• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.1
• /
• pp.4592-4598
• /
• 1978

The purpose of this research is to find out mathemetically an economical intake water depth in the design of head works through the derivation of some formulas. For the performance of the purpose the following formulas were found out for the design intake water depth in each flow type of intake sluice, such as overflow type and orifice type. (1) The conditional equations of !he economical intake water depth in .case that weir body is placed on permeable soil layer ; (a) in the overflow type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }+ { 1} over {2 } { Cp}_{3 }L(0.67 SQRT { q} -0.61) { ( { d}_{0 }+ { h}_{1 }+ { h}_{0 } )}^{- { 1} over {2 } }- { { { 3Q}_{1 } { p}_{5 } { h}_{1 } }^{- { 5} over {2 } } } over { { 2m}_{1 }(1-s) SQRT { 2gs} }+[ LEFT { b+ { 4C TIMES { 0.61}^{2 } } over {3(r-1) }+z( { d}_{0 }+ { h}_{0 } ) RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L+ { dcp}_{3 }L+ { nkp}_{5 }+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ] =0}}}} (b) in the orifice type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }+ { 1} over {2 } C { p}_{3 }L(0.67 SQRT { q} -0.61)}}}} {{{{ { ({d }_{0 }+ { h}_{1 }+ { h}_{0 } )}^{ - { 1} over {2 } }- { { 3Q}_{1 } { p}_{ 6} { { h}_{1 } }^{- { 5} over {2 } } } over { { 2m}_{ 2}m' SQRT { 2gs} }+[ LEFT { b+ { 4C TIMES { 0.61}^{2 } } over {3(r-1) }+z( { d}_{0 }+ { h}_{0 } ) RIGHT } { p}_{1 }L }}}} {{{{+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 } L+dC { p}_{4 }L+(2 { z}_{0 }+m )(1-s) { L}_{d } { p}_{7 }]=0 }}}} where, z=outer slope of weir body (value of cotangent), h1=intake water depth (m), L=total length of weir (m), C=Bligh's creep ratio, q=flood discharge overflowing weir crest per unit length of weir (m3/sec/m), d0=average height to intake sill elevation in weir (m), h0=freeboard of weir (m), Q1=design irrigation requirements (m3/sec), m1=coefficient of head loss (0.9∼0.95) s=(h1-h2)/h1, h2=flow water depth outside intake sluice gate (m), b=width of weir crest (m), r=specific weight of weir materials, d=depth of cutting along seepage length under the weir (m), n=number of side contraction, k=coefficient of side contraction loss (0.02∼0.04), m2=coefficient of discharge (0.7∼0.9) m'=h0/h1, h0=open height of gate (m), p1 and p4=unit price of weir body and of excavation of weir site, respectively (won/㎥), p2 and p3=unit price of construction form and of revetment for protection of downstream riverbed, respectively (won/㎡), p5 and p6=average cost per unit width of intake sluice including cost of intake canal having the same one as width of the sluice in case of overflow type and orifice type respectively (won/m), zo : inner slope of section area in intake canal from its beginning point to its changing point to ordinary flow section, m: coefficient concerning the mean width of intak canal site,a : freeboard of intake canal. (2) The conditional equations of the economical intake water depth in case that weir body is built on the foundation of rock bed ; (a) in the overflow type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }- { { { 3Q}_{1 } { p}_{5 } { h}_{1 } }^{- {5 } over {2 } } } over { { 2m}_{1 }(1-s) SQRT { 2gs} }+[ LEFT { b+z( { d}_{0 }+ { h}_{0 } )RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L+ { nkp}_{5 }}}}} {{{{+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ]=0 }}}} (b) in the orifice type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }- { { { 3Q}_{1 } { p}_{6 } { h}_{1 } }^{- {5 } over {2 } } } over { { 2m}_{2 }m' SQRT { 2gs} }+[ LEFT { b+z( { d}_{0 }+ { h}_{0 } )RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L}}}} {{{{+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ]=0}}}} The construction cost of weir cut-off and revetment on outside slope of leeve, and the damages suffered from inundation in upstream area were not included in the process of deriving the above conditional equations, but it is true that magnitude of intake water depth influences somewhat on the cost and damages. Therefore, in applying the above equations the fact that should not be over looked is that the design value of intake water depth to be adopted should not be more largely determined than the value of h1 satisfying the above formulas.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.625-633
• /
• 2016

