• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.355-356
• /
• 2008

The light extraction efficiencies of GaN-based light-emitting diodes (LEDs) grown on differently patterned sapphire substrates were investigated by using the ray tracing method. It was found that angle of the pattern surface against the sapphire surface, the number of pattern per unit area were important structural factors for high extraction efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1404-1407
• /
• 2005

We have fabricated organic light-emitting diodes using poly(N-vinylcarbazole)(PVK) doped with N,N'- diphenyl-N,N'-bis(3-methylphenyl)-[l,l'-biphenyl]- 4,4/-diamine (TPD) as the hole transport layer. TPD molecules act as the trapping sites in PVK and reduce the hole mobility, which can enhance the electronhole balance in the emitting layer, resulting in the enhanced device performance. We have found the optimum ratio of TPD to PVK for the EL efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.156-156
• /
• 2010

We have developed highly efficient blue phosphorescent organic light-emitting devices (OLED) with simplified architectures using blue phosphorescent material. The basis device structure of the blue PHOLED was anode / emitting layer (EML) / electron transport layer (ETL) / cathode. The dopant was partially doped into the host layer for investigating recombination zone, current efficiency, and emission characteristics of the blue PHOLEDs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.37-40
• /
• 2000

This paper has been studied on characteristics of organic light-emitting device with various cathode materials. These catode materials were Al：Li(5%), Al, Cu, CsF/Al. And in these devices, HTL(hole transfer layer) was TPD and EML(emitting layer) was Alq$\sub$3/. We studied the I-V characteristics for each device. And then, the turn-on voltage of device for Al-Li(5%), Al, Cu, CsF/Al cathode were 7, 9, 13, 3V respectively. So, the CsF/Al cathode is superior to other cathode materials for I-V characteristics.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.97-100
• /
• 2005

Dynamic response of organic light-emitting diodes were analyzed in $ITO/Alq_3$(100 nm)/Al device structure with a variation of voltage an frequency. At low frequency region, complex impedance is mostly governed by resistive component, and at high frequency region by capacitive component. Also, we have evaluated resistance, capacitance and permittivity of devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.817-819
• /
• 2009

We have developed highly efficient blue phosphorescent organic light-emitting devices (PHOLEDs) with simplified architectures using new host materials. The Blue PHOLED with new host:FIrpic emitting layer exhibits a maximum luminance efficiency of 34 cd/A and a low operating voltage 5 V at a high luminance of 1212 cd/$m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.137-140
• /
• 2007

We prepared ambipolar organic field-effect transistors and observed blue emission when both hole and electron accumulation layers were in the channel. We found that the reduction of carrier traps and controlling devices' preparation and measurement conditions were crucial for ambipolar operation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권4호
• /
• pp.454-461
• /
• 2015

Light enhancement of GaN based light emitting diodes (LEDs) have been investigated by texturing the top p-GaN surface. Nano-textured LEDs have been fabricated using self-assembled Ni nano mask during dry etching process. Experimental results were further compared with simulation data. Three types of LEDs were fabricated: Conventional (planar LED), Surface nano-porous (porous LED) and Surface nano-cluster (cluster LED). Compared to planar LED there were about 100% and 54% enhancement of light output power for porous and cluster LED respectively at an injection current of 20 mA. Moreover, simulation result showed consistency with experimental result. The increased probability of light scattering at the nano-textured GaN-air interface is the major reason for increasing the light extraction efficiency.

• 대한환경공학회지
• /
• 제34권9호
• /
• pp.630-636
• /
• 2012

본 연구는 해양미세조류 Dunaliella salina을 LED 광원을 이용하여 배양한 연구로 배양에 필요한 최적의 파장, 광도, 공기공급속도 및 배양온도를 찾기 위하여 수행되었다. 낮은 배양온도에서보다는 높은 온도에서 성장이 빨랐으나, 본 실험에서는 $22^{\circ}C$에서 가장 잘 성장하는 것으로 확인되었다. LED 파장에 따른 성장실험에서는 백색 LED가 배양에 가장 효과적이었으며, 광도에 따른 실험에서는 실험 시 고려한 3가지 광도 중(3,000, 6,300, 8,000 Lux) 3,000 Lux에서 최대 세포농도인 1.30 g/L를 나타내었다. 공기공급속도의 증가는 Dunaliella salina의 성장속도와 반비례의 관계를 나타내었는데, 공기를 공급하지 않은 경우의 비증식속도 $1.12day^{-1}$와 비교하면 공기공급은 본 미세조류의 성장에 저해요인으로 작용함을 알 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2008년도 추계학술발표대회 및 제15회 신소재 심포지엄
• /
• pp.20.2-20.2
• /
• 2008