• Journal of Plant Biotechnology
• /
• 제30권3호
• /
• pp.245-249
• /
• 2003

This study was carried out to establish a regeneration system from leaf explant of purple sweetpotato(Ipomoea batatas L.) The optimal concentrations of plant growth regulators for callus induction and shoot formation were determined. The optimal combination for callus formation was 1$\mu$M 2,4-D 5$\mu$M BM, and highest yield of embryogenic calli were observed on Murashige and Skoog basal medium containing 0.5$\mu$M 2,4-D under light condition after 4weeks of culture. Embryogenec callus was subcultured on medium supplemented with 5$\mu$M ABA for 4 days. Subsequently, regeneration of adventitious shoots occurred when these embryogenic calli were transferred onto medium with 3∼6$\mu$M gibberellic acid. Regenerated shoots were developed into normal plantlets.

• Journal of Photoscience
• /
• 제12권3호
• /
• pp.175-183
• /
• 2005

Plants dissipate excess excitation energy from their photosynthetic apparatus by a process called non-photochemical quenching (NPQ). The major part of NPQ is energy dependent quenching (qE) which is dependent on the thylakoid pH and regulated by xanthophyll cycle carotenoids associated with photosystem (PS) II of higher plants. The acidification of the lumen leads to protonation and thus conformational change of light harvesting complex (LHC) proteins as well as PsbS protein of PSII, which results in the induction of qE. Although physiological importance of qE has been well established, the mechanistic understanding is rather insufficient. However, recent finding of crystal structure of LHCII trimer and identification of qE mutants in higher plants and algae enrich and sharpen our understanding of this process. This review summarizes our current knowledge on the qE mechanism. The nature of quenching sites and components involved in this process, and their contribution and interaction for the generation of qE appeared in the proposed models for the qE mechanism are discussed.

• 수면정신생리
• /
• 제13권1호
• /
• pp.5-10
• /
• 2006

Alcohol has extensive effects on sleep and daytime sleepiness. Alcohol has a sleep inducing effect and the effect of increased non-REM sleep and suppressed REM sleep during the first half portion of night sleep, but alcohol induces the effect of decreased non-REM sleep and increased light sleep and frequent awakenings and REM rebound during the second half portion of night sleep. Alcohol provokes chronobiological change such as the changes of amplitude or the phase shifts of hormones or core body temperature. The sleep disruption resulting from alcohol drinking may lead to daytime fatigue and sleepiness. The elderly are at particular in the increased risk of alcohol-related sleep disorders because they achieve higher levels of alcohol in the blood and brain than do younger adults after consuming an equivalent dose. Bedtime alcohol consumption among older adults may lead to unsteadiness if walking is attempted during the night, with increased risk of falls and injuries. Continued alcohol use for sleep induction often induces aggravation of insomnia, alcoholism or sleep related breathing disorders such as obstructive sleep apnea. Alcohol should not be used as substitution of sleep pill because of the dependence and tolerance for sleep inducing effect, and the sleep disruption produced by alcohol withdrawal.

• 미생물학회지
• /
• 제16권2호
• /
• pp.79-89
• /
• 1978

The RK-temperate phage which infected with Bacillus cereus was isolated and the characters were investigated. The induction of RK-temperate phage from host bacterium attained by ultraviolet light irradiation (15W, 30cm, 30-120sec) and mitomycin C treatment (0.2-2 ug/ml). The host range of RK-temperate phage was not revealed with lysogenic and related strains of B. cereus. But B. cereus(PS) 352 which obtained by N-nitrosoguanidine treatment(1,000.$\mu$g/ml) to phage infected with host bacteria was sensitive bacteria of RK-temperate phage. RK-temperate phage was stabilized at the condition of nutrient broth (pH 7-8), Tris-buffer (pH 7-8) and ammonium buffer (pH 8-9) and Sorensen's phosphate buffer (pH 6-7), but unstabilized at other salt solutions and pH range. Also, thermostability was to 45.deg.C but unstabilized at above 50.deg.C. At RK-temperate phage, the measurment values of head, neck, mid tail and end tail were 59nm, 9*16nm, 10*189nm, and 10*14nm respectively. The morphology of head was regular polyhedron, and the end tail was coneate form. On the one hand, the number of capsid protein layer of tail were consist of 4, 35, and 1 at neck, mid tail, and end tail, respectively. RK-temperate phage was identified with DNA phage and G+C contents were 38.63. The latent time of RK-temperate phage was 30 minutes and the burst size was 70-80. And the host bacteria was lysed in case of multi-infection, above moi 1.

• Toxicological Research
• /
• 제17권3호
• /
• pp.173-180
• /
• 2001

This study was conducted to investigate the antitoxic component in ethanol extract of Saururus chinesis (S. chinesis). The results were as follows: Generally, detoxication effects by s. chinesis extract increased in proportion to the extract concentration. non 8 $\mu\textrm{g}$/g dosage of S. chinesis extract was administered, it showed the highest antitoxic effects in metallothionein induction. After the extract treatment, body weights generally increased In proportion to the extract concentrations. from the above results, S. chinesis extract Increased Metallothionein concentration and decreased the toxicity of cadmium In rats. In vitro the antitoxic activity of ethanol extract of S. chinesis on NIH3T3 fibroblasts was evaluated by the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) and SRB (sulforhodamine B protein) assays. The light microscopic study was carried out to observe morphological changes of the treeated cells. $10^{-2}$mg/ml Concentrations of S. chinesis extract was shown significant antitoxic activity. The number of NIH 3T3 fibroblasts were increased and tend to regenerate. These result suggest that S. chinesis extract retains a potential antitoxic activity.

