• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.165-170
• /
• 2016

Nano-scale power splitter based on curved plasmonic waveguides are designed by utilizing the multimode interference (MMI) coupler. To analyze easily the adaptive properties of plasmonic curverd multimode interference coupler(PC-MMIC), the curved form transforms equivalently into a planar form by using conformal transformation method. Also, effective dielectric method and longitudinal modal transmission-line theory are used for simulating the light propagation and optimizing the structural parameters at 3-D guiding geometry. The designed $2{\times}2$ PC-MMIC does not work well for quasi-TM mode case due to the bending structure, and it does not exist 3dB coupling property, in which the power splitting ratio is 50%:50%, for quasi-TE mode case. Further, the coupling efficiency is better when the signal is incident at channel with large curvature radius than small curvature radius.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.122-126
• /
• 2012

The properties of Al-doped ZnO (AZO) films were investigated as a function of $H_2/(Ar+H_2)$ gas ratio using an AZO (2 wt% $Al_2O_3$) ceramic target in a radio frequency (RF) magnetron sputtering system. The deposition process was done at $200^{\circ}C$ and in $2{\times}10^{-2}$ Torr working pressure and with various ratios of $H_2/(Ar+H_2)$ gas. During the AZO film deposition process, partial $H_2$ gas affected the AZO film characteristics. The electron resistivity (${\sim}9.21{\times}10^{-4}\;{\Omega}cm$) was lowest and mobility (${\sim}17.8\;cm^2/Vs$) was highest in AZO films when the $H_2/(Ar+H_2)$ gas ratio was 2.5 %. When the $H_2/(Ar+H_2)$ gas ratio was increased above 2.5 %, the electron resistivity increased and mobility decreased with increasing $H_2/(Ar+H_2)$ gas ratio in AZO films. The carrier concentration increased with increasing $H_2/(Ar+H_2)$ gas ratio from 0 % to 7.5 %. This phenomenon was explained by reaction of hydrogen and oxygen and additional formation of oxygen vacancy. The average optical transmission in the visible light wavelength region over 90 % and an orientation of the deposition was [002] orientation for AZO films grown with all $H_2/(Ar+H_2)$ gas ratios.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.29-33
• /
• 2004

In this paper, we took the basic experiment in order to explore the characteristics of optical CT(optical current transformer) for measuring high current in a superhigh voltage condition using faraday effect and wrote that. We used the 1,310[nm] Laser Diode for the source of light and PIN-Photodiode for receiver. The transmission line of light was composed of the single-mode fiber of 30[m] which could maintain the state of polarization in the optical fiber. The range of current was from 400[A] to 1300[A]. In addition, the temperature ranged from $20[^{\circ}C}]\;to\;50[^{\circ}C]$. In a same experiment condition, a power magnitude increases in proportion as input current is increasing and temperature become low. The maximum ratio of error in temperature of $50[^{\circ}C]$ appears 0.15[%] and the 0.16[%], 1.24[%] and 0.07[%] is ratio of error in respectively $40[^{\circ}C],\;30[^{\circ}C],\;and\;20[^{\circ}C]$.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.341-348
• /
• 2013

We desinged and evaluated a remote-sensing sex pheromone trap for real-time monitoring of Mythimna separata (Lepidoptera: Noctuidae), a migratory insect in Korea. The system consisted of a modified cone-trap with a sex pheromone lure, a sensing module based on light interruption, a signal transmission module based on code division multiple access, a main electronic board for system control, a power supply based on a solar collector, a stainless steel-pole supporting the system, and a signal collection and display system based on an internet web page. The ratio (>92%) of the actual number of insects to the signal number in the remote-sensing trap was improved by sensing only within a limited period at night on the basis of the insect's circadian rhythm, control of signal sensitivity on the basis of sensing software programming, 1-h interval for signal transmission, and adjustment of the signal transmission program. The signal occurrence pattern in the remote-sensing trap was conclusively similar (correlation coefficient, >0.98) to the actual pattern of adult occurrence in the trap. The result indicated that the remote-sensing trap based on the attraction of the sex pheromone lure for M. separata has a promising potential for practical use. Occurrence of M. separata adults was observed several times in 2011 and 2012, and the peaks were sharp.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.423-430
• /
• 1994

We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit. Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and - 3 dB small signal response of more than 2.6 GHz. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of - 30.2 dBm was obtained through 47 km optical fiber transmission under the criterion of $1\times10^{-10}$ BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber. fiber.

• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.1
• /
• pp.33-39
• /
• 1972

For the increase of productivity, canopy structure and nutritional status in various productivity grades (high>700, medium>600 and low>500kg/l0a as head rice) were investigated in a study using Jinheung(Oryza sativa L.) for the increase of producticity with following results: 1. High yield plot showed greater leaf area and slow decrease of it after heading stage. While low yield plot had rapidly decrease of leaf area. 2. High yield plot showed higher light transmission ratio (LTR) durnig early grow stage, low LTR. during late grow stage, and higher leaf area per LTR. 3. Net assimilation ratio was decrease with the increase of leaf area index (LAI) and it was always higher in high yield plot. 4. High yield plant had greater amount of total nitrogen uptake, slow uptake rate, and considerable uptake after heading while low yield plant showed higher uptake of nitrogen in early stage of growth and no uptake after heading. 5. The percent ratio starch at heading to total at harvesting was 40% for low yield plant and 10% for highyield plant inderting that high yield depends much on past-heading starch synthesis. 6. Main factor determining secondary yield was ripened grain ratio.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.6
• /
• pp.434-438
• /
• 2008

To selection of optimal shading material, two-year-old ginseng (Panax ginseng C. A. Meyer) of new cultivar, 'Cheonpoong' (CP), and native species 'Hwangsookjong' (HS) were cultured under three kinds of shading materials such as three-layered blue and a one-layered black PE (polyethylene) net (TBSB), blue PE sheet (BS), and aluminium coated PE sheet (AS) in imperfectly drained paddy soil. Growth characteristics, yield and ginsenoside contents were investigated under three shading materials. Yield and ginsenoside contents of ginseng were distinctly affected by intensity and quality of sunlight penetrated through shading materials. Light transmission ratio, air and soil temperature according to shading materials were higher in order of BS, AS, and TBSB. However, ratio of aerial phase and porosity of the soil were higher in order of AS, BS, and TBSB, respectively. There was no significantly difference in the ratio of rusty colored root by shading materials. CP showed higher stem length, leaf area, and root weight than that of HS, while the former showed distinctly lower discolored leaf ratio than that the other. Eight kinds of ginsenosides content of CP were higher than that of HS in $Rg_1$, Re, Rf, $Rb_1$ and Rc except $Rg_2$, $Rb_2$, and $Rb_3$. Total ginsenoside contents of CP was distinctly higher than that of HS. Total ginsenoside contents as affected by shading materials was higher in order of BS, TBSB, and AS in CP, while TBSB, BS, and AS in HS.

• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.191-198
• /
• 1985

Sixty one commercial seed samples of three cruciferous vegetable crops were examined for seed-borne Alternaria spp. by deep freezing blotter method. Alternaria raphani, A. brassicicola and A. brassicae were detected from 7, 6 and 1 seed samples of chinese cabbage out of 20 with average infection ratio of 3.8, 1.8 and 0.5, respectively. A. raphani and A. brassicae were detected from 11 and 2 seed samples of radish out of 38 with average infection ratio of 7.2 and 1.0, respectively. A. brassicicola was detected from 3 samples of cabbage seed with average infection ratio of 21.8. Most of the Alternaria spp. detected were recovered from the seed coat and caused seed rot and seedling infections. A. brassicicola was recovered from the embryos of radish, chinese cabbage and cabbage in low infections and A. raphani was recovered from the embryos of radish. In inoculation experiments, A. brassicicola, A. brassicae and A. raphani produced black leaf spots on old leaves of three creciferous vegetable crops and the spots gradually increased in size appearing gray to light brown lesions which later coalesce and caused defoliation.

• Korean Journal of Optics and Photonics
• /
• v.29 no.6
• /
• pp.275-284
• /
• 2018

In this study we propose a hybrid color-filter design method in which a nanohole array and a nanodisk array are separated by nanopillars of the material AZ 1500. We propose a design method for an RGB color filter, using the tendency of transmitted light according to each design variable. Especially we analyzed the intensity distribution of the electric field in the cross section, and set the height of the nanopillars so that the local surface-plasmon resonances generated in the two different arrays do not affect each other. The optical characteristics of the optimized color filter are as follows: In the case of the red filter, the ratio of the wavelength band expressing red in the visible broadband is 55.01%, and the maximum transmittance is 41.53%. In the case of the green filter, the ratio of the wavelength band expressing green is 40.20%, and the maximum transmittance is 42.41%. In the case of the blue filter, the ratio of the wavelength band expressing blue is 32.78%, and the maximum transmittance is 30.27%. We expect to improve the characteristics of color filters integrated in industrial devices by this study.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.6-17
• /
• 2015

In this paper, colors of broadcast lightings composed of Red, Green, and Blue LED(Light Emitted Diode) can be linearly and quantitatively controlled in low illuminance. Because LED cannot emit uniform illuminance in low illuminance, the colors of RGB LED are unmixable. Furthermore, the illuminances are nonlinear with the dimming values of the RGB LED due to the nonlinearity of the output illuminance with the current through the LED. This nonlinearity generated errors of the target colors and illuminances. The proposed algorithm set up the target colors, which is expressed by the color coordinates in CIE 1931 color space, and the target illuminances. Then the illuminances of RGB LED were calculated using color mixing theory. The calculated illuminances determined the dimming values of the RGB LED for transmission via DMX512 communication. After the broadcasting lighting received the dimming values of the RGB LED via DMX512 communication,.RGB LED can emit target color and illuminance, and be controlled by calculating the PWM(Pulse Width Modulation) duty ratio of the hybrid LED driver which be considered the nonlinearity for the illuminances of the LED. As a result, the proposed algorithm can linearly and quantitatively control the colors and illuminances in full range of illuminance. Then we verify experimentally that the errors of the emitted color coordination x, y and illuminance are 2.27%, 3.6% and 1.5%, respectively.