• 제목/요약/키워드: life satisfaction scale

검색결과 483건 처리시간 0.024초

지체장애근로자의 직업성공 요인에 관한 연구 (A study on the factors to affect the career success among workers with disabilities)

  • 이달엽
    • 한국사회복지학회:학술대회논문집
    • /
    • 한국사회복지학회 2003년도 추계학술대회 자료집
    • /
    • pp.185-216
    • /
    • 2003
  • 본 연구에서 지체장애근로자들의 직업성공을 구성하는 요인들을 분석하고 이들 요인이 직업성공과 이직에 영향을 미치는 정도를 조사하여 가설적 이론모형을 검증하려는 목적을 두었다. 이를 위해서 지체장애를 가진 근로자 374명과 일반근로자 453명을 대상으로 구조화된 설문지를 통해 나타난 주요 연구결과들은 다음과 같이 요약되었다. 첫째, 장애근로자와 일반근로자의 직업성공을 구성하는 요인은 개인, 가정, 조직의 측면에서 나타났다. 개인적인 측면은 자아존중감과 자아효능감으로 구성되었고, 가족적인 측면은 다중역할스트레스와 자녀의 수로 구성되었다. 조직적인 측면은 자원활용능력, 네트워킹, 그리고 조언자로 구성되었다 이 밖에도 주관적인 직업성공과 객관적인 직업성공이라는 잠재변수에서 종 10개의 측정변수가 도출되었다. 둘째, 장애근로자와 일반근로자 집단 모두 직종이 직업성공에 영향을 미치는 것으로 조사되었다. 관측변수에서는 두 집단에서 직업성공에 영향을 주는 변수가 서로 다르게 나왔다. 장애근로자집단은 이직을 했을 때 평균적으로 근속한 년수와 임금을 제외하고 나머지 모든 관측변수에서 영향을 미치는 것으로 나타났으며, 일반집단은 조언자와 근속년수를 제외하고 나머지 모든 관측변수에서 영향을 미치는 것으로 조사되었다. 셋째, 장애근로자와 일반근로자 집단 모두 연령과 이직 경험이 이직 (이직횟수)에 영향을 미치는 것으로 나타났다. 그러나 장애집단은 친구의 수, 일반집단은 직업선택 시 중요하게 고려하는 사망이 각각 이직에 강한 영향을 미치는 것으로 조사되어 두 집단의 자이를 보여주었다. 또한 관측변수에서도 장애집단은 배우자의 직업과 근속년수, 일반집단은 다중역할 스트레스와 이직평균 근무년수에서 각기 다르게 이직에 영향을 미치는 것으로 나타났다. 넷째, 가설적 경로모형을 검증한 결과 제 1모형은 어느 정도 타당하고 직업성공을 예측할 수 있는 것으로 나타났으며, 제 2모형은 카이스퀘어와 자유도 ($x^2=64950$, df=61, P=0341), 기초부합치 (AGFI)는 .954, 비적합지수 (CFI)는 997, 그리고 원소간의 평균차이 (RMR)도 .038로써 모형의 적합도 지수는 모두 허용된 범위 안에 있기 때문에 매우 적합한 모형으로 직업 성공을 보다 높게 예측할 수 있는 것으로 조사되었다. 이상의 연구결과를 바탕으로 본 연구에서는 다음과 같이 결론을 도출하였다. 첫째, 직종이 두 집단 모두에서 직업성공을 예측하는데 주요한 변수로 나타나 장애근로자들의 학력을 높이고 계속해서 전문화 육에 많은 노력이 필요할 것이다. 특히, 임금정도와 같은 객관적인 직업성공 보다는 임금과 진급에서의 만족과 같은 주관적인 직업성공에 더욱 더 많은 고려를 기울여야 할 것으로 사료된다. 둘째, 장애근로자의 이직을 줄이기 위해서는 직장 내에서 유용한 인적 자원과 네트웍의 수를 늘여야 할 것이다. 이것은 장애집단이 일반집단보다 대인관계에 대해서 더 많은 시간과 노력을 기울여야 한다는 것을 의미한다.

  • PDF

원예전문생산단지 운영에 대한 중요도-만족도 분석 (Importance-Performance Analysis of Operation of Specialized Complexes for Horticultural Production)

