• Applied Biological Chemistry
• /
• 제29권4호
• /
• pp.366-371
• /
• 1986

광도(光度)가 다른 포장조건에서 자란 6년근 인삼잎과 온도별 20시간 처리된 관행재배 6년근 절제엽중(切除葉中)의 지방산을 gas chromatography로 분석하였다. 재배광도(온도)가 높을수록 지방산 함량이 감소하였다. Linoleic, linolenic, palmitic과 palmitoleic acid가 다량(多量)지방산으로 80%였다. 지방산 조성의 유사도는 광도 20%까지는 차이가 크지 않았으나 30%에서 차이를 보여 20%가 재배 한계 광도인 것 같다. 재배광도가 높을수록 불포화 지방산비율이나 불포화대(不飽和帶)의 비율이 적어져서 고온에 대한 적응 기작으로 보였다. 30% 수광율과 수확기잎이 지방산특성이 유사하였으며 고온적응과 노화(老化)의 관계가 불분명(不分明)하였다. 단시간(短時間)의 고온처리 ($25^{\circ}$ 및 $35^{\circ}C$)는 지방산함량, 불포화산비율 및 불포화도의 비율을 증대시켰고 지방산 조성이 유사하여 장기 온도효과와는 반대의 결과였다.

• 공업화학
• /
• 제33권1호
• /
• pp.17-27
• /
• 2022

형광 이미징은 시간 분해능과 공간 해상도가 높기 때문에 기초연구에서 세포나 소동물 이미징에 널리 활용된다. 기존의 형광 이미징은 가시광선 영역의 광원을 활용하기 때문에 조직 내 광투과도가 낮고, 광원에 의한 광독성이 생길 수 있으며, 자가형광에 의한 간섭으로 검출 민감도가 떨어지는 한계가 있다. 이러한 점을 개선하기 위해 에너지가 낮은 장파장의 광원을 활용하고자 하며, 700~900 nm 영역을 활용하는 근적외선-I 형광 이미징이 개발되었고, 이미징 성능을 대폭 향상시키기 위해서 1000~1700 nm 영역의 장파장을 이용하는 근적외선-II 이미징이 연구자들의 관심을 받고 있다. 근적외선-II 영역은 광산란이 최소화되어 생체조직 내 투과도를 약 10 mm까지 향상시킬 수 있고, 생체조직의 자가형광도 최소화되어 고민감도와 고해상도의 형광 이미징이 가능하다. 본 총설에서는 다양한 근적외선-II 형광 이미징 탐침 중에서 광안정성이 뛰어나고 발광 파장 조절이 용이한 무기 나노입자 기반 탐침에 대해 살펴보았고, 그 중에서 단층 탄소 나노튜브와 양자점 및 란탄족 나노입자에 대해 중점적으로 기술하였다.

• 에너지공학
• /
• 제2권2호
• /
• pp.231-236
• /
• 1993

The feasibility of Magnetohydrodynamic(MHD) Ship Propulsion using Superconduction Magnets is reviewed in light of relent advances in high-temperature superconducting. The propulsion using a screw propeller in the noise reduction has it's own limitation. The epochal noiseless MHD propulsion method which does not have this disadvantage is studying nowadays. The subject of a marine MHD as propulsion has been examined before and was found to be interesting because of relatively low magnetic flux densities. It is demonstrated that the MHD propulsion is technically interesting with high magnetic flux density. The development of large-scale magnets using the high-temperature superconductor now under development could make it practical to construct submersibles for high-speed and silent operation.

• 한국생산제조학회지
• /
• 제5권1호
• /
• pp.33-42
• /
• 1996

The high coherence of laser beam has made it possible to observe interference effects even in the light scattered from rough surfaces. That's why, when object with a scattering surface is illuminated with laser light, we do see a speckled appearance due to random interference. This sort of unique property of laser speckle has bruht into existence the new noncontaciting techniques such as speckle metrology method of measuring deformation, displacement, and vibration etc of objects with high optical sensitivity. The measurable range of speckle metrology especially used to measure in -plane information, however, is limited by some factors, the so-called strain, rotation tilt of surface and out of displacement perpendicular to the plane of analysis This restrictions severly limits the measurable range of speckle metrology by causing the decorrelation of speckle patterns. It is the purpose of this paper to give a survey on the measurable limitation of speckle photography method that is one of speckle metrology. Namely we will discuss the mutual relationships and problems of each limitations adding the restriction on the largest and smallest displacement measurable with speckle methods.

