• 문화기술의 융합
• /
• 제2권1호
• /
• pp.71-78
• /
• 2016

본 연구의 목적은 '성공이 아니라 섬김이야(not success, but service)'로 대변될 수 있는 서서평선교사의 선교에 대한 올바른 이해와 관심을 촉구하고 특히 일제강점기동안 일생을 간호선교사로 살았던 그의 희생적 삶의 발자취를 고찰하기 위함이다. 내용구성은 첫째로 서서평선교사의 삶에 대한 개요를, 둘째로 서서평간호선교사에 대한 이해와 간호선교를 고찰하고, 셋째로 사랑과 섬김을 바탕으로 한 인간의 생명존중을 최고의 가치로 두는 간호교육의 나아갈 방향을 제시하고자 한다.

• Corrosion Science and Technology
• /
• 제11권1호
• /
• pp.29-36
• /
• 2012

The resistance spot welding of high strength steel degrades the weldability because of its high strength with rich chemical composition and coating layer to protect from corrosion. During the each resistance welding process the electrodes tip reacts with coating layer, then subsequently deteriorates and shorten electrode life. In this study, the Al-coated HPF (Hot Press Forming) steels and Zn-coated TRIP steels were used to investigate the electrode life for resistance spot welding. Experimental results show that the reactivity of Al-coating on HPF steels to electrode tip surface behaviors different from the conventional Zn-coated high strength steels. The electrode tip diameter and nugget size in electrode life test of Al-coated HPF steels are observed to be constant with respect to weld numbers. For Al-coated HPF steels, the hard aluminum oxide layer being formed during high temperature heat treatment process reduces reactivity with copper electrode during the resistance welding process. Eventually, the electrode life in resistance spot welding of Al-coated HPF steels has the advantage over the galvanized steel sheets.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.168-176
• /
• 2014

The enterprise life cycle derived from the product life cycle consists of introduction, growth, maturity and decline. The enterprise tries to reach the growth stage early and stay at the maturity stage stably through expanding its businesses and investing for the new technology. The public enterprise is not different but its life cycle is more prone to be affected by the national development and policy. A typical example can be found in the case of the quasi market SOC public enterprise which spends massive amount of fund to provide social infrastructure. After the fulfillment of its mandated mission it is exposed to the pressure of a merger or a closure usually because large portion of the debt is directly linked to the national financial stability and credit ratings. This research is focused on the variables that influence the life cycle of the quasi market SOC public Enterprise for its future competitiveness is in connection with its normalization, advancement and rationalization. In this respect, categorical variables system centering on public characteristics and profitability drew eight categorical variables such as policy outcomes, public benefit, finance and business values etc.

• 한국군사과학기술학회지
• /
• 제21권1호
• /
• pp.124-132
• /
• 2018

This paper presents a shelf life assessment for K-1 military gas masks in the Republic of Korea using test data of Chemical Materiels Stockpile Reliability Program(CSRP). For the shelf life assessment, over 2,500 samples between 2006 and 2015 were collected from field tests and analyzed to estimate a probability of proper and improper functionality using Bayesian estimation. For this, three stages were considered; a pre-processing, a processing and an assessment. In the pre-processing, major components which directly influence the shelf life of the mask were statistically analyzed and selected by applying principal component analysis from all test components. In the processing, with the major components chosen in the previous stage, both proper and improper probability of gas masks were computed by applying Bayesian estimation. In the assessment, the probability model of the mask shelf life was analyzed with respect to storage periods between 0 and 29 years resulting in between 66.1 % and 100 % performances in accuracy, sensitivity, positive predictive value, and negative predictive value.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.32-36
• /
• 2013

The large-scale structures have the possibility that there are defects such as cracks due to stress concentration caused by geometric discontinuities in the structure. In this respect, the assessment of fatigue life and the development of structural health monitoring(SHM) are very important. Fatigue design of structure is typically accomplished either using a set of stress cycle (S-N) data obtained from fatigue tests or using the fracture mechanics approach. The stress intensity factor(SIF) is required for the estimation of fatigue crack propagation life from the linear elastic fracture mechanics (LEFM) perspective. In this study, Macro Fiber Composie(MFC) sensor for the measurement of SIF of two dimensional cracks is used. The SIF based on the piezoelectric constitutive law and fracture mechanics are calculated. The measured values of the SIF are later used for the prediction of the crack propagation life. In this study, the measured value of the SIF and the fatigue life are compared with the theoretical results.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.70-77
• /
• 1996

