• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.322-329
• /
• 2000

Current seismic design codes for building structures are based on the methods which can provide enough capacity to satisfy objected performance level and exactly evaluate the seismic performance of buildings. Pushover analysis of fast becoming an accepted method for the seismic evaluation of building structures. The popularity of this approximate, nonlinear static analysis method is due to its conceptual simplicity and ability to graphically describe a capacity and demand of structure. However, some of the shortcomings of the pushover analysis, especially for longer period and irregular buildings, is the inability of method to identify failure mechanisms due to effects of higher modes. In this paper proposed lateral load pattern which includes the contribution of higher modes of vibration for irregular building structure and compared to seismic response obtained by time history.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4E
• /
• pp.146-155
• /
• 2002

We present a new technique for achieving source separation when given only a single charmel recording. The main idea is based on exploiting the inherent time structure of sound sources by learning a priori sets of time-domain basis functions that encode the sources in a statistically efficient manner. We derive a learning algorithm using a maximum likelihood approach given the observed single charmel data and sets of basis functions. For each time point we infer the source parameters and their contribution factors. This inference is possible due to the prior knowledge of the basis functions and the associated coefficient densities. A flexible model for density estimation allows accurate modeling of the observation, and our experimental results exhibit a high level of separation performance for simulated mixtures as well as real environment recordings employing mixtures of two different sources. We show separation results of two music signals as well as the separation of two voice signals.

• The Korean Journal of Community Living Science
• /
• v.14 no.1
• /
• pp.37-53
• /
• 2003

The purpose of this study was to empirically verify influence of objective variables and subjective variables of life management strategy of unmarried man and women and provide a basis for the development of time management. The subject of this study were 355 unmarried men and women and interviewed with a questionnaire. The data were analyzed by SPSS program for the frequency, mean, standard deviation, t-test and regression analysis. The major results of this study were as follows: 1. The score of time management strategy of unmarried man and women was the highest. The score of leisure management strategy of unmarried man and women was the lowest. 2. Variables that affect overall life management strategy were academic career, degree of information using, fate control orientation and perception level of living relative to others. 3. The relative contribution of subjective variables on life management strategy were higher than objective variables.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.3
• /
• pp.413-426
• /
• 1996

Modern society, as a result of high industrial technology, is characterized by a series of mass production, moss consumption and mass disposal. As the mass disposal is known as the major culprit of destroying ecological system of our environment, human prosperity is in turn threatened by this indiscrete activities. Under current industrial technology which pursuit maximum profit, environmental problems could not be solved. This paper proposes recycle manufacturing systems of assemble products as a measure of current non-recycle manufacturing systems. Products are also composed of a number of ports. All parts are represented by a function of time cost performance variable as reuse level. We develop on information systems which give all the information on reused and recycled parts. We try to implement this result on a real fields. We confide ourselves to the contribution to on effective solution of environmental problems and to give profit to assembly manufacturing and consumers.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.636-643
• /
• 1995

The accurate determination of the fuel-cladding gap conductance as functions of rod burnup and power level may be a key to the design and safety analysis of a reactor. The incorporation of a sophisticated gap conductance model into nuclear design code for computing thermal hydraulic feedback effect has not been implemented mainly because of computational inefficiency due to complicated behavior of gap conductance. To avoid the time-consuming iteration scheme, simplification of the gap conductance model is done for the current design model. The simplified model considers only the heat conductance contribution to the gap conductance. The simplification is made possible by direct consideration of the gas conductivity depending on the composition of constituent gases in the gap and the fuel-cladding gap size from computer simulation of representative power histories. The simplified gap conductance model is applied to the various fuel power histories and the predicted gap conductances are found to agree well with the results of the design model.

• KIEAE Journal
• /
• v.2 no.4
• /
• pp.65-72
• /
• 2002

In this study, the evaluation of environmental performance of the building energy system of domestic commercial sector was carried out. Based on the theory of linear programming model, we established an evaluation model satisfying object functions and constraint conditions. Employing the model, the evaluation of building energy system was performed under the consideration of cost and environmental constraint conditions. As an evaluation tool, MARKAL (MARKet Allocation) known as a market distribution model was employed. We analyzed scenarios of Case I (Base Scenarios) through Case IX established by the combination of the components of building energy system such as glazing, building skin, core, and heat source system. According to the results of the evaluation, highest contribution on the useful energy demand was obtained from the building energy system combined with solar heat source system, when the total amounts of $CO_2$ exhaust as an environmental constraint condition is assumed to be the level of 1995.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2911-2916
• /
• 2014

