• Korean Journal of Environmental Biology
• /
• v.32 no.1
• /
• pp.68-74
• /
• 2014

Scientific study has investigated the body condition differences by habitat characteristics in larvae Korea salamander (Hynobius leechii) from March to April in 2012. To examine the sensitivity of external environment (predation risk), we divided two groups according to habitat characteristic; 1) Permanent pond and 2) Temporary pond. Howere, each larva was measured by head width at the level of the eye (HWE), largest head width (LHW) and snout-vent length, and we calculated the ratio of the head size by dividing HWE/LHW. As a result, larvae were larger in permanent pond group, had a faster growth rate than in temporary pond group. When exposed to the predator, larvae in permanent pond were smaller HWE/LHW than larvae in permanent pond. Therefore, these results indicate larvae in temporary pond more sensitive to the external environment.

• Earthquakes and Structures
• /
• v.16 no.3
• /
• pp.295-310
• /
• 2019

This study attempts to develop new simplified approximate formulas to predict the fundamental natural periods of vibration (T) for bearing wall systems engaged with special reinforced concrete shear walls (RCSW) under seismic loads. Commonly, seismic codes suggested empirical formulas established by regression analysis of measured T for buildings during earthquake motions. These formulas depend on structure type, building height, number, height and length of SW, and ratio of SW area to base area of structure. In this study, a parametric investigation is performed for T of 110 selected models of bearing RCSW systems with varying structural height, configuration of horizontal plans including building width, number and width of bays, presence of middle corridors and core SWs. For this purpose, a 3D non-linear response time history (TH) analysis is implemented using ETABS v16.2.1. New formulas to estimate T are anticipated and compared with those obtained from formulas of IBC 2012 and ASCE/SEI 7-10. Moreover, the study examines responses of an arbitrarily two selected test model of 60 m and 80 m in height with presence of SWs having middle corridors. It is observed that the performance of the tested buildings is different through arising of considerable errors when using codes' formulas for estimating T. Accordingly, using the present proposed formulas exhibits more reasonable and safer design compared to codes' formulas. The results showed that equitable enhancement is promising to improve T formulas approaching enhanced and accurate estimation of T with reliable analysis, design, and evaluation of bearing RCSW systems.

• The Research Journal of the Costume Culture
• /
• v.30 no.2
• /
• pp.281-296
• /
• 2022

This study is designed to compensate for the lack of children's clothing relics from the early 18th century and to reproduce young upper-class girls' costume as hanbokcontent. The shapes and materials of costumes are based on the record of 『Sukjong-silrok』 in 1701 and the characteristics of adult ladie's costume relics in this period, but reproduced as miniatures of these relics as like Joseon children's clothing of another period. The reproduced costumes are formal wear for 3~4 year-old girls, consisting of yeoui [女衣], long unlined skirts, and lined skirts. Sizes were set at a height ratio of approximately 155:95. Yeoui is sam-hoejang-jeogori using pine pollen-colored damask with a grape-squirrel pattern and a purple damask with flower-treasure pattern. The full length of yeoui is 24.5cm. It has a square-dangko outer collar with square inner collar. The long unlined skirt is a six-width overskirt that is 82cm long, made with lotus patterned sa. The lined skirt is a five-width skirt that is 61.3cm made with flower-treasure patterned red damask and ju. Several long pleats on both sides of these two skirts have been omitted. The result provides meaningful content for children's clothing in the early 18^th century and will be used as costume for an educational trial performance.

• Korean Journal of Agricultural Science
• /
• v.49 no.2
• /
• pp.367-377
• /
• 2022

The purpose of this study was to analyze the deterioration of trail conditions and to obtain information for desirable maintenance and restoration of a trail in Deogyusan National Park. The physical characteristics of a trail were surveyed at a total of 412 sites over 79.8 km length. The average trail degree and width were found to be 14.31° and 1.60 m, respectively, while the average bare trail width was 1.40 m and the average maxim trail depth was 5.66 cm. Major deterioration types of trail were trail deepening (36.6%), rock exposure (33.9%), and root exposure (12.5%) in order of frequency. Deterioration classes of the trail were 0.626 km (0.8%), 3.110 km (3.9%) and 8.935 km (11.2%) for heavily, moderately, and lightly deteriorated, respectively, with a deterioration rate of 12.671 km (15.9%). Compared to other national parks, the ratio damaged trail to the total trail was 15.9%, which is slightly higher than other, including Jirisan National Park 9.6% (2019), Bukhansan National Park 13.6% (2019), Sokrisan National Park 11.7% (2019), Chiaksan National Park 12.3% (2015), and Woraksan National Park 10.5% (2015). The section of trail in Deokyusan National Park where the damage grade is analyzed as "Heavy" should therefore be restored in consideration of the field conditions. In particular, the damage status of the trail is expected to be greatly improved when the trail surface maintenance level is restored.

