• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.309-314
• /
• 2015

In this study, an embedded ranging system based on a laser structured light image is developed. The distance measurement by the structured light image processing has efficient computation because the burdensome correspondence problem is avoidable. In order to achieve robustness against environmental illumination noise and real-time laser structured light image processing, a bandpass optical filter is adopted in this study. The proposed ranging system has an embedded image processor performing the whole image processing and distance measurement, and so reduces the computational burden in the main control system. A system calibration algorithm is presented to compensate for the lens distortion.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.251-257
• /
• 2003

In this paper, we wish to construct a optimal traffic cycle using wire remote control. if police vehicle or ambulance suddenly enter the traffic Intersection, it will increase the traffic accident. In this paper, wireless traffic light use the radio traffic control signal and research about the hardware manufacture to check special detectors on urgency vehicles may safety and rapidly enter traffic intersection. Also, this paper present a traffic signal control conditions that analyzes different traffic intersection flows in cases of saturated flows, where the real traffic volume demand is large and the capacity constraints of bottlenecks have significant effects on the flow patterns. Through computer simulation this wireless traffic light has been proven to be much more safety and efficient than fixed traffic signal light which does not consider emergency vehicles for safety escort.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.365-370
• /
• 2004

In this paper, we wish to construct a optimal traffic cycle using wire remote control. if police vehicle or ambulance suddenly enter the traffic intersection, it will increase the traffic accident. In this paper, wireless traffic light use the radio traffic control signal and research about the hardware manufacture to check special detectors on urgency vehicles may safety and rapidly enter traffic intersection. Also, this paper present a traffic signal control conditions that analyzes different traffic intersection flows in cases of saturated flows, where the real traffic volume demand is large and the capacity constraints of bottlenecks have significant effects on the flow patterns. Through computer simulation this wireless traffic light has been proven to be much more safety and efficient than fixed traffic signal light which does not considering emergency vehicles for safety escort.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.261-263
• /
• 2004

This paper studies the lighting pattern control of a high-brightness LED warning light. The driving circuit for the warning light is composed of a full-wave rectified circuit and of a control circuit using a micro-controller (AT89c2051). The micro-controller is programmed in a suitable manner to accomodate a number of variable lighting patterns and to adjust the blinking speed. To reduce the total number of LEDs installed a special consideration is made to the bundled pattern in a lamp module which is lit simultaneously. The resultant LED warning light has merits not only over the conventional incandescent warning light on the energy saving aspect but also over some other LED-type ones in the market.

• Current Optics and Photonics
• /
• v.7 no.1
• /
• pp.83-89
• /
• 2023

This study reports a structure, based on a liquid-crystal (LC) core optical waveguide, for the switchable spatial control of linearly polarized light. The refractive indices of both left and right isotropic claddings in the waveguide are between the two principal-axis indices of the nematic liquid crystal (NLC). Numerical simulations demonstrate that the proposed structure can be operated in transmission mode or as an attenuator by controlling the on and off states of the applied voltage, whether the initial excitation is transverse electric (TE) linearly polarized light or transverse magnetic (TM) linearly polarized light. The design can also be used as an integrated optical polarizer, since only one type of linearly polarized light is always permitted to pass through the core zone of the NLC optical waveguide.

• Design & Manufacturing
• /
• v.16 no.2
• /
• pp.20-25
• /
• 2022

In line with the rapid economic growth of many countries, fossil fuel energy sources are also rapidly depleting. Therefore, the price is also rising rapidly, so it is necessary to develop new and renewable energy sources such as hydropower, geothermal power, nuclear power, wind power and solar energy to replace fossil fuel energy in the future. In this study, development of rotating concentrator module system, development of rotating module control control system, development of lamp and charge control controller, configuration and prototype production of rotating concentrating solar LED street light system, efficiency of rotating concentrating solar LED street light, and power production. The research was conducted in the order of evaluation of comprehensive performance tests such as consumption and consumption. As a result, the developed high-efficiency rotation-concentrating hybrid solar LED street light module system has a 50% higher light-gathering efficiency than existing products by tracing sunlight by self-developing a rotation-collecting module on existing solar LED street lamps according to the characteristics of Korea's topography. and the power generation was improved by more than 40%.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.149-152
• /
• 2000

This paper is on the edgelit device with external control function and change of light color by dimming control of high flux LED. It the light is projected the transparent body via reflector, the mixture of light is uniform and it is proved by simulation and experimentation. To improve the light efficiency of the device, the research on reflector materials and the distortion of LED input owing to the transistor's characteristics are need.

• Korean journal of food and cookery science
• /
• v.29 no.6
• /
• pp.717-724
• /
• 2013

Physicochemical properties of safflower sprouts grown in there different lights red, blue, and white; control exposed to limited light and subjested to different drying processes were investigated. Moisture contents of safflower sprouts grown different lights and treated with hot dry air were as follows: 9.38%(white light), 5.70%(blue light), 12.21%(red light), and 7.84%(control; no light). The moisture contents of freeze-dried safflower sprouts were as follow as: 9.95%(white light), 11.30%(blue light), 11.25%(red light), and 10.45%(control). Crude ash contents of the hot air-dried sprouts were as follows: 4.82%(white light), 12.22%(blue light), 4.33%(red light), and 6.30%(control). The crude ash contents of freeze-dried safflower sprouts were as follow as: 4.75%(white light), 4.44%(blue light), 4.00%(red light), and 3.65% (control). Crude protein contents of hot air-dried safflower sprouts were as follows: 16.52%(white light) 15.40%(blue light), 14.55%(red light), and 15.46%(control). The crude ash contents of freeze-dried safflower sprouts were as follows: 25.19%(white light), 15.72%(blue light), 25.53%(red light), and 20.13%(control). Chlorophyll contents of hot air-dried and freeze-dried safflower sprouts were higher than those of only freeze-dried sprouts. b-values of freeze-dried sprouts were lower than those of sprouts dried by other dried methods. The contents of minerals Ca, Mg, Na, P and K in all the sprout samples remains unchanged regardless of the drying methods.

• Journal of Sensor Science and Technology
• /
• v.30 no.4
• /
• pp.196-203
• /
• 2021

In this study, an optical identification system was developed, wherein visible light is used to transmit the interrogating signal, and infrared is used to send the response signal. In the reader, visible light from a light emitting diode (LED) array was modulated via modified pulse width modulation for flicker-free illumination and dimming control. Moreover, the duty factor of the dimming control time was employed to control the illumination from the LED. In the transponder, the spike signal in the output of the high-pass filter was utilized to recover the interrogating signal while preventing interference from the 120-Hz noise from adjacent lighting lamps. The illumination was controlled in 26-86% range of the constant wave LED illumination by changing the duty factor from 20% to 90%. This configuration is advantageous for the construction of optical identification systems for automatic security check and car fare calculation at toll gates or parking facilities.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.235-237
• /
• 2010

When curing the composite restorations with light curing units, the light guides are often in direct contact with oral tissues, therefore contamination of light guides is inevitable. Curing light guides fall into the "semicritical" instrument category according to the Centers for Disease Control and Prevention (CDC) and must be heat or vapor-sterilized or at a minimum, these semicritical instruments must be sterilized in a liquid chemical agent. Currently, most common methods of maintaining sterility of the light guides are wiping the guide with a disinfectant, such as glutaraldehyde, after each patient use; using autoclavable guides; using presterilized, single-use plastic guides; and using translucent disposable barriers to cover the guide.