• Reproductive and Developmental Biology
• /
• 제28권4호
• /
• pp.257-260
• /
• 2004

Efficiency of somatic cell nuclear transfer was investigated in mice. First, oocyte activation was induced by SrCl₂, and the rate of development was compared with embryos from normal fertilization. Although more than one half of SrCl₂-treated oocytes developed to blastocysts (146/262, 55.7%), the rate of blastocyst formation was significantly lower than normal fertilization controls (59/79, 74.6%). Second, enucleation of oocytes was performed using Polscope that enables non-invasive visualization of metaphase spindles. Such approach could not only avoid damage of oocytes during an exposure to UV light often employed in conventional enucleation procedures, but could also assure the removal of nuclei from all oocytes operated because of monitoring the location of spindles during an entire process of enucleation. Morphologically normal blastocysts were obtained from the transfer of cumulus cell nuclei into enucleated oocytes. However, the rate of development into the blastocyst stage was still low (4/93, 4.3%). This reflects that the nuclear transfer procedure used in this study was not sufficiently optimized, and other factors may also impact greatly the efficiency of nuclear transfer. Including an induction of oocyte activation and method of enucleation tested in this study, a lot more elements are remained to be optimized to improve the efficiency of somatic cell nuclear transfer in mice.

• 한국주조공학회지
• /
• 제26권1호
• /
• pp.40-45
• /
• 2006

Most of the work reported concerned the semi-solid processing of low melting point alloys, and in particular light alloys of aluminum and magnesium. The purpose of this paper is to develop a semi-solid microstructure of Cu alloys using electromagnetic stirring applicable for squirrel cage rotor of induction motor. The size of primary solid particle and the degree of sphericity as a function of the variation in cooling rate, stirring speed, and holding time were observed. By applying electromagnetic stirring, primary solid particles became finer and rounder relative to as-cast sample. As the input frequency increased from 30 to 40 Hz, particle size decreased. The size of primary solid particle was found to be decreased with increasing cooling rate. Also, it decreased with stirring up to 3 minutes but increased above that point. The degree of sphericity became closer to be 1 with hold time. Semi-solid microstructure of Cu alloys, one of the high melting point alloys, could be controlled by electromagnetic stirring.

• Nuclear Engineering and Technology
• /
• 제42권3호
• /
• pp.297-304
• /
• 2010

In the design of advanced light water reactors (ALWRs) and in the safety assessment of currently operating nuclear power plants, it is necessary to evaluate the possibility of experiencing a degraded core accident and to develop innovative safety technologies in order to assure long-term debris cooling. The objective of this experimental study is to investigate the enhancement factors of dryout heat flux in debris beds by coolant injection from below. The experimental facility consists mainly of an induction heater, a double-wall quartz-tube test section containing a steel-particle bed and coolant injection and recovery condensing loop. A fairly uniform heating of the particle bed was achieved in the radial direction and the axial variation was within 20%. This paper reports the experimental data for 3.2 mm and 4.8 mm particle beds with a 300 mm bed height. The dryout heat density data were obtained for both the top-flooding and the forced coolant injection from below with an injection mass flux of up to $1.5\;kg/m^2s$. The dryout heat density increased as the rate of coolant injection increased. At a coolant injection mass flux of $1.0\;kg/m^2s$, the dryout heat density was ${\sim}6.5\;MW/m^3$ for the 4.8 mm particle bed and ${\sim}5.6\;MW/m^3$ for the 3.2 mm particle bed. The enhancement factors of the dryout heat density were 1.6-1.8.

• Corrosion Science and Technology
• /
• 제19권2호
• /
• pp.57-65
• /
• 2020

As competition among global automakers intensifies, demand for materials that are better in price and performance is increasing. While steel and plastic materials compete for automotive fuel tanks, plastic materials have advantages such as light weight for automobiles. However, they have high prices. Accordingly, in this paper, four types of Zn-X plated steel sheets, electroplating (X = none, Sn) and galvannealed (X = Fe, Fe-Mg), were manufactured and their applicability as a fuel tank material was evaluated. Nano-composite coating solution with good conductivity was treated on the surface of plated steels using a roll coater and then cured through induction furnace to improve corrosion resistance. Quality characteristics such as corrosion resistance, fuel resistance to diverse gasoline and diesel fuels, and seam weldability were evaluated for the above plated steels. Their properties were compared and analyzed with conventional Zn-Ni electroplating steels. Among the above plated steels, Zn-Fe-Mg galvannealed steels coated with nano-composite coating exhibited better properties than other steels. Detailed experimental results suggest that evenly distributed Mg elements on the coating layer play a key role in the enhanced quality performance.

• 대한디지털의료영상학회논문지
• /
• 제13권2호
• /
• pp.55-58
• /
• 2011

It is important to study using experimental animals for research about stroke. Magnetic Resonance Imaging(MRI) is avaluable diagnosticmethods for stroke diagnosis. The purpose of this research is to know the Magnetic Resonance Imaging(MRI) and histopathological characteristics findings after induction of photothrombotic cerebral infarction in rat brain. Male Sprague-Dawley rats were anesthetized, Rose Bengal dye(20 mg/kg) was intravenously injected. The right sensonrimotor cortex of rat brain was exposed to cold light of 7 mm diameter at a position of 1 mm anterior and 3.5 mm lateral to bregma for 20 min. The post-infarction effects were monitored by T1 weighted and T2 weighted images of brain MRI. Histopathological changes were observed after Hematoxylin & Eosin staining. The lesion appeared clearly high signal intensity area on T2 weighted images(the major axis $7.04{\pm}0.11$ mm, the minor axis $3.08{\pm}0.04$ mm) and also H&E staining was same result. In conclusion, MRI was avaluable diagnostic methods for diagnosis and serial changes of stroke.