• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.1-6
• /
• 2016

In this year, Koreans have a shortage in agricultural and drinking water due to severe algal blooms generated in major lakes. Waste oyster shells were obtained from temporary storage near the workplace at which oysters were separated from their shells. Heating ($1000^{\circ}C$ for 1 h in air) was employed to convert raw oyster shell powders into calcium oxide powders that reacted efficiently with phosphorus and nitrogen to remove algal blooms from eutrophicated wastewater. As the dispersed amount of heated oyster shell powders was increased, water clarity and visual light penetration were improved. Coagulation, precipitation and carbonation process of the heated oyster shell powders in a water purifier facilitated removal of eutrophication nutrient such as phosphorus and nitrogen, which is both beneficial and economically viable. $CO_2$ implantation by carbonation treatment not only produced thermodynamically stable CaO in oyster shells to derive precipitated calcium carbonate (PCC) but also accelerated algal removal by activation of coagulation and precipitation process. The use of oyster shell powders led to a mean reduction of 97% in total phosphate (T-P), a mean reduction of 91% in total nitrogen (T-N) and a maximum reduction of 51% in chemical oxygen demand (COD), compared with the total pollutant load of raw algal solution. Remarkable water quality improvement of algal removal by heated oyster shell powders and PCC carbonation treatment will allow utilization as water resources to agricultural or industrial use.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.52-71
• /
• 2020

This study examines the color characteristics of the usage of the color pink in menswear by analyzing its usage status and method. It involves an empirical research method establishing the frame of the study through a document study centered on trend, gender neutral considerations, and the utilization of the color pink in men's fashion, by analyzing the characteristics of color and tone by extracting the pink color shown in menswear collections as well as analyzing and categorizing the fashion image and genderless characteristics. Analyzing the color and tone of the pink color shown indicate that bright, light and pale tones had higher proportions. Pink color can also be said to be utilized as a design element that gives off a younger and more vital color image in menswear. Further, the use of brighter and softer pink colors can be interpreted as reflecting modern society's demands of masculinity to change into a more sophisticated and soft image. To analyze the characteristics of the color pink utilized in gender neutral fashion, fashion images were presented as the analysis standard. An image grouping technique was used to classify pink while utilizing genderless types-fashion style. The result showed that even with the same pink color, the fashion image can vary with different methods of expression in terms of clothes and styling. The results of this study can serve as basic data for planning fashion design concepts as it analyzed pink-using fashion images and the genderless concept type.

• 정보과학회 논문지
• /
• 제44권5호
• /
• pp.439-448
• /
• 2017

대규모 HPC 과학 응용의 워크로드가 전체 실행시간 동안 다양하게 변화하는 자원 요구사항을 갖게 되면서 특정 시점에 갑자기 요구사항이 증가하는(bursty) 형태가 되고 있다. 그러나 이러한 응용 워크로드를 고려하지 않고, 최대 자원 요구사항만을 반영한 가상 자원의 오버-프로비저닝은 과학 응용의 성능을 보장하지만 다른 응용이 사용할 수 없는 유휴 자원을 늘리는 문제로 남아있다. 본 논문에서는 OS-level 가상화 환경에서 응용의 자원 사용 패턴에 대한 프로파일링 데이터를 기반으로 메모리 자원 재구성 기법을 제안한다. 이는 유휴 상태의 메모리 자원을 신속하게 풀어주어 새로운 응용이 자원을 사용하여 수행할 수 있도록 한다. 본 연구에서는 경량화된 OS-level 가상화 시스템의 하나인 Docker에서 과학 워크플로우 응용을 이용하여 제안하는 알고리즘을 검증하였다. 실험을 통해 과학 응용을 실행하는 동안 컨테이너에 대한 메모리 할당 미세 조정이 전반적인 메모리 자원 활용을 향상시킬 수 있음을 보였다. 또한 응용의 메모리 사용 프로파일 데이터를 기반으로 하는 시뮬레이션 실험을 통해, 제안하는 동적 메모리 할당 기법을 사용하는 경우 대기 작업에 유휴상태의 메모리를 할당하여 전체 대기 작업의 수를 줄이고 시스템 작업 대기 시간이 줄어들었음을 보였다.