• KSBB Journal
• /
• 제25권1호
• /
• pp.67-72
• /
• 2010

In this study, we developed a comprehensive correlation for better prediction of the activated sludge concentration in the relationship between measurement of optical density by the Beer's law and sludge properties. Effects of activated sludge properties, which are sludge types and anaerobic storage time, show that absorbance deviation for sludge properties decreased on wavelength of light source near to 950 nm. We also developed a method to measure limitation with non-linear correlation on the measurement of high concentration by the Beer's law using a double layer probe cell and empirical equations.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.1-9
• /
• 2006

Purpose: The purpose of this study was to evaluate the efficacy and substitute possibility of a newly developed flowable composite resins as a luting cement for translucent fiber post. Material & Method: Two kinds of 12 mm translucent fiber Post (D.T. Light-Post (Bisco, USA) and FRC Postec (Ivoclar vivadent, Liechtenstein) was inserted into the teflon mold (7 mm diameter, 9 mm long) and Filtek-Flow (3M ESPE. USA), a light activated flowable composite resin, was polymerized for 60 seconds through the post. Also, the post was cut from the tip to 9 mm, 6 mm, 3 mm, and Filtek-Flow was light cured according to each length. For comparison, 60 seconds light-cured and 24 hours self-cured two dual cured resin cement (Duo-cement (Bisco, USA) and 2 Panavia-F (Kuraray, Japan)) samples were prepared as control group. Also cavities (1 mm in width, 1 mm in depth and 12 mm in length) were prepared using acrylic plate and aluminum bar, and flowable composite resin was flied and light cured by the diffused light from the fiber post's side wall. The degree of polymerization was measured according to the distance from curing light using Vickers' hardness test. Result: Within the limitation of this study, the following conclusions were drawn: 1. Vickers' hardness of light cured dual cured resin cement and flowable composite resin decreased from Panavia-F, Filtek-Flow and Duo-cement accordingly (p<0.05). In the dual curing resin cement, light curing performed group showed higher surface hardness value than self cured only group (p<0.05). 2. Surface hardness ratio (light cured through fiber post /directly light cured) of D.T. Light-Post using Filtek-Flow showed about 70% in the 6 mm deep and about 50% in the 12 mm deep FRC Postec showed only 40% of surface hardness ratio. 3. Surface hardness ratio by diffused light from the post's side wall showed about 50% at 6 mm and 9 mm deep, and about 40% at 12 mm deep in D.T. Light-Post. However, FRC Postec showed about 40% at 6 mm deep, and almost no polymerization in 9 mm and 12 mm deep.

• ALGAE
• /
• 제33권2호
• /
• pp.191-203
• /
• 2018

Fragilariopsis cylindrus is one of the most successful psychrophiles in the Southern Ocean. To investigate the molecular mechanism of biomineralization in this species, we attempted to synchronize F. cylindrus growth, since new cell wall formation is tightly coupled to the cell division process. Nutrient limitation analysis showed that F. cylindrus cultures rapidly stopped growing when deprived of silicate or light, while growth continued to a certain extent in the absence of nitrate. Flow cytometry analysis indicated that deprivation of either silicate or light could effectively arrest the cell cycle of this diatom species at the G1 phase, suggesting that synchrony can be established using either factor. Fluorescence labeling of new cell walls was faintly detectable as early as approximately 6 h after silicon repletion or light irradiation, and labeling was markedly intensified by 18 h. It is revealed that the synthesis of girdle bands begins before valve synthesis in this species, with active valve synthesis occurring during the G2 / M phase. Expression profiling revealed that selective member(s) of the F. cylindrus SIT genes (FcSIT) respond to silicate and light, with a different set of genes being responsive to each factor. The Si / light double depletion experiments demonstrated that expression of one FcSIT gene is possibly correlated to transition to G2 / M phase of the cell cycle, when the valve is actively formed.

