• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.147-155
• /
• 1977

In this experiment, we expected yield increase depending on the control of ineffective tiller, heightening of effective tillering ratio and continuous supply of nitrogen until later growth stage of rice plant by deep layer split application. Treats were applied at Tongil and Jinheung variety, clayey loam and sandy loam soil, and drained and non-drained condition. Nitrogenous fertilizer application wab adopted as liquefied(50%) and lumped (50% and 80%) fertilizer at 12cm depth of soil before 35 days of rice heading time against the standard soil surface application. The results are summarized as follaw. 1. a. Jinheung showed great variant width of tiller numbers per rice plant growth stage, and low effective tillering ratio at soil surface dressing. But in the case of deep layer split application, the number of tiller increased normally, and effective tillering ratio was high. b. At Tonsil, the width of increase and decrease range of effective tiller number between soil surface dressing and deep layer split application was not so high as Jinheung. Deep layer split application of 80% lumped fertilizer showed maximum effective tillering ratio ($83%{\sim}93%$). C. In the case of Jinheung, it was supposed that deep layer split application of 80% lumped fertilizer was excessive nitrogen quantity. d. Effective tillering ratio was higher than Tonsil at Jinheung. 2. The number of grains per hill was increased by the deep layer split application, but the ripening ratio was decreased inversely with the increase of total grain number. 3. Length of top leaves was elongated at Jinheung by deep layer split application. It showed significant correlation between top leaves length and grain yield. 4. Deep layer split application inclosed N content of harvested straw. Yield and N content of straw showed possitive correlation. 5. The ratio of unhulled grain yield per straw weight was increased by deep layer splication. This ratio was higher at Jinheung than Tonsil. 6. Grain yield was appeared in order of 80% lumped fertilizer>50% lumped fertilizer>50% liquefied fertilizer>surface dressing by the deep layer split application. The yield increasing factors were the increasing of effective tillering ratio, number of panicles per hill and number of ripening grains per hill. 7. Grain yield was increased at Tongil in sandy loam soil and at Jinheung in clayey loam soil by deep layer split application. 8. The grain yield was increased at drained conditions of clayey loam soil and non-drained conditions of sandy loam soil. But in the case of 80% lumped fertilizer of deep layer split application at the sandy loam soil, the yield was not increased at non-drained conditions. 9. The effect of yield increase by deep layer split application comparing with the surface dressing was higher at Tonsil than ginheung, in spite of low ripening ratio of Tonsil caused by low temperature at heading and harvesting time.

• Korean Journal of Veterinary Research
• /
• v.28 no.2
• /
• pp.213-219
• /
• 1988