The gas phase structures, energetics, and interconversion pathways of five lowest energy conformers of acetylcholine were examined employing the B3LYP, MP2, and CCSD(T) methods in conjunction with diverse basis sets including the correlation consistent aug-cc-pVDZ and aug-cc-pVTZ basis sets. It is found that use of adequate basis set containing proper polarization and diffuse functions capable of describing the floppy potential energy surface of acetylcholine is important in correctly predicting the relative stability of these conformers. The interconversion pathways and barrier heights between these conformers were elucidated by examining the potential energy surface for torsional motion, which also manifested the presence of chiral conformations of acetylcholine corresponding to the original conformations. On the basis of high level electronic energy calculations and thermal contribution analysis, four lowest energy conformers appear to be populated in the energy range of less than 1 kcal/mol at room temperature.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.27-34
• /
• 2015

If examining utilization by completion of National Competency Standards development, efforts are made so as to organize curriculum matched to education or training and perform subjects based on competence unit educationally in specialized high schools, colleges and university. However, National Competency Standards is insignificantly utilized in enterprises and on the spot due to characteristics of occupation type and diversity of process. This thesis intended to measures of safety efficiency improvement of final enterprise through the human resources assessment system of National Competency Standards based enterprise. Therefore, various methodologies were introduced and results of analysis by Balanced ScoreCard method were suggested for policy measures improving final safety efficiency. The results of this analysis are expected to make contribution to improving the effectiveness of the government's industrial safety and health policies through the establishment of systematic safety and health systems according to the risk level of individual business.

• Advances in aircraft and spacecraft science
• /
• v.9 no.4
• /
• pp.319-333
• /
• 2022

This work presents a numerical investigation of the aerodynamics and aero acoustics of the HVAB rotor in hover conditions. Two fully turbulent models are employed, the one-equation Spalart-Allmaras model and the two-equation k-ω SST model. Transition effects are investigated as well using the Langtry-Menter γ-Re θt transition transport model. The noise generation and propagation are being investigated using the Ffows-Williams Hawking model for far-field noise and the broadband model for near-field noise. Comparisons with other numerical solvers and with the PSP rotor test data are presented. The results are presented in terms of thrust and power coefficients, the figure of merit, surface pressure distribution, and Sound pressure level. Velocity, pressure, and vortex structures generated by the rotor are also shown in this work. In addition, this work investigates the contribution of different blade regions to the overall noise levels and emphasizes the importance of considering specific areas for future improvements.

• Journal of Distribution Science
• /
• v.12 no.10
• /
• pp.85-97
• /
• 2014

Purpose - This study aims to clarify through which process asset specificity and supplier development project (SDP) affect performance. Cooperation, partnership, the level of information exchange, and the importance of information sharing are considered significant variables as mediators related to the process. Finally, the performance formation model of the supply chain through asset specificity and supplier development project would be suggested as being a result of this study. Research design, data, and methodology - Data collection was as follows: questionnaires were distributed to 250 companies that have business ties with H Company. The empirical study to test our hypothesis was based on statistical analysis (using SPSS 19.0 and AMOS 19.0). The hypothesis of this paper is that the asset specificity and supplier development project variables have positive effects on the following variables: mediators such as cooperation and partnership (reliability and dependence); and the cooperation and partnership variables have a positive effect on the following variables: level of information sharing, the importance of information sharing, and level of information sharing; the importance of information sharing has a positive effect on supply chain performance. We tested our hypothesized model utilizing path analysis with latent variables. Results - First, it was found that asset specificity has significant positive effects on cooperation (H1), reliability (H2), and dependability (H3). Second, it was proved that the level of comprehension on the purpose of SDP has positive effects significantly on cooperation (H4), reliability (H5), and dependability (H6). Third, the hypotheses related to cooperation were all significantly accepted. The relationships of cooperation with the level (H7) and importance (H8) of information sharing were significant. Fourth, the hypotheses related to reliability were all significantly accepted. The relationships of reliability with the level (H9) and importance (H10) of information sharing were significant. In terms of dependability, however, the hypotheses were partially accepted. The effect of dependability was significant on the importance of information sharing (H12), but insignificant on the level of information sharing (H11). Finally, the causal relationships from the level of information sharing to SCM performance (H13) and from the importance of information sharing to SCM performance (H14) were both significantly accepted. Conclusion - First, with rapid changes in the business environment, enterprises should acquire the right information to properly implement SCM. For successful SCM, firms should understand the supplier development project. Second, asset specificity and the level of comprehension on SDP have significant effects both on cooperation and partnership (reliability and dependability). Third, mediators such as cooperation, reliability, and dependability significantly affect the level and importance of information sharing. Fourth, the level and importance of information sharing have significant impacts on SCM performance. This paper makes a meaningful contribution to further the understanding of how SDP affects SCM performance. Finally, successful SCM performance is achieved by information sharing through a collaborative environment and partnership (confidence & dependence) rather than by investing only in setting up an information system.