• 한국농공학회논문집
• /
• 제51권5호
• /
• pp.1-8
• /
• 2009

Photobioreactor (PBR) that houses and cultivates microalgae providing a suitable environment for its growth, such as light, nutrients, CO2, heat, etc. is now getting more popular in the last decade. Among the many types of PBRs, the bubble column type is very attractive because of its simple construction and easy operation. However, despite the availability of these PBRs, only a few of them can be practically used for mass production. Many limitations still holdback their use especially during their scale-up. To enlarge the culture volume and productivity while supplying optimum environmental conditions, various PBR structures and process control are needed to be investigated. In this study, computational fluid dynamics (CFD) was economically used to design a bubble-column type PBR taking the place of field experiments. CFD is a promising technique which can simulate the growth and production of microalgae in the PBR. To study bubble column PBR with CFD, the most important factor is the possibility of realizing bubble. In this study, multi-phase models which are generally used to realize bubbles were compared by theoretical approaches and comparing in a 2D simulation. As a result, the VOF (volume of fluid) model was found to be the most effective model to realize the bubbles shape as well as the flow inside PBR which may be induced by bubble injection. Considering the accuracy and economical efficiency, 0.005 second time step size was chosen for 2.5 mm mesh size. These results will be used as criteria for scale-up in the PBR simulation.

• 한국조경학회지
• /
• 제15권2호
• /
• pp.139-148
• /
• 1987

Exochorda serratifolia, broad-leaved shrub has beautiful flowers and is resistant to cold, shade and decease. New this native plant is considered to be worth being exploited as the outstanding plant for landscaping and horticulture. So this study was executed to utilize Exochorda serratifolia as the planting material for landscaping and horticulture through the survey of its habitat environment and the experimennt of its seed physiology and germination, vegetative propagation, culture and utilization, etc.. The results are as follows ; 1. The color of the flower is white, blooming in the early and middle of May and the seeds ripen late in Sep.. 2. The elevation, elevation, gradient and direction of the native habitat were 250m, 20-25$^{\circ}$and northern side respectively. 3. The soil pH of the natural habitat was 5.3 and soil fertility was poor. 4. Exochorda serratifolia appeared as indicator within P. densiflora community and its neighboring species were Q. mongolica, Q. dentata, R. mucronulatum, L. obtusiloba, E. oxyphillus, C. heterolphylla, var thunbergii, etc.. 5. The optimum temperature for seed germination was found at 20$^{\circ}C$ and the longer the stratification period at 5$^{\circ}C$ was, the lower the germination rate was. 6. The treat merits of GA and Kinetin increased the seed germination rate, especially under the dark condition but their high concentrations decreased the seed germination rate. 7. The rooted rate of the greenwood cutting was the highest at IBA 100ppm plot of vermiculite bed but its high concentration decreased the rooted rate conspicuously. 8. In the tissue culture, the each 1.0 ppd plot of NAA, Kinetin and NAA 1.0ppm + Kinetin showed the best growth. And the mixture of NAA 1.0ppm and Kinetin showed better growth than the single treatment of NAA or Kinetin did. 9. Transplanted Exochorda serratifolia showed healthy growth with shaded environmental condition(42.1% light intensity), therefore they can be cultivated as a shade tolerant landscape plant. 10. It was considered that Exochorda serratifolia was applicable to group planting at shade places or under trees in parks, homes, etc..

• 자원리싸이클링
• /
• 제16권2호
• /
• pp.32-39
• /
• 2007

폐자동차 ASR의 소각재를 대상으로 물리화학적 물성측정 및 리싸이클링을 위한 경량재료 제조실험을 수행하였다. 대상시료는 국내 ASR 소각장에서 채취한 바닥재 2종류와 비산재 4종류이었으며, 이들의 주요 성분 및 입도분석을 실시하고 공정시험법에 의한 중금속 용출량을 조사하였다. 또한, 비산재인 boiler ash를 원료로 하여 경량물질과 무기바인더를 첨가하여 성형 및 소성하는 방법으로 경량재료를 제조하였다. 바닥재에 Cu 함량이 3wt% 내외로 상당히 높은 것으로 나타나 Cu의 사전 분리가 필수적인 것으로 나타났다. 수용성물질을 많이 함유한 SDR(semi-dry reactor) ash와 Bag filter ash의 주성분은 각각 $CaCl_2{\cdot}Ca(OH)_2{\cdot}H_2O$ 및 $CaCl_2{\cdot}4H_2O$인 것으로 나타났다. boiler ash를 원료로 사용하여 제조한 경량재료 시편의 경우 중금속 용출이 크게 감소하였으며, 그 이유는 중금속 성분이 불용성 화합물천 안정화 또는 encapsulation 되었기 때문으로 판단되었다.

