• Culinary science and hospitality research
• /
• v.7 no.3
• /
• pp.179-191
• /
• 2001

The effects of whole wheat flour on the Rheological Properties of dough gassing power of yeast S.cerevisiae and breadmaking properties were studied. The blending ratios of whole wheat flour to bread making flour were 0, 25, 50, 75 and water absorption in the farinography increasedlinerly from 62.5%in 100% bread making flour and 77.5% in 100% whole wheat flour. The hardness and cohesiveness of dough prepared with optimum moisture content was constant regardless of the blending ratio of whole wheat flour. whole wheat flour had no effect on the total gas production or the internal gas content in the dough at a constant moisture level but had detrimental effect on the loaf volume. In a dough at the optimum moisture level, whole wheat flour increased the two former parameters sensory evaluation indicated that the replacement in the range of 25 to 50% with whole wheat flour at the optimum moisture level was acceptable

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.151-155
• /
• 2017

Background: At the entrance of a tunnel, reflection of sunlight from the surrounding environment and a lack of adequate lighting usually cause some vision problems. The purpose of this study was to perform a safety evaluation of lighting on a very long road in Ilam, Iran. Methods: The average luminance was measured using a luminance meter (model S3; Hagner, Solna, Sweden). A camera (model 108, 35-mm single-lens reflex; Yashica, Nagano, Japan) was used to take photographs of the safe stopping distance from the tunnel entrance. Equivalent luminance was determined according to the Holliday polar diagram. Results: Considering the average luminance at the tunnel entrance ($116.7cd/m^2$) and using Adrian's equation, the safe level of lighting at the entrance of the tunnel was determined to be 0.7. Conclusion: A comparison between the results of the safe levels of lighting at the entrance of the tunnel and the De Boer scale showed that the phenomenon of black holes is created at the tunnel entrance. This may lead to a misadaptation of the drivers' eyes to the change in luminance level at the entrance of the tunnel, thereby increasing the risk of road accidents in this zone.

• Explosives and Blasting
• /
• v.17 no.1
• /
• pp.27-55
• /
• 1999

The excavation works for deep foundation in urban areas have recently increased complaints of blasting vibration and settlement of ground level. Foundation must be excavated approximately up to 24-28m depths from the surface. The roads and subway line pass through the excavation area. The Dae-chung station is also located at the nearest distance 5-35m from the working site. To protect subway station and adjacient some structures from blasting and settlement, the level of ground vibration, displacements and stress were monitored and analyzed. The results can be summarized as follows ; 1. An empirical particle velocity equation were obtained by test blasts at Nassan Missi 860 Office tel construction site. $V{\;}={\;}K(D/\sqrt{W})^{-n}$, where the values for n and k are estimated tobe 0.371 and 1.551. From this ground vibration equation, the max. charge weight per delay time against distance from blasting point is calculated. Detailed blasting method is also presented. 2. To measure the horizontal displacement in directions perpendicular to the borehole axis, 6 inclinometers installed around working sites. The displacement at the begining was comparatively high because the installation of struts was delayed, but after its installation the values showed a stable trend. Among them, the displacement by 3 inclinometers installed on a temporary parking area showed comparatively high values, for example, the displacement measured at hole No. IC-l recoded the max. 47.04mm for 6 months and at hole No. IC-2 recorded the max. 57.33mm for 7 months. So, all of these data was estimated below a safe standard value 103mm. 3. Seven strain gauge meter was installed of measure the magnitude and change of stress acted on structs. The measured value of maximum stress was $-465{\;}kgf/\textrm{cm}^2,{\;}-338.4{\;}kgf/\textrm{cm}^2,{\;}302.3{\;}kgf/\textrm{cm}^2$ respectively. In compareto the allowable stress level of steel, they are estimated to be safe.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.4
• /
• pp.318-321
• /
• 2006