• 융합정보논문지
• /
• 제10권2호
• /
• pp.32-38
• /
• 2020

본 논문에서는 가시광 통신시스템에서 고속 전송을 위한 변조 기법에 대해서 분석하고, 최적의 비직교 다중 전송을 위한 Dimming level 및 송신 전력 비율에 대해서 연구하였다. 기존의 가시광 통신은 전송 속도를 높이기 위한 멀티전송이 어렵다는 단점이 있다. 송신단에서 고속 전송을 위해서는 반드시 다중 전송기법이 필요한데, 일반적인 가시광 통신은 다중 전송에 한계가 있기 때문에 고속 전송을 위한 다양한 연구가 진행되고 있다. 최근에는 이미지 센서인 Optical Camera Communication(OCC)을 가시광 통신에 적용한 VLC-OCC가 연구되어 기존 가시광 통신이 가지는 다중 전송의 한계를 극복하였다. 그러나 VLC-OCC 방식은 외부 조도의 영향을 더 많이 받고, 수신단에서 검출이 어렵다는 단점이 있다. 또한, 다중 전송을 위한 LED 매트릭스의 위치 인식과 딥러닝을 위한 데이터 셋 신호처리를 위한 Processing-time이 필요하기 때문에 시스템의 복잡도가 증가하게 된다. 이러한 문제를 해결하기 위해 본 논문에서는 비직교 다중 전송 방식을 적용한 고속 가시광 통신을 위한 다중 변조 방식과 그에 따른 향후 연구 방향을 제안하였다.

• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.61-66
• /
• 2020

PURPOSE. The aim of the present study was to determine the degree of conversion of light- and dual-cured resin cements used in the cementation of all-ceramic restorations under different thicknesses of translucent (T) and high-translucent (HT) polymer-infiltrated ceramic-network (PICN) material. MATERIALS AND METHODS. T and HT PICN blocks were prepared at 0.5, 1.0, 1.5, and 2.0 mm thicknesses (n=80). Resin cement samples were prepared with a diameter of 6 mm and a thickness of 100 ㎛. Light-cured resin cement was polymerized for 30 seconds, and dual-cure resin cement was polymerized for 20 seconds (n=180). Fourier transform infrared spectroscopy (FTIR) was used for degree of conversion measurements. The obtained data were analyzed with ANOVA and Tukey HSD, and independent t-test. RESULTS. As a result of FTIR analysis, the degree of conversion of the light-cured resin cement prepared under 1.5- and 2.0-mm-thick T and HT ceramics was found to be lower than that of the control group. Regarding the degree of conversion of the dual-cured resin cement group, there was no significant difference from the control group. CONCLUSION. Within the limitation of present study, it can be concluded that using of dual cure resin cement can be suggested for cementation of PICN material, especially for thicknesses of 1.5 mm and above.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.341-347
• /
• 2020

Purpose: This study aimed to evaluate the effect of post-curing method on the flexural strength of provisional restorative resins produced by a digital light processing printer. Methods: A total of 20 specimens were produced, with a length of 64 mm, width of 10 mm, and thickness of 3.3 mm using a digital light processing printer. Two types of provisional restorative resins made with different post-curing methods were investigated and divided into conventional and vacuum groups. For the flexural strength test, each group was prepared by each method according to ISO 10477, and the flexural strength was measured with a universal testing machine. For statistical analysis, data were analyzed by independent t-test and Mann-Whitney U test. Results: The flexural strengths of the conventional and vacuum groups were 151.89 MPa and 131.94 MPa, respectively, showing a statistically significant difference (p<0.05). Conclusion: Within the limitation of this study, provisional restorative resins produced with vacuum demonstrated lower flexural strength than those produced with conventional postcuring method.