This study was conducted to investigate the influence of hydrophilic polymer (HP) mixture ratio (Control, 1.0%, 2.5%, 5.0%, and 10.0%) on growth of eggplant (Solanum melongena) for lower maintenance urban agriculture via green roofs. Although it was not statistically significant (p > 0.05), substrate temperature was decreased as hydrophilic polymer mixture ratio were increased. High substrate water content (95%) was found consistently in growing media under elevated hydrophilic polymer mixture ratio at over 5% during the entire growing period. Substrate electronic conductivity was increased as hydrophilic polymer mixture ratio were increased. Growth index was decreased as hydrophilic polymer mixture ratio was increased. It was reduced about 1/3 and 1/5 compared to that of Control in HP5.0 and HP10.0 treatment plants, respectively. Number of leaves, leaf length, and leaf width were decreased in following order: Control> HP1.0> HP2.5> HP5.0> HP10.0 treatments. There numbers were significantly lower in HP5.0 and HP10.0 treatment plants. Dry weight of shoot and root were decreased as hydrophilic polymer mixture ratio was increased. They were reduced by 1/4 compared to those of Control treatment plants. In addition, visual value was decreased as hydrophilic polymer mixture ratio was increased. Plants grown in HP1.0, HP2.5, and HP5.0 treatments all survived. However, plants grown in the HP10.0 treatment had the lowest survival rate (56%) after 3 months of growing. These results indicate that the advantage of adding hydrophilic polymer to green roof growing media may greater during dry periods. However, the proper mixture proportion of hydrophilic polymer should be determined according to different characteristics of growing media and plant species.

• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.1-15
• /
• 1989

The seventeen barnyardgrass [Echinochloa crus-galli (L.) Beauv.] accessions, which were collected national-widely in 1986 and selected two times through 1987, were experimented at 1988. To identify the ecological properties of the collected accessions of native barnyardgrass species as a weed, the experiment was conducted with Wagner pots in size of I/500a and under PE film house. 1. Accessions were classified into 5 specific groups in plant type properties by use of data from plant height, number of maximum tillers, erectness, culm length and panicle type, among others. 2. As for species identification, they were clustered into 3 similar groups and 2 individual species by use of data from color, first-glumer type, and erectness. 3. Four groups were identified for elongational properties by plant height of 22 days old seedling, length of culm, panical, leaf length and width, and inter-node and spikelet, among others. 4. Properties on quanititative growth were classified into 4 groups and 1 individual accession corresponding to differential plant height of 22 days old seedling, length of culm, panical, inter-node, leaf-sheath, spikelet, first-glumes length, grain, number of tillers, spike, and grain weight. 5. Due to different daily increasing rate in seedling height, dry weight, number of tillers and ratio in dry weight to plant height, the growth rate properties were clustered into 4 groups and one individual accession. 6. Properties on seedling growth were classified into 4 groups by use of differential date in length and width of first-leaf, plant height, number of tillers, and dry weight of young and medium aged seedling. 7. Responding to heading date, the accessions were classified into 3 groups : temperative sensitive, medium, and short-day length sensitive types, respectively. 8. By integrating of all quanititative and attributable characters, the seventeen accessions were clustered into 4 groups and 2 individual accessions.

• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.140-144
• /
• 1997

This experiment was carried out to investigate the proper planting method of Rehmannia glutinasa Liboschitz. A Chungbuk local cultivar was sown on the seed bed of 200cm with the planting density of 30cm(6 rows) $\times$ 8.5cm(30 rhizome per $\textrm{m}^2$). The experimental design was randomized block design with 3 replications. And the result was summarized as follows. The emergence date of level Planting(control : 0$^{\circ}$) was May 23, but the emergence dates of Oblique planting(45$^{\circ}$) and Upright planting(90$^{\circ}$) treatments were later than the control by 2~4 days. And the leaf length and the ratio of leaf length/leaf width were not significantly different. As compared with the 29.2cm and 10.0mm of the rhizome length and the rhizome diameter of level planting treatment, the rhizome length of Oblique planting treatment was decreased by 3.4cm and 0 mm. The length and diameter of rhizome of the Upright planting treatment was decreased by 2.8cm and 1.0mm. And the order of sugar content was level Planting > Oblique planting > Upright planting. The total yields were decreased by 9% in the Oblique planting and by 15% in the Upright planting compared to 1,203kg/10a in the control, and the commercial yields showed the same tendency. The level planting treatment was found to be most proper for sowing of Rehmannia glutinasa Liboschitz in the middle inland region of Korea.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.26-35
• /
• 2007

We characterized the properties of the fabricated filter with the total internal reflection mirror (TIR) in the rectangular ring resonator and very small multimode interference (MMI) couplers on an InP material platform for photonic integrated circuits. Coupling power in and out of a resonator is increased by using an optimum MMI length of 110 ${\mu}m$ and a width of 9 ${\mu}m$, respectively. The semiconductor optical amplifier with the length of 120 ${\mu}m$ is integrated in the resonator to compensate the loss of the internal waveguide and the TIR mirror. A free spectral range of approximately 2 nm (244 GHz) is observed with an on-off ratio of 13 dB. The curve fitting also yields the power coupled per pass as 42%. To reach critical coupling at this coupling level would require a round trip loss of about 2.4 dB.

• Fashion & Textile Research Journal
• /
• v.12 no.6
• /
• pp.789-795
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a jacket bodice pattern of middle-aged obese men by using the 3D virtual twin and virtual garment simulation system. The results were as follows ; 1. BMI rate of middle-aged males was 28.13 which was equivalent to mild obesity, whereas WHR(W/H ratio from waist to hips) rate was near 1.00 which was highly dangerous against their obesity. In case of middle-aged obese men, the WHR was significantly higher than the entire middle-aged men's average and the section shape in which their thickness was relatively more than width. 2. As a result of appearances evaluation through virtual garment simulation, the cut-off amount of the side seam and the center back was regulated accordingly. Hereby, the final tolerance range was set up at 21.15 cm at the hips, so that the appearances became better and the bilateral distribution of the cross section and space length was formed symmetrically. Especially in case of increasing the cross amount of hems to produce a natural silhouette of the waist-to-hips parts, the ease of buttocks was judged to be moderate, but it turned out that a wavy cross section was made and the silhouette was not good. Thus it was found to be not good that the ease of the hips became excessively increased in proportion as circumference of waist and belly were increased in obesity. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.762-769
• /
• 2012

In order to study the cooking characteristics of four rice cultivars of Seolhyangchal, Baegjinju, Ilpum and Haiami, we investigated the relationship between the textures of cooked rice and their physicochemical properties. Different levels in grain weight. length/width ratio and amylose content were observed among the four rice cultivars. There was no significant difference in the amylopectin chain length distribution among the cultivars. Water absorptions of rice grains during soaking were completed between 30 and 40 min, with Haiami showing the slowest absorption. Significant differences in the viscosity properties of rice flour were found by a Rapid Visco Analyser. Baegjinju with low amylose content had the highest viscosity in paste breakdown. According to the DSC results of rice starches, there were significant differences in the onset, peak and conclusion temperatures of the endothermic peak. Gelatinization enthalpy showed energy content changes between 4.20 and 6.97 J/g, with the lowest change in Haiami. Texture properties of cooked rice were assessed using a Texture Analyzer, which showed that the hardness of cooked rice was decreased with soaking than without soaking. However, this finding was not applicable for Haiami rice.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.135-151
• /
• 1982