This study was conducted in 2002 and 2003 to investigate variation on rice quality associated with cooking, and eating qualities under the three different fertilizer levels, none fertilizer level($N-P_2O_{5-}K_2O=0-0-0kg/ha$), ordinary fertilizer level($N-P_2O_{5-}K_2O=1l0-45-57kg/ha$), and heavy fertilizer level($N-P_2O_{5-}K_2O=180-90-110kg/ha$). The eight resistant near-isogenic lines(NILs) for bacterial blight in rice were examined for grain appearances, several physicochemical properties, and palatability value measured by Toyo taste meter. Significant variations in NILs(V), Years(Y), and VxY interaction were recognized in grain length and palatability value under the none fertilizer cultivation, in grain width under the heavy fertilizer cultivation, and in white belly ratio under the three different fertilizer cultivations, respectively. According to increase the fertilizer application rate, variation in grain length and grain width were not significant, but grain thickness was thinner under the ordinary and heavy fertilizer cultivations than under the none fertilizer cultivation. On the other hand, white belly ratio, protein content and Mg/K ratio increased, while amylose content and palatability value lowered. Alkali spreading value lowed under the heavy fertilizer cultivation than under the none and ordinary fertilizer cultivations. Palatability value was significantly low in the line carrying XalJ than in the other lines under the ordinary fertilizer cultivations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.38-44
• /
• 2001

In this paper, for the microwave level meter based on the FM-CW radar, we analyze the spectrum correlation of beat signals and propose a measurement algorithm using the theory. For industrial applications, level meters must have high precision, which requires a good linearity of VCO. But, in practice, it is very complicated or very expensive to make VCO linear enough to be acceptable in the industrial field. We propose a measurement algorithm using the fact that there exists a peak in the spectrum correlation of beat signals when range difference is sufficiently small. This makes it possible to determine the range difference in a precise manner even using a practical VCO. We present some experimental results to show the validity of this algorithm.

• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.73-86
• /
• 1995

The automatic control system in the greenhouse have to be developed to the direction of considering various factors the variables such as condition of the cultivation and greenhouse, the properties and types of products. Therefore, it is more important to set up variables appropriately than the problems of automatic control system itself, and the automatic control system which satisfy these problems should be simplified in the aspect of operation. In addition, even the individual automations are not perfect yet, so more studies are required for the development of comprehensive automatic system in korea. This study was carried out to automatize environment control systems for greenhouse, especially from most intensive labor requiring parts such as watering, irrigating liquefied fertilizer, spraying chemicals, mixing and ventilation system, etc. The results are summarized as follows. 1. Control type tensiometer was expected to be desirable in the automation of watering system, therefore, a new tensiometer was designed and developed through this study. 2. The chemical spraying system developed through this study was found to be excellent in the aspect of operation. 3. When pulse type water discharge meter was used in the mixing of liquefied fertilizer and chemical solution, the error of mixing were range $\pm$0.1~0.15%. 4. The water level switch of electrod type used for controlling water level was found to be affective in both control performance and operation cost. 5. The water and level control system can be omitted if each tank size are standardized in accordance with greenhouse size, therefore, the installation cost might be significantly reduced. 6. The developed general controller was excellent in hardware parts, but still remained to be improved in software parts.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.101-108
• /
• 2005

Inertial Navigation System has been used extensively to determine the position, velocity and attitude of the body. An INS is very expensive, however, heavy, power intensive, requires long setting times and the accuracy of the system is degraded as time passed due to the accumulated error. Global Positioning System(GPS) receivers can compensate for the Inertial Navigation System with the ability to provide both absolute position and attitude. This study describes a method to improve both the accuracy of a body positioning and the precision of an attitude determination using GPS antenna array. Existing attitude determination methods using low-cost GPS receivers focused on the relative vectors between the master and the slave antennas. Then the positioning of the master antenna is determined in meter-level because the single point positioning with pseudorange measurements is used. To obtain a better positioning accuracy of the body in this research, a wireless internet is used as an alternative data link for the real-time differential corrections and dual-frequency GPS receivers which is expected to be inexpensive was used. The numerical results show that this system has the centimeter level accuracy in positioning and the degree level accuracy in attitude.

