• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.722-732
• /
• 2016

A new optical one-time password (OTP) authentication method using digital holography is proposed, which enhances security strength in the authentication system. A challenge-response optical OTP algorithm based on two-factor authentication is presented using two-step phase-shifting digital holography, and two-way authentication is also performed using challenge-response handshake in both directions. Identification (ID), password (PW), and OTP are encrypted with a shared key by applying phase-shifting digital holography, and these encrypted pieces of information are verified by each party by means of the shared key. The encrypted digital holograms are obtained by Fourier-transform holography and are recorded on a CCD with 256 quantized gray-level intensities. Because the intensity pattern of such an encrypted digital hologram is distributed randomly, it guards against a replay attack and results in higher security level. The proposed method has advantages, in that it does not require a time-synchronized OTP, and can be applied to various authentication applications. Computer experiments show that the proposed method is feasible for high-security OTP authentication.

• 한국광학회지
• /
• 제17권5호
• /
• pp.401-411
• /
• 2006

보안 시스템에서 2-단계 위상 천이 홀로그래피를 이용하여 이진 정보 광 암호화 기법을 제안하였다. 위상 천이 디지털 간섭계는 CCD 카메라를 이용하여 위상과 크기 정보를 기록할 수 있는 기법이다. 2-단계 위상 천이는 0과 ${\pi}/2$의 위상 천이 각을 갖도록 PZT 거울을 움직여서 구현하였다. 이진 정보와 암호키는 랜덤 코드와 랜덤 위상으로 표현하였고, 디지털 홀로그램은 푸리에변환 홀로그램으로 간섭무늬는 CCD를 이용하여 256 레벨의 양자화 된 광세기로 획득되었다. 데이터 복원 시 DC 성분 제거 방법을 사용하였다. 컴퓨터 모의실험을 통하여 데이터 복원과 양자화 과정에서의 양자화 레벨 변화량과 디지털 홀로그램 간섭무늬의 오차 픽셀수에 따른 오차 분석을 수행하였다. 이 결과를 이용하여 정보의 광학적 암호화에 적용이 가능함을 확인하였다.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.86-93
• /
• 2006

This study is concerned with the investigation of characteristics of an AMT (Automated Manual Transmission) which are composed of clutch part and transmission part. When a shilling signal is received from the controller, the clutch is disengaged first, and shifting action including selecting action is followed, and then the clutch is engaged last. The characteristics of transmission shifting response are affected by various parameters of clutch and transmission control elements. Analytical results are in fair agreement with experimental results. It is found that the operating pressure level is the most important for the response of AMT characteristics, and that the other parameters such as natural frequency and damping ratio of the control valve are less important.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권6호
• /
• pp.2817-2834
• /
• 2016

The existing reversible data hiding methods for block truncation coding (BTC) compressed images often utilize difference expansion or histogram shifting technique for data embedment. Although these methods effectively embed data into the compressed codes, the embedding operations may swap the numerical order of the higher and lower quantization levels. Since the numerical order of these two quantization levels can be exploited to carry additional data without destroying the quality of decoded image, the existing methods cannot take the advantages of this property to embed data more efficiently. In this paper, we embed data by shifting the higher and lower quantization levels in opposite direction. Because the embedment does not change numerical order of quantization levels, we exploit this property to carry additional data without further reducing the image quality. The proposed method performs no-distortion embedding if the payload is small, and performs reversible data embedding for large payload. The experimental results show that the proposed method offers better embedding performance over prior works in terms of payload and image quality.

• 대한안전경영과학회지
• /
• 제20권4호
• /
• pp.1-6
• /
• 2018

Recently, bicycle has means of effective healthy transportation, and riding the bicycles is considered as popular recreational and sporting activities. Also, the saddle, steering system, driving device and braking device are researched briskly because of consumer's need for driving performance and comfort. Especially, the importance of a cassette responsible for transmission function by transmitting power to the drive shaft through the chain is very focused. The writer conducted structural analysis for the sprocket of each level using the ANSYS widely used for the analysis. Speed shifting performance was enhanced by minimization / simplification of shifting point through a sort of tooth profile of the cassette. By partitioning a clear value type and other shifting point, it has been modified to enable smooth speed-shifting. In addition, as titanium precision forming process, this study studied the molding technique by blanking and dies forging for mass production of the cassette. so it could be expected that the entire drive train would utilize that in the future. The stamping process capability for thin materials for the mass production of the sprockets is applicable to producing automobile parts, so lightweight component production is likely to be possible through that, for the safety of driving.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1534-1541
• /
• 2003

A new window-based, user-friendly fringe analysis system is developed, especially for analyzing noisy interferograms. The system integrates three major techniques, that is fringe tracking, Phase shifting, and Fourier transform, into a single shell by employing a unified procedure. Since the system is made in a modular fashion and all processing modules can be shared for any technique, a user can select necessary modules and easily edit the applying order of them based on the user's analysis strategy, which should be changed depending on the noise level of the image. The system provides a high-level GUI and a variety of image handling tools and therefore users can easily access the system and produce the optimal results without giving up in the middle of a process even for severely noise-contaminated interferometric images.

