• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.21-29
• /
• 2017

This study was conducted to determine the effects of artificial lighting sources on vegetative growth of Phalaenopsis and Doritaenopsis (an intergeneric hybrid of Doritis and Phalaenopsis) orchids. One - month - old plants were cultivated under fluorescent lamps, cool - white light - emitting diodes (LEDs), or warm - white LEDs at 80 and $160{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The blue (400 - 500 nm) : green (500 - 600 nm) : red (600 - 700 nm) : far - red (700 - 800 nm) ratios of the fluorescent lamps, cool-white LEDs, and warm-white LEDs were 1 : 1.3 : 0.8 : 0.1, 1 : 1.3 : 0.6 : 0.1, and 1 : 2.7 : 2.3 : 0.4, respectively. Each light treatment was maintained for 16 weeks in a closed plant-production system maintained at $28^{\circ}C$ with a 12 h photoperiod. The longest leaf span, as well as the leaf length and width of the uppermost mature leaf, were observed in plants treated with warm-white LEDs. Plants grown under fluorescent lamps had longer and wider leaves with a greater leaf span than plants grown under cool-white LEDs, while the maximum quantum efficiency of photosystem II was higher under cool-white LEDs. The vegetative responses affected by different lighting sources were similar at both 80 and $160{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Leaf span and root biomass were increased by the higher light intensity in both cultivars, while the relative chlorophyll content was decreased. These results indicate that relatively high intensity light can promote vegetative growth of young Phalaenopsis plants, and that warm - white LEDs, which contain a high red-light ratio, are a better lighting source for the growth of these plants than the cool-white LEDs or fluorescent lamps. These results could therefore be useful in the selection of artificial lighting to maximize vegetative growth of Phalaenopsis plants in a closed plant - production system.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.258-266
• /
• 2019

This study was conducted to apply natural river technologies to levees and examine the results. The new eco-friendly bio-polymer was applied, a combination of eco-friendly biopolymers and soil, to levee slope to enhance durability and eco-friendliness and to establish reinforcement measures against unstable levees due to overtopping. A semi-prototype levee of 1 m in height, 3 m in width, with a 1:2 slope and 5 m length, was constructed at the Andong River Experiment Center. The bio-soil mixed with the biopolymer and the soil at an appropriate ratio was treated with a 5 cm thickness on the surface of levee to perform the stability evaluation according to overtopping. Using the pixel-based analysis technique using the image analysis program, the breached area of levee slope was calculated over time. As a result, the time for complete decay occurs more than 12 times than that of ordinary soil levee. Therefore, when the new substance is applied to the surface of levee, the decay delay effect appears to be high.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.1
• /
• pp.63-72
• /
• 2005

Chirisan National Park, the first and largest one out of 20 national parks in Korea, is divided into five zones. They are composed of nature preservation zone, natural environment zone, natural residential zone, concentrated residential zone, and collective facility zone. However, the park is not a continuous habitat: roads, trails, local residences, and various facilities created the habitat mosaics severely fragmented. We investigated the fragmentation pattern of the park due to roads and mountain trails using GIS. Based on perimeter length, area, and the ratio of perimeter to area of each patch, we obtained landscape analysis indices which reflect the regularity of the patch shape. The 1 m-wide hiking trails divided the park into 491 fragments. The legal trails with 1.5 m - 3 m width which have been heavily used by hikers generate 58 fragments. Even the nature preservation zone, corresponding to a core zone comprising 31.8% of the park area, was divided into 37 fragments because of the roads and mountain trails. With the different widths of buffer applied, the core sizes of the fragments were reduced. When the 60 m buffer was applied, the patch interior areas ranged from 0.0001 to 47.77 $km^2$ with a mean of 7.08 $km^2$. The landscape shape indices were far greater than 1 for most of the cases with a maximum value of 25. These results clearly indicate that Chirisan National Park is not a continuous habitat, but mosaics of small, irregularly shaped habitat fragments. It is necessary to take the size and shape of the fragmented habitats into consideration when nature conservation is planned, especially for large wildlife such as brown bears.

• The Journal of the Korea Contents Association
• /
• v.15 no.3
• /
• pp.427-437
• /
• 2015

Concrete, as a construction material, needs suitable reinforcement for tensile region due to weak tensile strength. Many researches on cement reduction have been attempted for $CO_2$ emissions during cement clinker production. In this paper engineering properties of concrete enhanced with polypropylene fiber (PPF) and rice husk ash (RHA) are evaluated. Fiber volume ratios of 0.125~0.375 and RHA replacement ratio of 0~20% are considered for concrete mixture. Lots of test including compressive, split, flexural and the related crack width, impact energy, and pull out test are performed and the results are evaluated considering the fiber ratios, fiber length and RHA replacement. Fiber and RHA ratios have dominant effects on tensile and compressive characteristics respectively, and the concrete with 0.125% of PPF and 10% of RHA shows the most effective enhancement for engineering properties. Appropriate addition of RHA and PPF are very effective both for engineering property enhancement and clean technology.