The measurement was investigated with 18 heads of fetus(60, 90, 120 days of gestation) and neonate in Korean native goats. The results were summerized as follows: 1. The crown-rump length of fetuses at 60, 90, 120 days of gestation and neonate was 8.71, 20.83, 31.10 and 34.93 cm, respectively. 2. The length of small intestine at 60, 90, 120 days of gestation and neonate was 32.28, 157.10, 303.52 and 457.06 cm, respectively. 3. The length of large intestine at 60, 90, 120 days of gestation and neonate was 9.20, 37.70, 82.06 and 94.46 cm, respectively. 4. The ratio of intestinal length to crown-rump length at 60, 90, 120 days of gestation and neonate was 4.76, 9.45, 12.40 and 15.79 times, respectively. 5. At 60 days of gestation, the total length of the vertebral column was $7.40{\pm}0.72cm$, The mean length of each segment of the vertebral column was $1.55{\pm}0.20cm$ in cervical, $2.29{\pm}0.21cm$ in thoracic, $1.46{\pm}0.10cm$ in lumbar, $0.51{\pm}0.04cm$ in sacral and $1.59{\pm}0.17cm$ in coccygeal vertebrae. 6. At 90 days of gestation, the total length of the vertebral column was $16.52{\pm}0.80cm$. The mean length of each segment of the vertebral column was $3.72{\pm}0.12cm$ in cervical, $5.09{\pm}0.26cm$ in thoracic, $3.22{\pm}0.04cm$ in lumbar, $1.97{\pm}0.03cm$ in sacral and $2.64{\pm}0.35cm$ in coccygeal vertebrae. 7. At 120 days of gestation, the total length of the vertebral column was $26.35{\pm}0.34cm$. The mean length of each segment of the vertebral column was $6.09{\pm}0.16cm$ in cervical, $7.81{\pm}0.07cm$ in thoracic, $5.08{\pm}0.07cm$ in lumbar, $3.07{\pm}0.02cm$ in and $4.31{\pm}0.02cm$ in coccygeal vertebrae. 8. In the neonate, the total length of the vertebral column was $32.41{\pm}1.57cm$. The mean length of each segment of vertebral was $7.70{\pm}0.25cm$ in cervical, $9.97{\pm}0.68cm$ in thoracic, $5.58{\pm}0.44cm$ in lumbar, $3.85{\pm}0.15cm$ in sacral and $5.05{\pm}0.06cm$ coccygeal vertebrae. 9. The chest girth at 60, 90, 120 days of gestation and neonate was $6.13{\pm}0.51$, $13.45{\pm}0.84$, $20.28{\pm}1.53$ and $22.94{\pm}1.75cm$, respectively. 10. The head length at 60, 90, 120 days of gestation and neonate was $2.93{\pm}0.07$, $6.67{\pm}0.13$, $8.84{\pm}0.51$ and $9.76{\pm}0.44cm$, respectively. 11. The width of the head at 60, 90, 120 days of gestation and neonate was $2.20{\pm}0.13$, $4.45{\pm}0.11$, $5.33{\pm}0.20$ and $5.51{\pm}0.32cm$, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.1
• /
• pp.7-11
• /
• 1987

The influence of planting density, on the mulberry yield, had been studied for 5 years period since 1982. For this purpose, a hilly land (15$^{\circ}$) was selected and 5 planting density level (926, 1,667, 2,780 and 3,444 tree/10a) were used. Following results were obtained. 1. Vinyl mulching promoted 2 days earlier of green tip sprouting stage and 3 days earlier of shallow-bill stage, compared with the non-mulching. 2. It was shown that increase of the length of the branch with vinyl mulching and decrease of the mulching effect with the higher density of plants from, 2,780 tree/10a. 3. When the planting density was higher, length and width of leaf was decreased sharply, and chlorosis of the lower part of the branch was occured heavily. 4. With the higher planting density, number of branches per tree and average length of the branch was decreased. Number of shorter branch-normal branch ratio were increased. However, number of branches and total length of branch per area were shown opposite. 5. Yield of mulberry was increased for the peroid of 3 years after planting with the all the levels of planting density after that, yield increase was dully in 926 tree plot, and more dully in 1,677 trees plot, while decrease of the yield were showen with density of 2,780 and 3,444 trees plots. 6. The highest average yield for the 5 years were obtained from 2,780 trees plot, 46.6% higher than in 926 trees plot, followed 40% higher in 3,444 trees plot, and 29.9% higher in 1,667 trees plot. 7. Soil pH, organic matter, Ca and Mg decreased with cultivation, especially P2O5, pH, Ca and Mg in the density of more than 926 trees plot.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.1
• /
• pp.35-39
• /
• 1995

Characteristics of Schizandra chinensis BAILLON collected were investigated the development of the new varieties and the results obtained are as follows: Flowering time of Schizandra chinensis varieties were varied from May 6 to 15. In petal base colors 70% were light pinked-colored, 23% were dark pinkcolored and 23% were white-colored respectively and number fruit set per node are 2 to 3 and 60% of plants were flower set and length of diameter of female flower longer than those of male flowers. Among 155 plants investigated, 125 plants showed below 40% of fruit setting and average fruit setting were 26%, 83% of plants were below 12mm, white 17% were above 12.1mm in fruit length, 100 dry fruit weight was 13.2g on average showing significant variation among plants. Average values of major characteristics of populations of collected varieties were 82.5 in number of fruit set, 68.3 in number of fruits 68.3mm in length of fruit set, 22.8mm in width of fruit set, 10.7mm in length of granule 103.1g in dry fruit weight per plants and ratio of dry fruit was 26.8% respectively.