• ETRI Journal
• /
• 제34권5호
• /
• pp.727-733
• /
• 2012

This paper demonstrates a new driving scheme that allows reducing the supply voltage of data drivers for low-power active matrix organic light-emitting diode (AMOLED) displays. The proposed technique drives down the data voltage range by 50%, which subsequently diminishes in the peak power consumption of data drivers at the full white pattern by 75%. Because the gate voltage of a driving thin film transistor covers the same range as a conventional driving scheme by means of a level-shifting scheme, the low-data supply scheme achieves the equivalent dynamic range of OLED currents. The average power consumption of data drivers is reduced by 60% over 24 test images, and power consumption is kept below 25%.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1069-1078
• /
• 2018

Demand response (DR) programs give opportunity to consumers to manage their electricity bills. Besides, distribution system operator (DSO) is interested in using DR programs to obtain technical and economic benefits for distribution network. Since small consumers have difficulties to individually take part in the electricity market, an entity named demand response provider (DRP) has been recently defined to aggregate the DR of small consumers. However, implementing DR programs face challenges to fairly allocate benefits and payments between DRP and DSO. This paper presents a procedure for modeling the interaction between DRP and DSO based on a bilevel programming model. Both DSO and DRP behave from their own viewpoint with different objective functions. On the one hand, DRP bids the potential of DR programs, which are load shifting and load curtailment, to maximize its expected profit and on the other hand, DSO purchases electric power from either the electricity market or DRP to supply its consumers by minimizing its overall cost. In the proposed bilevel programming approach, the upper level problem represents the DRP decisions, while the lower level problem represents the DSO behavior. The obtained bilevel programming problem (BPP) is converted into a single level optimizing problem using its Karush-Kuhn-Tucker (KKT) optimality conditions. Furthermore, point estimate method (PEM) is employed to model the uncertainties of the power demands and the electricity market prices. The efficiency of the presented model is verified through the case studies and analysis of the obtained results.

• 자원ㆍ환경경제연구
• /
• 제33권2호
• /
• pp.113-133
• /
• 2024

태양광과 풍력을 중심으로 한 변동성 재생발전(VRE)은 탄소중립 달성의 주요수단이지만 높은 변동성과 불확실성으로 인해 전력공급의 안정성을 훼손시킨다. 에너지저장장치(ESS)는 수요이전을 통해 재생발전의 출력제한을 경감시킬 뿐만아니라 보조서비스 제공을 통해 안정적인 전력시스템 운영에 기여할 수 있다. 본 연구는 VRE로 인한 문제점이 점점 본격화되는 상황에서 ESS자원을 수요이전 기능과 예비력 제공기능 간에 어떻게 분배하는 것이 전력공급 효율성 최대화에 기여할 수 있는지 분석한다. 분석모형으로 재생발전의 변동성과 불확실성을 현실적으로 모의할 수 있는 확률적 전력시스템 최적화 모형을 적용하였다. 분석시점은 2023년과 2036년으로 설정하여 재생발전 보급수준별 ESS 최적자원분배 전략과 편익을 분석하였다. 분석결과는 크게 다음의 3가지로 요약가능하다. 첫째, ESS는 수요이전과 예비력 제공 모두에 탁월한 기능을 제공하며, 예비력 가격이 높게 설정될수록 수요이전 기능은 제한하고 예비력 제공에 집중함을 확인할 수 있었다. 둘째, 재생발전 출력제한은 필요예비력에 대한 대체재 역할을 하며, 예비력 가격 수준이 높아질수록 출력제한은 증가하고 필요예비력은 감소하는 것이 비용 합리적이다. 셋째, 기회비용이 반영된 합리적인 예비력 가격이 적용될 경우 ESS는 가까운 미래에 경제성을 확보할 수 있으며, ESS의 경제성은 재생발전 비중이 높을수록 더 커짐을 확인할 수 있었다. 본 연구는 전력공급 자원이 효율적으로 분배될 수 있는 가격기능이 바로 설때 비용 효율적인 전력부문 저탄소 전환이 가능함을 시사한다.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.483-499
• /
• 2020

In this paper, a novel analog signature scheme is proposed by modifying an RSA-based digital signature scheme with optical phase-shifting digital holography. The purpose of the proposed method is generating an analog signature to provide data confidentiality and security during the data transfer, compared to the digital signature. The holographic encryption technique applied to a hash value reveals an analog-type of pseudo-random pattern in the analog signature scheme. The public key and secret key needed to verify the analog signature are computed from public key ciphers which are generated by the same holographic encryption. The proposed analog signature scheme contains a kind of double encryption in the process of generating signature and key, which enhances security level more than the digital signature. The results of performance simulations show the feasibility of the highly secure signature scheme, and security analysis shows high robustness against known-message attacks and chosen-message attacks. In addition, the proposed method can apply to one-time signature schemes which can be used to sign only one message and it can also apply to authentication, e-mails, electronic banking and electronic data interchange.