• Advances in pediatric surgery
• /
• v.8 no.1
• /
• pp.28-32
• /
• 2002

Meckel's diverticulum (MD) occurs in approximately 2 % of the population. The major complications of MD are bleeding, intestinal obstruction, infection and perforation. Perforation is the least common but most serious complication, the incidence od which is about 5-10 %. The causes of perforation are inflammatory diverticulitis and peptie ulceration. the purpose of study is to review the characteristics of perforated MD in children. Six patients with perforated MD who had been operated upon at the Department of Pediatric Surgery, Yeungnam University Hospital from April 1984 to July 2001 were included. Male predominated in a ratio of 5:1 and there were 2 neonates. The chief complaints were abdominal pain and distension. Half of the children showed a past history of bloody stools. The average age was 4 year and 9 months. The mean distance from the ileocecal valve to the diverticulum was 60 cm. Average length of the diverticulum was approximately 3 cm and width was 1.7 cm. The perforation site was the tip of the diverticulum in 3 cases, the base in 2 cases and along the lateral border in one. In two patients, ectopic gastric mucosa was found in the specimen. All of the patients were operated upon with a diagnosis of peritonitis of unknown etiology. In conclusion, when a child shows symptoms of acute abdomen or peritonitis, especially in boys, with the history of bloody stools and episodic abdominal pain, perforated MD should be suspected.

• Korean Journal of Plant Resources
• /
• v.25 no.2
• /
• pp.257-270
• /
• 2012

The taxonomic relationship of 3 taxa in $Carex$ sect. $Siderostictae$ were revealed by morphological and molecular studies. The morphological characteristics of Korean $Carex$ siderosticta Hance, which is a type species of sect. $Siderostictae$, was first reviewed in comparison with previous records in order to identify the difference. Then the distribution map of this species was formulated through previous floral literatures and voucher specimens. Although the leaf shape which is represented by length/width ratio showed a great variation depending on habitat condition, the rhizome creeping patterns, the presence of hair on the surface leaf margin and perigynium were shown to be good diagnostic characters to define delimitation of species level. The results from molecular study supported $C.$ $ciliatomarginata$ Nakai should be ranked independently on species level.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.139-151
• /
• 2014

In this study, virtual confluence of $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $75^{\circ}$ type flowing into main channel was designed to comprehend occlusion phenomenon of the mouth of river, then performed numerical analysis using the RMA-2 and SED2D model of SMS according to application of 40m, 60m, 80m, 100m Training levee corresponding to main channel width ratio. Results of simulations analysis are summarized as follows. Applying appropriate Training levee length determined by numerical analysis results, Training levee dimension for occlusion reduction was studied through the analysis of velocity, water level, bed variation at the Gamchen confluence and Wichen confluence.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.1
• /
• pp.43-48
• /
• 2015

This study was carried out in order to investigate the photosynthesis response and leaf characteristics of Peucedanum japonicum growing in forest farming. The experiment was performed by leaf mold (pine tree and chestnut tree) and shading levels (0%, 35%, 50% and 75% shading). Light relative intensity was 100% (full sunlight), 60.3% (35% shading), 35.1% (50% shading), and 17.4% (75% shading) respectively. Light response curves of pine-leaf mold and chestnut-leaf mold were the highest in control (full sunlight) and these were getting lower in the higher shading level. Photosynthesis capacity and light saturation point were indicated higher in chestnut-leaf mold within the same shading level. As the shading level increased, maximum photosynthesis rate decreased. And apparent quantum yield was not indicated statistically significant difference from all treatment. Leaf area, leaf length and leaf width were significant higher in 35% shading and control under chestnut-leaf mold in all treatment. As the shading level increased, LAR (leaf area ratio), SLA (specific leaf area) and SPAD value decreased in pine-leaf mold and chestnut-leaf mold. As a result of surveying the whole experiment, P. japonicum is judged better growth and higher yield by maintaining 35% shading (relative light intensity 60%) under chestnut-leaf mold in forest farming.

• Journal of Aquaculture
• /
• v.8 no.1
• /
• pp.69-76
• /
• 1995

Hybrid fish were induced between olive flounder (Paralichthys olivaceus) female and spotted flounder (Verasper variegatus) male by artificial inseminations. Survival, growth and morphological changes in larval stage of hybirds were examined and compared to their parental species. Survival and growth up to 25 days after hatching of the hybrids were more similar to those of olive flounder than to those of spotted flounder (P<0.05). The ratio of yolk length to yolk width in hybrids was similar to that of female parents (P<0.05). The oil globule were resorbed within 18 days after hatching in hybrids and 14 days after hatching in olive flounder, and spotted flounder has no oil globule. These results indicated that survival, growth and morphological changes in larval stage of hybrids were similar to those of maternal olive flounder.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.327-341
• /
• 2017

Openings in slabs are usually required for many different applications such as aeriation ducts and air conditioning. Opening in concrete slabs due to cutouts significantly decrease the member stiffness. There are different techniques to strengthen slabs with opening cutouts. This study presents experimental and numerical investigations on the use of Carbon Fiber Reinforced Polymers (CFRP) as strengthening material to strengthen and restore the load carrying capacity of R.C. slabs after having cutout in the hogging moment region. The experimental program consisted of testing five (oneway spanning R.C. flat slabs) with overhang. All slabs were prismatic, rectangular in cross-section and nominally 2000 mm long, 1000 mm width, and 100 mm thickness with a clear span (distance between supports) of 1200 mm and the overhang length is 700 mm. All slabs were loaded up to 30 kN (45% of ultimate load for reference slab, before yielding of the longitudinal reinforcement), then the load was kept constant during cutting concrete and steel bars (producing cut out). After that operation, slabs were loaded till failure. An analytical study using finite element analysis (FEA) is performed using the commercial software ANSYS. The FEA has been validated and calibrated using the experimental results. The FE model was found to be in a good agreement with the experimental results. The investigated key parameters were slab aspect ratio for the opening ratios of [1:1, 2:1], CFRP layers and the laminates widths, positions for cutouts and the CFRP configurations around cutouts.