• 한국식물병리학회지
• /
• 제11권4호
• /
• pp.353-360
• /
• 1995

Tests were performed on 232 bacterial strains (71 strains of Pseudomonas tolaasii and 161 white line reacting organisms, WLRO) isolated from cultivated mushrooms. As results, P. tolaasii was divided into 5 groups on the basis of the phenotypical characteristics for the strains, and group 3 was the major one including 48 (62%) out of the total 71 strains. WLRO were classified into 23 groups, and group 10 was the major group (65 strains, 30% of the total WLRO tested). A white line was well formed at 22$^{\circ}C$ and at 4 mm distance between P. tolaasii and WLRO colonies in their dual culture on Pseudomonas agar F medium within 36-hr incubation, but not formed at $25^{\circ}C$ even for 72-hr incubation. The morphological, cultural and biological properties of P. tolaasii group 3, and the main group of WLRO, group 10, were different only in the light of pathogenicity. Also group 2 of P. tolaasii had the characteristics similar to group 24 of WLRO which was pathogenic to cultivated mushrooms, suggesting the P. tollaasiii and WLRO strains may be the same species although their white line forming ability and pathogenicity were more or less different from one another. Subculture of the strains in P. tolaasii group 1 induced the variation of their pathogenicity, white line forming ability and utilization of sodium benzoate and sodium tartrate, and thus it can be inferred that they were converted to strains having the characteristics of group 3 or WLRO groups.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.7-12
• /
• 2010

Morphological characteristics of hemp fiber were investigated using a light microscope in order to provide fundamental data for the use of hemp as a papermaking law material. Phloem of hemp is composed of cortical parenchyma cells and bast fiber with thick walls while xylem is composed of vessel, wood fiber and ray parenchyma cells. Also there are solitary pore and radial pore multiple which exist in diffuse porous pattern. Ray cells consist of uniseriate rays and thin walled ray parenchyma cells. Wood fibers are composed of three types: a large diameter fiber with longer length; a large diameter fiber with shorter length; a small diameter fiber with medium length. Vessel elements are composed of: a medium length one; a longer length one; the one whose both end walls have ligules or tails. Parenchyma cells in xylem and pit parenchyma cells have completely different size and shape. For bast fiber, the average length is about 4.4 mm and the width is about $30.5\;{\mu}m$; for vessel element, $600.0\;{\mu}m$ in length and $493.6\;{\mu}m$ in width; for wood fiber, $1000\;{\mu}m$ and $38.9\;{\mu}m$; for parenchyma cell, $50\;{\mu}m$ and $26.4\;{\mu}m$.

• 정보과학회 논문지
• /
• 제43권3호
• /
• pp.296-303
• /
• 2016

시스템 자원과 가용한 전력량이 한정적인 모바일 실시간 시스템은 시간제약의 만족뿐만 아니라 시스템 부하가 높을 때는 시스템 자원을 최대한 활용하고 시스템 부하가 낮을 때는 에너지 소모량을 줄일 수 있어야 한다. 멀티프로세서 실시간 스케줄링 알고리즘인 EDZL(Earliest Deadline until Zero Laxity)은 높은 시스템 이용률을 가지고 있으나 에너지 절감기법에 대한 연구가 매우 적다. 본 논문은 멀티코어 플랫폼에서 EDZL 스케줄링의 동적 전압조절(DVFS) 기법을 다룬다. 본 논문은 full-chip DVFS 플랫폼을 위한 동일속도와 per-core DVFS 플랫폼을 위한 개별속도 산정 기법을 제안한다. EDZL 스케줄 가능성 검사에 기반을 둔 이 기법은 단순하지만 효과적으로 태스크들의 수행속도를 오프라인에 결정할 수 있다. 또한 모의실험을 통하여 제안한 기법이 효과적으로 에너지를 절감할 수 있음을 보인다.

• 한국도로학회논문집
• /
• 제18권3호
• /
• pp.59-65
• /
• 2016

PURPOSES : This paper aims to develop a road pavement de-icing system using carbon sheet to replace the older snow de-icing method. Carbon sheet is a light and high-strength metal. Hence, various bodies of research for its applications in many industries have progressed. METHODS : The experiment was conducted in a laboratory. The carbon sheet supplied voltage through a power supply system, and produced heat transfers to the concrete surface. Various factors, such as pavement material, carbon sheet width, penetration depth, and freezing-thawing resistance, were considered in the conducted experiments to confirm the heating transfer efficiency of the carbon sheet. RESULTS : The carbon sheet used was a conductor. Therefore, it produced heat if voltage was supplied. The exposed carbon sheet on the atmosphere did not affect the carbon sheet width when it provided constant voltage. However, the sheet showed different heating behaviors by width change when the carbon sheet penetrated into the concrete. Moreover, the freezing-thawing resistance was decreased by the carbon sheet with increasing width. CONCLUSIONS : The experiments confirmed the possibility of developing a road snow melting system using a carbon sheet. The antiicing system using the carbon sheet to replace the traditional anti-icing system has disadvantages of environmental pollution risk and electric leakage. The pavement also improved its toughness resistance. The utilization value will be very high in the future if carbon sheet heat loss can be minimized and durability is improved.