  • 홍나경;리재웅;김태균
    • Current Research on Agriculture and Life Sciences
    • /
    • 제33권1호
    • /
    • pp.25-31
    • /
    • 2015
  • 본 연구는 시설원예 작물 재배 농가들을 대상으로 응답자들의 항목별 선호도를 분석하고, 농업현장에서 농민들이 체감하는 원예단지에 대한 만족도와 문제점을 파악하고 평가하고자 하였다. 분석 대상은 크게 생산관련 소모품 공동구입, 온실시설 기자재 공동구입, 공동 육묘 생산, 공동 냉난방시설 사용, 공동출하, 토양 검사 및 인증제도를 포함하는 공동 활동부분과 생산기술정보, 온실시설관리정보, 유통관련정보, 생산기술교육, 온실시설관리교육, 유통관련교육을 포함하는 정보교류 및 교육부분으로 나누었다. 공동활동 부분의 IPA분석결과 소모품 공동구입, 기자재 공동구입, 공동출하 항목이 중요도와 만족도가 모두 높아 지속적인 유지가 필요하며, 공동육묘 생산, 공동냉난방 시설 등 2개 항목은 중요도와 만족도가 모두 낮아 우선순위를 낮추어도 될 것으로 판단된다. 소모품 및 기자재 공동구입에 대한 단지별 생산자 니즈를 파악하고, 원예전문생산단지가 수출집중형인 경우에는 공동출하 체계를 적극 활용해 수출대상국별 경쟁력 있는 교섭권을 더욱 강화해 나가야 할 것이다. 한편, 육묘장과 냉난방시설의 경우, 정부지원을 받아 시설을 소유하고 있는 비율이 높기 때문에 중요도-만족도가 낮은 것으로 판단된다. 그러나 $CO_2$ 저감을 위한 환경친화적 신재생 에너지의 활용 및 지속가능한 농업의 관점에서 고찰해보면, 에너지 이용 효율성 제고 및 환경 친화적 원예단지 조성이 중요한 부분이라는 것을 인지해야 할 것이다. 또한, 토양 검증 및 인증 항목은 중요도에 비해 만족도가 높아 과잉관리가 개선될 필요성이 있는 것으로 나타났다. 이러한 결과는 원예전문생산단지 평가 지표에서 가점을 주는 평가항목들이기 때문에 이미 잘 관리가 되고 있는 것으로 설명할 수 있다. 정보교류 및 교육부문의 IPA분석결과 가장 집중적으로 관리되어야 할 요인으로 생산기술 교육이었으며, 원예전문단지 교육을 실시하기 위해서는 생산기술 교육을 타 교육(온실관리 및 유통관련 교육) 보다 집중적으로 실시해야할 부분으로 평가할 수 있다. 생산기술 정보, 온실시설 관리정보, 유통관련 정보는 중요도와 만족도가 모두 높아 지속적으로 잘 유지해야 할 필요가 있는 요인들이다. 다양한 정보에 대한 응답자들의 중요도와 만족도가 높기 때문에, 농가들의 적극적인 정보 교류를 활성화 시키는 방안을 제시할 수 있을 것이다. 예를 들면, 구성원들의 정보교류 어플리케이션, SNS 활동 혹은 홈페이지 활용, 공식적인 정기모임 및 정보교류 회의를 위한 협의체를 구성 등을 들 수 있겠다. 온실관리 교육, 유통관련 교육의 2개 요인에 대해서는 우선순위를 낮추어도 좋은 것으로 판단된다. 마지막으로 생산성 향상 및 시설원예의 경쟁력 강화를 위해 정부 주도의 시설원예단지 규모는 더욱 확대될 것이므로, 본 연구의 결과가 원예전문생산단지의 운영에 효율적으로 적용되기를 기대한다.

치과기공사의 업무스트레스에 대한 연구 (A Study on Job Stress of Dental Technician)

  • 이덕수;곽동주;남상용
    • 대한치과기공학회지
    • /
    • 제24권1호
    • /
    • pp.51-63
    • /
    • 2002
  • The purpose of this study was to be of use for getting rid of job stress from dental technicians, by examining how much they were stressed out at work place as one of the professional medical personnels. The subjects in this study were 255 selected dental technicians who were working in the region of Taegu. The one-on-one interview was conducted from March 1 to 30, 2001, with structured questionnaire. The questionnaire sued in this study included 19 question items about the general characteristics and 29 items regarding job stress. The job stress was categorized into seven subareas based on earlier studies and considering the job situations of dental technicians: heavy workload, job conflicts, improper treatment, role and job knowledge, human relations, physical environment and personal matters. The job stress extent was measured on five-point Likert scale that is widely used in social science: one point for no stress, two for little stress, three for so-so, four for a little stress, and five for severe stress. Therefore, a higher point means a severer job stress. The reliability of the questionnaire turned out very good with Cronbach a = 0.9272. The findings of this study were as follows: 1. The general characteristics of the dental technicians investigated could be described as below: (1) By gender, 80.4% of the dental technicians were male, and 50.2%, the largest percentage, were in their 20s, followed by those in their 30s, those in their 40s, and those in their 50s in the order named. (2) The most common work place was dental technician shop(92.5%), followed by dental technology room in dental hospital or clinic and in general hospital in the order named. The primary duties were coating materials work(30.6%), followed by sculpture, grinding, partial and full denture and orthodontics in the order named. 2. The most larges (1) The most largest motivation to be a dental technician was its being a professional(33.7%), followed by the advice from others, their own aptitude, and good economic treatment in the order named. 3. Their job stress could be explained as below: (1) Their collective job stress average was 3.96$^{\circ}{\ae}$0.50 on the basis of 5 point, which showed that they were exposed to a fairly severe job stress. (2) By area, they were most stressed out from heavy workload (4.12), and they also were severely stressed from role and job knowledge(4.02) and personal matters(4.00). (3) By situation, they were most stressed when the disagreement of prosthesis that results from a specific error is unconditionally attributed to them(4.43). And they were also stressed a lot when their workload increases due to the rework(4.38), when a dentist asks something difficult for them to resolve(4.20), when heavy workload makes their working hours irregular and it's impossible to lead a personal life or have leisure time(4.16), and when they are o work for an excessively short time(4.16). This fact indicated that most of the dental technicians were exposed to a lot of stress in conjunction with job performance. 4. The main duties they took charge of didn't make any significant difference to their job stress, but yielded a significant difference to the extent of job stress in individual areas and the order of the most stressful one. Those who were engaged in grinding were most stressed from their own matters, whereas heavy workload was most stressful for those who were engaged in the other types of works. 5. As a result of seeing if their personal characteristics yielded any differences to job stress, the personal characteristics that made their job stress vary significantly were working hours, motivation of being a dental technician, job satisfaction and willingness to continue doing dental technology works. There was a tendency that longer working hours led to severer job stress, and those who chose to be a dental technician according to their own aptitude were less stressed than the others who became a dental technician because of economic reason or advices from others. And the people who were satisfied with their job were exposed to less job stress than the others who weren't, and those who had an intention to keep that job as much as possible were less stressed, compared to the others who hadn't.

  • PDF