• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제34D권11호
• /
• pp.90-100
• /
• 1997

In this paper, we propose a new optical thresold generator as a key-stream genrator for stream cipher systems. The random key-bit stream is generated by a digital generator that is composed of LFSRs and nonlinear ligics. Digital implementatin of a key-stream generator requires large memory to implement programmable tapping points. This memory problem may be overcome easily by using the proposed optical system which has the proberty of 2D parallel processing.To implement hte threshold generator optically, we use conventional twisted nematic type SLMs (LCDs). This proposed system is based on the shadow casting technique for the AND operation between taps and sregister stages. It is also based on the proposed PMRS method for modulo 2 addition. The proposed PMRS method uses the property of light's polarization on LCD and can be implemented optically using one LCD and some mirrors. One of the major advantages of the proosed system is that there is no limitation of the number of the progarmmable tapping points. Therefore, the proposed system can be applied for the 2D encryption system which processes large amounts of data such as 2D images. We verify the proposed system with some simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제29권7호
• /
• pp.930-937
• /
• 2005

One of the useful technology for light-weightening of components required in the automobile and machine industry is to use of high strength materials. To improve material properties, carbonizing treatment, nitrifying treatment, and shot-peening method are representatively applied, However, the shot-peening method is generally used to remove the surface defect of steel and to improve the fatigue strength on surface. Benefits by shot peening are to make increase resistance against fatigue, stress corrosion cracking, fretting, galling, erosion and closing of pores. In this paper, investigated the effect of shot peening on the corrosion of SUP-9 steel immersed in $3.5\%$ NaCl solution and corrosion characteristics by the heat treatment during shot peening process. The immersion test was performed on the four kinds of specimens. Corrosion potential, polarization curve, residual stress and etc. were investigated from the experimental results.

• Korean Journal of Optics and Photonics
• /
• 제9권2호
• /
• pp.96-99
• /
• 1998

In this study, a novel long term stabilization method of optical feedback for the resonant cavity coupled semiconductor lasers is proposed, and its utility was shown experimentally. The proposed method is realized by using the pahse discriminator of optical feedback with high gain. The phase discriminating signal was obtained by the polarization spectroscopic technique using reflection light from the external reflector, which is a confocal Fabry-Perot cavity. Experimental result shows that stable control state can be maintained up to 20 hours. The period can be increased by reducing size of the system and/or fixing position stably of optical parts used, which were arranged on an optical table by using magnetic bases in this experiment. The proposed long-term stabilization method of optical feedack of a resonant external cavity coupled semiconductor laser is very useful for the field of high sensitivity measurement, and for the use in the laboratory level in particular.

• Textile Coloration and Finishing
• /
• 제18권6호
• /
• pp.49-56
• /
• 2006

Surface treatment using UV irradiation was carried out to improve optical properties of polarizing films. The effects of UV energy of the UV-treated PVA films were investigated by measuring reflectance, surface roughness, contact angles, ESCA, and ATR. Reflectance decreased at wavelength of 450 nm or less and surface roughness increased with increasing UV energy. Water contact angle increased in the irradiated PVA films and surface energy decreased with increase in w energy. An analysis showed that the OH groups were broken and some new groups were introduced such as C=C and C=O bonds together with increased $O_{1s}/C_{1s}$, resulting in the observed surface modification effect. Surface modified PVA polarizing films showed improvement in light transmittance of polarizing films at high wavelength region without deteriorating polarization efficiency, which was not affected by UV irradiation sequence during manufacturing processes such as coloring and drawing.

• Corrosion Science and Technology
• /
• 제7권5호
• /
• pp.243-251
• /
• 2008

Magnesium alloys become popular research topic in last decade due to its light weight and relatively high strength-to-weight ratio in the energy aspiration age. Almost all structure materials are supposed to suspend stress. Magnesium is quite sensitive to corrosive environment, and also sensitive to environmental assisted cracking. However, so far we have the limited knowledge about the environmental sensitive cracking of magnesium alloys. The corrosion fatigue (CF) test was conducted. Many factors' effects, like grain size, texture, heat treatment, loading frequency, stress ratio, strain rate, chemical composition of environment, pH value, relative humidity were investigated. The results showed that all these factors had obvious influence on the crack initiation and propagation. Especially the dependence of CF life on pH value and frequency is quite different to the other traditional structural metallic materials. In order to interpret the results, the electrochemistry tests by polarization dynamic curve and electrochemical impedance spectroscopy were conducted with and without stress. The corrosion of magnesium alloys was also studied by in-situ observation in environmental scanning electron microscopy (ESEM). The corrosion rate changed with the wetting time during the initial corrosion process. The pre-charging of hydrogen caused crack initiated at $\beta$ phase, and with the increase of wetting time the crack propagated, implying that hydrogen produced by corrosion reaction participated in the process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제29권3호
• /
• pp.175-180
• /
• 2016