Fatigue tests were carried out at high temperature on a Cr-Mo-V steel in order to assess the fatigue life of components used in power plants. The characteristics of high temperature fatigue were divided in terms of cycle-dependent fatigue and time-dependent fatigue, each crack propagation rate was examined with respect to fatigue J-integral range, .DELTA. J$_{f}$and creep J-integral range, .DELTA. J$_{c}$. The fatigue life was evaluated by analysis of J-integral value at the crack tip with a dimensional finite element method. The results obtained from the present study are summarized as follows : The propagation characteristics of high temperature fatigue cracks are determined by .DELTA. J$_{f}$for the PP(tensile plasticity-compressive plasticity deformation) and PC(tensile plasticity - compressive creep deformation) stress waveform types, and by .DELTA. J$_{c}$for the CP(tensile creep- compressive plasticity deformation) stress waveform type. The crack propagation law of high temperature fatigue is obtained by analysis of J-integral value at the crack tip using the finite element method and applied to examine crack propagation behavior. The fatigue life is evaluated using the results of analysis by the finite element method. The predicted life and the actual life are close, within a factor of 2.f 2.f 2.

• 대순사상논총
• /
• 제19권
• /
• pp.213-250
• /
• 2005

Until 1970's, mankind have not had definite perspectives on what life after the death was like, which is one of the most important problems for them. Their concepts of the 'life and death problem' has been distorted by the dogmas of the established religions such as Buddhism or Christianity on heaven and hell. But the mankind came to have wholly different views on the life after death thanks to the studies by Raymond Moody Jr. or Elizabeth Quebler-Ross in the mid-1970's. This is the studies on the so-called 'near-death experience(NDE)' which made humankind be able to have scientific approach to the life after death for the first time in their history. What attracts our attention at this point is, however, that the arguements of the NDErs on humman destiny accurately coincide with those of the established religions. In the NDE, most of the experiencers have an encounter with the personal being, symbolized by the Light, through whom they learnt that the devotion(or love) to the neighborhood and the gain of the wisdom are the sole meaning of life. With this result, we can recognize why essential virtues maintained by the established religions until now such as ultimate compassion, unconditional love, forgiveness, or insightful learning are so significant, and that our studies of the NDE are very important in this respect.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.225-226
• /
• 2002

In this work, the friction and wear behavior under' various lubrication regimes were investigated. The objective of this work is to develop an Accelerated Life Test (ALT) method for the durability evaluation of a machine element which is operated under lubrication. Electric contact resistance and frictional forces were measured with respect to a wide range of the loads and speeds under various lubrication regimes using a pin-on-disk type tribotester. From the experimental results, it could be found that an effective and reliable ALT method could be achieved by controlling the lubrication regime through the measurements of friction coefficient and contact resistance with respect to load and sliding speed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.496-506
• /
• 2014

In this paper the scenario based optimization of the bulbous bow of the KRISO Container Ship (KCS) is presented. The optimization of the parametrically modeled vessel is based on a statistically developed operational profile generated from noon-to-noon reports of a comparable 3600 TEU container vessel and specific development functions representing the growth of global economy during the vessels service time. In order to consider uncertainties, statistical fluctuations are added. An analysis of these data lead to a number of most probable upcoming operating conditions (OC) the vessel will stay in the future. According to their respective likeliness an objective function for the evaluation of the optimal design variant of the vessel is derived and implemented within the parametrical optimization workbench FRIENDSHIP Framework. In the following this evaluation is done with respect to vessel's calculated effective power based on the usage of potential flow code. The evaluation shows, that the usage of scenarios within the optimization process has a strong influence on the hull form.

• 가정과삶의질연구
• /
• 제11권1호
• /
• pp.149-158
• /
• 1993

This thesis focus of the analysis of the family relationship in Yulgok's thoughts. He thought that to control the family well may have on influence upon the things done outside home and the put its ultimate purpose on the family concord. To keep the harmony family the record relation between the family which has to be based on respect and sincerity must be presumed, In terms that the marital relationship is the most important point of all human ethics he advised the mutual sincerity in choosing a spouse,. Parenthood must be established on the basis of filial duty and charity and brothers and sisters must respect each other with fraternity and politieness. These thoughts which must be inherited today can be the best ways to keep a desirable family relationship.