced current. The changes in the brightness and the image corresponded to the formation and/or degradation of titanium oxide due to the photo-electrochemical reaction of the oxide. An in situ monitoring using the ellipso-microscope revealed that the film change was dependent on the irradiation light power, by UV-light increases the anodic current and results in the initiation of pitting at lower potentials as compared with the non-irradiated condition.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.133-137
• /
• 2003

When a light is projected upon a material, part of its radiation energy is absorbed and the rest is reflected or transmitted according to the nature of the material. The molecules of the substance absorbing a light obtains the radiation energy to the wavelength of the light to make photochemical degradation by ultraviolet ray or thermal reactions like physical damage by infrared ray. The degree of damage by radiation energy varies to the substances of materials, the spectral power distribution of the light source and the duration of irradiation. Because the damage brings about a devaluation of material and once damaged, it is irretrievable, it is necessary to minimize the damage and conserve the native quality of a material by a protective lighting system. A measuring system was set up to measure the temperature rise of each sample by infrared radiation from light sources. And the temperature rise and temperature distribution by various infrared lamps were measured with varying time.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.198-198
• /
• 2003

Two microscopic particles irradiated by light field influence each other by the forces coursed by the dipole-dipole interaction. The interaction changes also the resonance frequencies of the particles. We show that the dipole forces between atoms, molecules or dielectric particles irradiated by laser light play an important role at distances between the particles about or less the light wavelength. We discuss the properties of the near-field forces, including their dependence on direction and polarization of the laser light. We conclude that the near-field forces can be responsible for farmation of dimers in dense atomic gases. The near-field forces can be also used for control the motion of dielectric particles on micro and nanometer scale.

• Journal of Digestive Cancer Research
• /
• v.7 no.2
• /
• pp.31-39
• /
• 2019

The early detection of early gastric cancer (EGC) is important. However, the sensitivity of conventional white light imaging (WLI) in detecting EGC had been reported to range only from 77% to 84%. Although the resolution of endoscopes has been remarkably developed, precancerous lesions such as adenomas and microscopic early cancers are difficult to diagnose with general endoscopy. Linked Color Imaging (LCI) magnifies the differences in color for easy detection. Therefore, it produces a bright image from a distance and is performed for screening endoscopy. The 410 nm wavelength of BLI (Blue Light Imaging) helps to detect cancer by showing microstructure and microvessels in the mucosal superficial layer. This review will focus on the utility of Image enhanced endoscopy (IEE) techniques in diagnosis of gastrointestinal cancer.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1410-1412
• /
• 2004

Light flickering is caused by the degradation of power quality in electric train and can be measured by electronic illuminometer. This paper has shown the relations between voltage variations and illumination of lamps which has two kinds of incandescent lamp and 3-wavelength fluorescent lamp.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.160-167
• /
• 1996

A new pathlength deviation detection technique which is composed of michelson interferometer is described and verified experimentally. The technique uses a sub-threshold biased visible laser diode of 20$\mu$m coherence length as a low-coherent light source. And for zeroth-order fringe(which is the largest among fringes) identification we used a piezoelectric transducer with a large modulation smplitude, which enables without the need of constant velocity scanning, to distinguish reflection surfaces separated by more than 10$\mu$m with a resolution of less than half-wavelength.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.2
• /
• pp.56-62
• /
• 1985

It is desirable to establish a fundamental basis of dye laser technology in korea. Except the special wavelength mirrors, all parts of the dye laser were assembled using domestically available materials and the interior technology. The characteristics of pumping light of Ar discharge tube, fluorescence light of Rhodamine 6G and output pulses of the homemade dye laser were investigated by means of CRO and spectroscopic analysis.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1358-1360
• /
• 1998

In this paper, organic thin film LED(light emitting diode) having ITO glass/$Alq_3$/Al structure using an $Alq_3$ was fabricated by the vacuum evaporation and the absorbance, wave length, 1-V characteristics were investigated. Electroluminescence of green and wavelength of 510[nm] were observed in this device. We observed absorbance form 320[nm] to 430[nm] and knew unstability of $Alq_3$ material as light emitting device.

• Photonics industry news
• /
• s.17
• /
• pp.10-19
• /
• 2003

We have developed a single integrated wavelengh selection type - 8channel light source module. This module oscillates in 8 wavelengh at 200GHz(1.6nm) ITU channel intervals within the c-band (1530~1560nm), and can transmit at 1.25Gbps level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.439-442
• /
• 1998

In this paper, organic thin film LED(light emitting diode) having ITO glass/Alq$_3$/Al structure using an Alq$_3$ was fabricated by the vacuum evaporation and the absorbance, wave length, I-V characteristics were investigated, Electroluminescence of green and wavelength of 510[nm] were observed in this device. We observed absorbance form 320[nm] to 430[nm] and knew unstability of Alq$_3$ material as light emitting device.