• Korean Journal of Breeding Science
• /
• v.41 no.1
• /
• pp.16-24
• /
• 2009

Although leaf characters are important in soybean [Glycin max (L.) Merr.] breeding and development of cultural methods, very little information has been reported. The objectives of this study were to evaluate and analyze the relationships among leaf characters and suggest possible classification criteria for cultivating and wild (Glycin soja Sieb. & Zucc.) soybeans. Total of 94 cultivating and 91 wild soybean accessions from the Soybean Germplasm Laboratory of Chungbuk National University were used for this study. Central leaflet of the second leaf from the top of the plant was selected to measure leaf characters. Average leaf length, leaf width, leaf area, leaf shape index (LSI) of cultivating and wild soybeans were 12.3$\pm$1.25 cm and 6.6$\pm$1.35 cm, 6.8$\pm$1.241 cm and 2.9$\pm$0.92 cm, 55.6$\pm$15.75 $cm^2$ and 14.3$\pm$7.83 $cm^2$, and 1.9$\pm$0.38 and 2.4$\pm$0.53, respectively. Based on LSI, three categories of leaf shape, i.e., oval, ovate and lanceolate, were defined as LIS$\leq$2.0, LSI 2.1~3.0 and 3.1$\leq$LSI, respectively. Percentage of oval, ovate and lanceolate leaf types among cultivating and wild soybean accessions were 78.7%, 17.0% and 4.3 %, and 40%, 15.4% and 4.4%, respectively. Based on leaf length, three categories for cultivating, i.e. short leaf ($\leq$11.0 cm), intermediate (11.1~13.0 cm), and long (13.1 cm$\leq$), and four categories, i.e. short ($\leq$5.0 cm), intermediate (5.1~7.0 cm), long (7.0~9.0 cm), and very long (9.1 cm$\leq$) for wild soybeans were defined. Short, intermediate and long leaf types were about 1/3, 1/2 and 1/6, respectively, in cultivating soybeans, and 15.4%, 40.7% and 39.5%, plus 4.4% of very long leaf type in wild soybean. Cultivating and wild soybeans had leaf thickness, leaf area ratio (LAR), angle and petiol length of 0.25$\pm$0.054 mm and 0.14$\pm$0.032 mm, 40.1$\pm$8.22 and 53.7$\pm$12.02, $37.6{\pm}5.89^{\circ}$ and $54.6{\pm}10.77^{\circ}$, and 23.9$\pm$5.89 cm and 5.9$\pm$2.33 cm, respectively. There were highly significant positive correlations between leaf length and leaf width, and negative correlation between LSI and leaf width both in cultivating and wild soybeans. Although leaf area showed significant correlations with leaf length, leaf width and LIS in cultivating soybeans, wild soybeans showed no significant relationships among these characters. In general, soybeans with oval, ovate and lanceolate leaves were significantly different in leaf width and thickness. Cultivating soybean with oval leaf had greater leaf area, while wild soybeans with oval or ovate leaf had longer petiol than with lanceolate leaf.