In this study, we proposed an optical compensation method to improve the symmetricity of contrast ratio for wide viewing angle IPS (in-plane switching) LCD. First, the phase retardation depending on the thickness of compensation film is calculated, and then the phase change is presented at the $Poincar{\acute{e}}$ sphere. The phase retardation and the polarization state of the light passing through the optical elements are caculated by using the EJMM (extended Jones matrix method). In addition, the transmittance and the contrast countour are also calculated by using the Berremann's $4{\times}4$ matrix method. The simulation is carried out for a IPS LC cell with positive A/C/A compensation film. From the standard deviation of the contrast ratio, we confirmed the symmetricity at each viewing angle is inversely proportional to the standard deviation and calculated the optimum design condition of the uniaxial compensation film for the IPS LCD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제16권6호
• /
• pp.545-555
• /
• 1991

In this paper, We discuss optical implementation of new optical adaptive patern recognition system based on single layer perception with learning capability and associative memory model having error corrective capability. The single layer perceptron is optically implemented by using 2 D LCTV spatial light modulators through the nonlinear quantization and polarization encoding methods, and 2 D hopfield associative memory is also implemented by using multifocus holographic lens. From some experimental results on classfication of Arabic numbers into even & edd numbers, it is shown that the proposed system can classify the patterns to the right classes correctly even for the partial and erronenous input patterns. Accordingly, the proposed optical adaptive pattern recognition system can be suggested for practical application in the fields of image processing and pattern recognition.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제11권4호
• /
• pp.165-169
• /
• 2011

In recent years mobile phone handset terminal has tended to have additional various functions and slim and light weight, and its internal space is getting smaller and narrower. According to complex parts, small and narrow inner space is caused not sufficient bandwidth and lower impedance. Moreover, additional polarization loss by the surrounding parts produces is lower effectiveness and increases difficulties for getting the antenna gain. For IFA is low profile structure based on the ILA(Inverted L Antenna) which is transformed from the monopole antenna. While this antenna has lots of advantages in internal antenna of mobile phone, it has some disadvantage of reduced bandwidth and gains compared with monopole antenna. In this paper, propose vlade hybrid antenna use for the coupling structure.

• Korean Journal of Optics and Photonics
• /
• 제24권4호
• /
• pp.159-167
• /
• 2013

The liquid crystal(LC) display is the most promising technology of the flat panel displays covering all applications from small mobile to large television applications. To understand the operating principles and improve the performances of the various LC displays, one should grasp the anisotropic nature of the LC and the propagation of light in the anisotropic media. Basic formulas governing the distribution of the LC molecules, directly related to the electro-optic effects of the LC devices, are described in view of the macroscopic interaction. Based on the matrix representation, the polarization analysis for the LC devices is also presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제24권11호
• /
• pp.9-16
• /
• 2010

This paper examines the temperature characteristics of an Optical CT (optical current transformer) using the Faraday effect for measuring high current in a super high voltage-power apparatus. It is performed as follows by the sensor for embodying Faraday effect. $\cdot$ A single-mode optical fiber capable of maintaining a polarization state is used. $\cdot$ A light source is applied at 1310[nm] to a Laser Diode. $\cdot$ The Linear of Faraday effect to a large current is evaluated and $\cdot$ A possible application using an Optical CT was shown. An Influence of Faraday effect to the surrounding temperature measured -40~50[$^{\circ}C$], and the characteristic of the current sensitivity was reported. An application using the results of the temperature compensation system was used in order to compensate for surrounding temperatures. A possibility of applying Optical CT for electric power apparatus was advanced further. We were able to confirm that this temperature calibration method can minimize the fluctuation of the output signal depending on the temperature conditions.