In order to investigate the effectiveness of Osmose process for the practical treatment of wood this study has been made using water soluble preservatives such as Malenit and chromated zinc chloride. The results obtained in this investigation are as follows: 1. The penetration of Malenit in sapwood has been observed deeper than that of chromated zinc chloride for all species tested in this investigation. 2. The penetration of preservatives applied in soft wood, ie. Pinus densiflora and Larix leptolepis has been observed better results than that of hard wood, i.e., Quercus accutissima and Carpinus laxiflora. 3. The longer stack covering, despite of preservatives applied and size of wood tested, has given better penetration for all species tested, and the fastest diffusion has been occured in 15 days from they day started. Following after 15 days diffusion had gradualy become slower. 4. The length of time needed for effective penetration has taken 45 days for all species tested, reaching twenty millimeters (20mm) in depth in case of Malnit, that means also more than 50% of penetration into sapwood portion. However it has taken 45 days fer Pinus densiflora and Larix leptolepis, reaching fifteen millimeters (15mm) and 60 days for Quercus accutissima and Carpinus laxiflora, reaching same fifteen millimeters in case of chromated zinc chloride, that means also less than 50% (except 50% for Larix) of penetration into sapwood portion. 5. Deeper penetration of preservatives from the wood surface has been observed in the larger wood than the smaller wood for all species tested, although the penetration ratio between the width of sapwood and the length penetrated has been observed smaller in larger wood than smaller wood. 6. The relation between moisture content of wood and the penetration of preservatives into wood tested has shown the linear regression, that is, the more moisture content brought the deeper penetration. 7. Following the result obtained at this investigation osmose process with Malenit applied has indicated as a useable process for the none pressure treatment of wood.

• Journal of Species Research
• /
• v.6 no.2
• /
• pp.177-180
• /
• 2017

Diploscapter coronatus (Cobb, 1893) Cobb, 1913 was first reported on oriental melon (Cucumis melo vars. makuwa Makino) roots from plastic film houses, Gyeongsangbuk-do, Andong, Korea (latitude $N36^{\circ}33^{\prime}$. longitude $E128^{\circ}29^{\prime}$). Diploscapter coronatus is most similar to D. pachys. Species in the genus Diploscapter have a visibly annulated cuticle. The stoma of D. coronatus is 1.5 times longer than the lip region width. The pharyngeal corpus is clearly separated from the isthmus and the vulva is situated around the mid-body. However, it differed by higher ratio of "a", filiform tail and had relatively blunt labial hooks. The Korean population is well matched and within the range of D. coronatus as described from Iran and Ethiopia in de Man's of L, b, c, c', and V. Female length, however, varied between populations: the Ethiopia population female length is longer than in the Korea population (396.4 vs 427.0) while females in the Iran population are smaller than in the Korea population (396.4 vs 350.0). Nematode size may vary due to environmental conditions such as food sources. The position of excretory pores in the Korean population were shorter 53.9-72.5 than in other populations (67-82 and 70-89). Males were uncommon. Males in the Korean population are smaller than females but larger(356.0) than males in the Indian population (306.0).

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.132-139
• /
• 2011

This study examined the characteristics of radio-frequency/vacuum dried Korean red pine ($Pinus$ $densoflora$) heavy timbers with 250 ${\times}$ 250 mm (S), 300 ${\times}$ 300 mm (L) in cross section and 300 mm in diameter, and 3,600 mm in length, which were subjected to compressive loading after a kerf pretreatment. The following results were obtained : The drying time was short and the drying rate was high in spite of the large cross section of specimens. The moisture gradient inall specimens was gentle in both longitudinal and transverse directions owing to dielectric heating. The shrinkage of the width in the direction perpendicular to was 21 percent ~ 76 percent of that of the thickness of square timbers in the direction parallel to the mechanical pressure. The casehardening for all specimens was very slight because of significantly reduced ratio of the tangential to radial shrinkage of specimens and kerfing. The surface checks somewhat severely occurred although the occurrence extent of the surface checks on the kerfed specimens was slight compared withthat on the control specimen.