• Journal of Sasang Constitutional Medicine
• /
• v.12 no.2
• /
• pp.123-131
• /
• 2000

1. Background and Purpose The faces of human being change as they grow older. Therefore, we must consider the changes of the face when we diagnosed the Sasang Constitution of men through the analysis of facial appearance. As a study of all the standardization researches about the morphology of face, I carried out this study about the 50's and 60's of Korean men and women according to Sasang Constitution. 2. Objectives The object of this study is selected from the patients who were already diagnosed Sasang Constitutions at the department of Sasang Constitutional Medicine in Kyunghee Oriental Medical Center. The number of the patients were 74 men and 73 women in 50's and 60's. The number of general age group were 182 men and 180 who were also diagnosed Sasang Constitutions at the department of Sasang Constitutional Medicine at the same period. 3. Method I took the photographs of front view and lateral view of the objectives by digital camera and obtained the 200 measure through the facial measurement program. I compared the measure of 50's and 60's by three constitutional groups and I also compared the measure between 50's to 60's and all ages by three constitutional groups. 4. Results In men group, the measures which made differences by each constitutional groups were 17, and they were 6 in 50's and 60's. In women group, the measures which made differences by each constitutional groups were 52, and they were 33 in 50's and 60's 5. Conclusion (1) In the men group of 50's and 60's, Taeumin showed wide bigonial breadth, Soyangin showed long brow and Soumin showed big eyes. (2) In the women group of 50's and 60's, Taeumin showed the longest level of facial length, width and metopion head length, Soyangin showed metopion head length was long and the nose was also long, Soumin showed the ratio of brow in the face didn't make any difference with other constitutions and the metopion head length was short. (3) The measures which made differences were more in the all ages than in the 50's and 60's. It means that the differences decrease as they grow older, especially in 50's and 60's.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.115-125
• /
• 2022

The high-Reynolds number flow around a rectangular cylinder, having streamwise to crossflow length ratio equal to 5 is analyzed in the present paper. The flow is characterized by shear-layer separation from the upstream edges. Vortical structures of different size form from the roll-up of these shear layers, move downstream and interact with the classical vortex shedding further downstream in the wake. The corresponding mean flow is characterized by a recirculation region along the lateral surface of the cylinder, ending by mean flow reattachment close to the trailing edge. The mean flow features on the cylinder side have been shown to be highly sensitive to set-up parameters both in numerical simulations and in experiments. The results of 21 Large Eddy Simulations (LES) are analyzed herein to highlight the impact of the lateral mean recirculation characteristics on the near-wake flow features and on some bulk quantities. The considered simulations have been carried out at Reynolds number Re=DU_∞/ν=40 000, being D the crossflow dimension, U_∞ the freestream velocity and ν the kinematic viscosity of air; the flow is set to have zero angle of attack. Some simulations are carried out with sharp edges (Mariotti et al. 2017), others with different values of the rounding of the upstream edges (Rocchio et al. 2020) and an additional LES is carried out to match the value of the roundness of the upstream edges in the experiments in Pasqualetto et al. (2022). The dimensions of the mean recirculation zone vary considerably in these simulations, allowing us to single out meaningful trends. The streamwise length of the lateral mean recirculation and the streamwise distance from the upstream edge of its center are the parameters controlling the considered quantities. The wake width increases linearly with these parameters, while the vortex-shedding non-dimensional frequency shows a linear decrease. The drag coefficient also linearly decreases with increasing the recirculation length and this is due to a reduction of the suctions on the base. However, the overall variation of C_D is small. Finally, a significant, and once again linear, increase of the fluctuations of the lift coefficient is found for increasing the mean recirculation streamwise length.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.3
• /
• pp.173-180
• /
• 1995