• The Korea Journal of Herbology
• /
• v.32 no.2
• /
• pp.41-47
• /
• 2017

Objective : The aim of this study is to investigate anti-arthritis activity using a korea's natural monument No. 265 designate 'Yeonsan-Ogye'. In this study, research by using extracts from different concentration of the Yeonsan-Ogye through an MIA-induced arthritis animal model was being conducted in vivo and scientifically verifying the efficacy of medicinal food. Methods : Yeonsan-Ogye was administered 500 mg/kg/day, 1000 mg/kg/day, 2000 mg/kg/day to SD-Rat, where arthritis was induced by monosodium iodoacetate (MIA) at $60mg/m{\ell}$. MMP-9, COMP, CTXII, calcitonin and glycosaminoglycan level in serum were measured by ELISA. The changes of relative hind paw weight bearing ratio by Incapacitance Test Meter and The cartilage of meniscus volume was examined and 3-D high-resolution reconstructions of the cartilage of meniscus were obtained using a Micro-CT system. Also, the histopathological analysis of knee was observed by H&E and safranin-O staining. Results : Production of MMP-9, COMP (all groups) and CTXII (500, 1000 mg/kg/day) level in serum was decreased, respectively, in comparison with control. The other way, production of calcitonin (500, 1000 mg/kg/day) and glycosaminoglycan (all groups) level in serum, Hind paw weight bearing ratio (all groups) was increased, espectively, in comparison with control. The cartilage of patella volume in micro-CT increased significantly. In addition, all groups showed a increase in the cartilage volume and proteoglycan. Conclusion : The results for Yeonsan-Ogye showed significant antiarthritis activity in serum and the cartilage. Therefore, it is thought to be that Yeonsan Ogye can be utilized as a variety of new korea medicie and health foods against arthritis diseases.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.133-137
• /
• 1969

This experiment was conducted to determine the optimum row width and plant spacing within row under the tropical environment for a leading soybean variety Palmetto and it was carried out at Eakmat Experiment Station in Vietnam. The experiments were arranged in a split plot design with four replications and the test was repeated twice in two years. Variations for seed yield due to the distance between rows were significant at 1 per cent level in 1967 test(dry season growing) and at 5 per cent level in 1968 test. Significant differences for plant height, lodging, maturity, number of branches per plant, and number of pods per plant due to the row width were not found in both tests, while significant differences in difference spacing within row was found in all traits studied. Interaction between width of row and spacing within row for seed yield and plant height were found at five percent level in 1967 test. These results indicate that close planting may increase in seed yield and plant height in both seasons, and decrease in loadging. From these studies, one could be understood that the plant population, particularly in dry season, plays decisive roles on seed yield in soybean culture, and the maximum plant height and minimum value of lodging index were also observed in closest spacing plots. The highest soybean yield in late planting would be expected by a combinations of 30 cm(between rows)${\times}$5cm(between hills) plot, while 40cm ${\times}$ 5cm planting method would be suggested for rainy season growing. Highest seed yield was obtained at closet spacing in both dry and rainy season, and these results led to drilling method in seeding where about 20 seeds per meter of row could be recommended. Besides the seed yield, the close planting may produce some advantages, such as increase plant height and decrease lodging, weeds and erosion of surface soil.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1353-1362
• /
• 2023

Various methods are being attempted to resolve the inconvenience of blood glucose meters used to check blood sugar levels. In this paper, we attempted to estimate blood sugar levels non-invasively using machine learning technology from spectral data acquired using a near-infrared sensor. The non-invasive blood glucose meter used in the study has a total of six near-infrared ray emitters, including visible rays, and a light receiver that receives them. It is a device created to collect spectral data on specific parts of the human body, such as the fingers. To verify whether there was a significant difference depending on blood sugar level, we attempted to estimate blood sugar level through machine learning algorithms. As a result of applying five machine learning algorithm techniques to the collected data and adjusting various hyper parameters, it was confirmed that the support vector regression algorithm showed the best performance.