• Korean Journal of Environmental Biology
• /
• v.22 no.1
• /
• pp.89-92
• /
• 2004

The effects of different light quality on the change of membrane potential difference (PD) of the guard cell in the intact leaf have been investigated. The mombrane PD was about -5.5 mV by white light of 600 $\mu$moles $m^{-2}\; s^{-1}$. The mean PD of change caused by red light was about -5.2 mV at the light intensity of 80 $\mu$moles $m^{-2}\; s^{-1}$. Membrane PD of guard cells in response to blue light was saturated at low light intensity. However, red and green light enhanced the change of membrane PD of guard cells with increasing intensity. In green light the biggest change of memrane PD was around -4 mV, whereas, with blue light the change of of memrane PD was around -2 mV. Accordingly, the membrane PD of guard cell showed the different degree of hyper-polarization by each wavelength.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1278-1280
• /
• 1995

A probe type fiber-optic sensing techique for electric current measurement is applied in this paper. The technique is based on the Faraday effect which meaning is that polarization state of light is rotated by magnetic field. In experiment, test wire is located at inside and outside of the probe to be measured. The experimental results prove not only linear property, but also polarization rotation property according to the distance from outside of probe.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.703-704
• /
• 2014

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.151-152
• /
• 2007

In this study, the optical porosity of $TiO_2$ films with helical structure deposited by glancing angle deposition (GLAD) were investigated. Helical films are of interest due to their ability to differentiate states of circularly polarized light. We designed and fabricated normal-incidence circular-polarization separator deposited by GLAD (Helical structure). The optical porosity of $TiO_2$ film deposited by helical method can be applied many optical coatings.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.314-316
• /
• 2008

We examine the surface alignment of liquid crystals (LC's) by a double linearly polarized ultraviolet (LPUV) light expose process. Exposing polarized light induces a surface anisotropy to polyimide (PI) layer surfaces and hence determines the alignment direction. LPUV exposes with angular difference of $45^{\circ}$ between two polarization directions make LC director change.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.41-42
• /
• 2000

Photosensitive polyimides containing cinnamoyl and coumarin side groups were synthesized in a high molecular weight, giving a good quality of films. Nematic liquid-crystal (LC) molecules on the film were aligned along the direction with an angle of $97-99^{\circ}$ respect to the polarization of ultraviolet (UV) light. The LC alignment was induced mainly by the photoaligned polymer chains made by the first UV-exposure even though the film was treated by multiple exposures with changing the polarization of UV light. From these results, it is concluded that the LC alignment on the film is induced by the photodimerization rather than the trans-cis photoisomerization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.490-491
• /
• 2007

We have investigated dielectric dispersion and absorption in organic light-emitting diodes using 8-hydroxyquinoline aluminum($Alq_3$) as an electron transport and emissive material. We analyzed the dielectric dispersion and absorption of organic light emitting diodes using impedance characteristics measurement by the auto-balancing bridge technique of ITO/$Alq_3$/Al. Impedance characteristics was measured complex impedance Z and phase e in the frequency range of 40Hz to $10^8Hz$. We obtained dielectric constant and loss tangent (tan $\delta$) of the device. From these analyses, we are able to interpret a dielectric dispersion and dielectric absorption contributed by an interfacial and orientational polarization.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.1-14
• /
• 1996

Effects of the external optical feedback on the optical transmission characteristics were evaluated for 3 kinds of commercialized DFB-LD modules for 2.5Gbps optical communication systems. As a result, intensity noise induced by external optical feedback via generating the external cavity modes deteriorated the transmission performances of sthe DFB-LD modules as much as 1.5dB, 1.2dB, and 1.0dB for the maximum feedback ratio of -8.8dB which corresponds to the worst reflection along the fiber transmission line. Additional penalty of 0.5dB was occurrred when state of polarization of feedback light was adjusted. From the experiments evaluating the isolation ratio of the single polarization optical isolator, decrease of the polarization dependent isolation ratio as much as 10dB from that of specification and the effective isolation ratio as much as 20dB from that of specification was mjor cause of high sensitivity of DFB-LD modules to external feedback. It was suggested that polarization independent optical isolator or single polarization optical isolator with isolation ratio specification of more than 40dB is required for 2.5Gbps DFB-LD modules with complete suppression of external feedback effects.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.275-276
• /
• 2007

A multiplex recording and reading technique in photopolymer are presented In order to record the polarization gratings, polarization-sensitive materials, in which linear birefringence is induced by irradiating the polarized light, are necessary. We checked orthogonal and independence of laser. The value of the photoinduced linear polarization had effect on diffraction properties in the holographic gratings. The grating strengths of two polarization are investigated and the relevant parameters for equal diffraction intensity readout are optimized.

• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.472-477
• /
• 2009

A Stokes polarimetry imaging (SPI) system was developed and utilized to detect tendon tears by constructing the degree of linear polarization (DOLP) image maps after linearly polarized light illumination. The micro and partial-thickness tears of turkey tendons were made and imaged by the SPI system at different incident polarization angles (IPA) with different mechanical loads on the tendon. The micro and partial-thickness tendon tears were detected by the DOLP images due to weak birefringence around the tears. The tendon tears were detected by a highest DOLP contrast at longest visible wavelength (Red, 650 ${\pm}$ 50 nm). All polarized images showed modulated DOLP as the incident polarization angle (IPA) was varied. The varying DOLP allowed the optimal detection of the micro and partial-thickness tendon tears at a certain IPA. The SPI system with variable IPA and spectral information can improve the detection of the tendon tears by higher visibility of fiber orientations, and thereby improve diagnosis and treatment of the tendon related injuries.