This experiment was carried out to clarify the effect of root diameter and length on yield in Rehmannja glutionosa on experimental fields of Chungbuk Provincial Rural Development Ad­ministration. Emergance date was faster Sand 10 days with root diameter 3mm and 9mm than that of root diameter 6mm. Emergance ratio was high in the order of 6mm >7mm > 9mm with root diameter, and bolting ratio was increased in the order of 9mm > 6mm > 3mm with root diameter. Leaf length had no differences betwere root diameter and length, and leaf width had same tendency. Content of inorganic matter such as T - N, $P_2O_5,\;K_2O,\; C_aO,\;M_gO$ was high measuring date was delayed, and higher in root than leaf. Sugar content was higher in November than in October and had no differences with root diameter, but was more de­creased as the root length was longer. Yield was increased 9 % with root diameter 9mm. Comparing with root length, yield was higer 5% with 6cm than that of 1, 172kg/10a with 3cm, and decreased 25% with 9cm. And the profitable root was considered root diameter 8mm and root length 6cm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.23-35
• /
• 2011

The pedestrian green time is usually long at wide width intersections. This sometimes causes the increase of delay on the whole intersection because of long cycle length and thus small g/C ratio on some direction. In this paper, to improve these problems, staggered pedestrian crossing was evaluated on the vehicular and pedestrian aspects. The results were gained by using both TRANSYT-7F and VISSIM model. The vehicle control delay of the staggered pedestrian crossing was estimated to be decreasing than that of the general pedestrian crossing by 14.9% to 85.6%. The pedestrian average delay of two pedestrian crossing systems was examined by analytical method and VISSIM. According to the analytical method there was no significant difference between each pedestrian crossing system. The pedestrian delay of staggered pedestrian crossing was from 13.4% to 22.3% than the general pedestrian crossing by VISSIM. In conclusion, the staggered pedestrian crossing was more effective than general pedestrian crossing for both the vehicle and the pedestrian. However this conclusion was resulted from micro simulation where traffic volume condition, v/c, was from 0.8 to 1.1.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.3
• /
• pp.5-12
• /
• 2011

In this paper, after studying structural performance for the representative corrugated steel plate used in Korea, we proposed the optimum shape for section of corrugated steel plate considering a width of steel plates that can be produced currently in the factory. Using AISI(1986) in examination for the performance of the corrugated steel plate, we determined the mechanical limit of the optimum sections considering shear force and bending moment of corrugated steel plate and also determined the geometric limit of them considering formability, shapes and ratio between width of steel plate before forming and that after forming. As a result of examination for performance of steel plate applying algorithm for searching optimal sections algorithm developed in this study to the existing representative corrugated steel plate, allowable force and moment of inertia indicated the maximum values at bending radius 76mm and internal bending angle $50^{\circ}$. And as an application result of the optimum design system that used SS490 with 1,550mm of width and 4,700mm of length considering current production situation in Korea, we developed the new section with more than 2 times of structural performance comparing with existing corrugated steel plate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.11-22
• /
• 1987

A plane buoyant jet discharged vertically upward into a crossflow is analyzed by numerical solution of the governing equations of continuity, momentum and constituent transport. The turbulent transport is modelled by the Prandtl's mixing length theory. In the numerical solution procedure, the governing equations are transformed by stream function and vorticity transport, non-dimensionalyzed by discharge velocity, slot width, and parameters representing flow characteristics, and solved by Gauss-Seidel iteration method with successive underrelaxation. The numerical experiments were performed for the region of established flow of buoyant jet in the range of discharge densimetric Froude number of 4 to 32 and in the range of velocity ratio of 8 to 15, which is the ratio of discharge velocity to crossflow velocity. Variations of velocities and temperatures, flow patterns and vorticity patterns of receiving water due to buoyant jet were investigated. Also investigated are the effects of velocity ratio and discharge densimetric Froude number on the trajectories of buoyant jet. Computed are velocities, temperatures and local densimetric Froude numbers along the trajectory of the buoyant jet. Spreading rate and dispersion ratio were analyzed in terms of discharge densimetric Froude number, local densimetric Froude number and distance from the source along the jet trajectory. It was noted that the similarity law holds in both the profiles of velocity and temperatures across the jet trajectory and the integral type analysis of Gaussian distribution is applicable.