• Journal of Oral Medicine and Pain
• /
• v.39 no.2
• /
• pp.69-77
• /
• 2014

Purpose: It aims to verify the applicability of existing age estimation methods derived from data of foreign population groups to Korean population groups. Moreover it is to suggest a new way applicable to practical age estimation on the basis of newly calculated regression formulae from data of Korean population groups and develop a subsidiarily applicable method to the existing method. Methods: Ratio of pulp cavity to dental crown was calculated by measuring the height and width of dental crowns and pulp cavities at the cervical line from 4,034 first and second upper molars, first and second upper premolars, first and second lower molars and first and second lower premolars on both left and right sides of 400 patients who had been treated in Dental Hospital of Yonsei University College of Dentistry, and regression equations were derived from the values of the ratio. Results: The equation with correlation coefficients the highest among females was as follows: age=$107.96-75.684{\times}{\sharp}17$ TCHI-$53.741{\times}{\sharp}26$ TCVI-$40.664{\times}{\sharp}45$ TCVI-$56.307{\times}{\sharp}46$ TCVI. Randomized anohter Korean female subjects (n=20) are applicated to the new equation. Mean of error of estimate is 10.322 years, standard deviation is 12.852 years. Minimum of error of estimate is 1.018 years, maximum is 21.365 years Conclusions: The error range of age estimation was found to be slightly wider when the existing regression formulae of Drusini were applied to Korean population groups. Also age estimation in females using the ratio of pulp cavity to dental crown measured with the length and width of dental crowns and pulp cavities from maxillomandibular molars was observed to have the highest reliability in the research. However, we consider that advanced equations of regression are needed to apply to both molars and premolars of males and females in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1579-1587
• /
• 1999

Bias-dependent noise models of $0.2\mu\textrm{m}$ gate length P-HEMT's which are scalable with gate width are proposed. To predict S-parameters of the P-HEMT's the intrinsic parameters except for $\tau$ subtracted the offsets introduced in this paper are normalized to the gate width and then scaled. The small-signal model parameters are expressed as fitting functions of the drain current to $\textrm{I}_{dss}$ ratio and gate width. In addition, to estimate accurately noise parameters the noise temperature $\textrm{T}_{g}$ of the intrinsic resistance, the equivalent noise conductance $\textrm{G}_{ni}$ of the gate current noise source, and the equivalent noise conductance $\textrm{G}_{no}$ of the drain current noise source are adopted as the noise model parameters. The extracted values of $\textrm{T}_{g}$ are nearly independent of drain current and gate width and their average is around the ambient temperature. The extracted values of $\textrm{G}_{ni}$ are small enough to be neglected to the circuit characteristics. From the comparison of the noise model with only $\textrm{G}_{no}$ and that having $\textrm{T}_{g}$, $\textrm{G}_{ni}$ and $\textrm{G}_{no}$ to the measured data it is fund that even the former model is in good agreement with the measured noise parameters. Thus, from a practical point of view the noise model having only the drain current noise source is confirmed as a scalable bias-dependent model.

• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.617-626
• /
• 2020

This study investigates changes of bifurcation discharge ratio, flow velocity distributions and characteristics of separation zone due to variation of bifurcation angle by using TELEMAC-2D model. When the bifurcation angle is reduced from 90° to 45° without changing the boundary conditions, the bifurcation discharge ratio increased by 1.5 times from 0.523 to 0.785 because of increasing the radius of curvatures, the inertia force of the downstream flow, and the pressure gradient by the downstream boundary conditions. The bifurcation discharge ratio increases non-linearly whenever the bifurcation angle decreases by 15° intervals from 90° to 45° in flow with the upstream Froude number of 0.45 to 0.74. In flow with a maximum Froude number of 0.74, the rate of increase for bifurcation discharge ratio is 31.1% and the minimum value. When the Froude number is 0.58, the bifurcation discharge ratio is 0.7 or less, and the maximum rate of increase for that ratio is 53.5%. As the upstream Froude number decreases less than 0.58, the bifurcation discharge ratio exceeds 0.7, and the rate of increase decreases. When the upstream Froude number is 0.4 higher, the dimensionless width and length changing ratio of the separation zone are about 2.56 and 5.5 times higher than in 0.4 or less.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.334-342
• /
• 2016

In order to evaluate the modified installation methods of roof ventilation devices, derived from the previous experiment ('investigation into the optimum capacity of roof ventilation devices and their deployment'), the conventional and modified (improved) roof ventilation systems were installed in the single-span plastic greenhouse for growing oriental melons. The roof vents ($60{\varphi}$) and roof fans (maximum air capacity of $38m^3/min$) were installed in the spacing of 15m (FT, modified 'side vent+roof fan' ventilation) and 6m (TT, modified 'side vent+roof vent' ventilation) respectively on the roof of greenhouses for the modified roof ventilation treatments, and 20m (FC, conventional 'side vent+roof fan' ventilation) and 8m (TC, conventional 'side vent+roof vent' ventilation) for the conventional ones. The stem diameter, leaf blade lengh, petiole length, and leaf width were lower in the FT and TT treatments than those in the conventional treatments, FC and TC. Although the fruit weight and total yields were slightly lower in the FT and TT treatments, the marketable fruit ratio (%) were higher, as a result of increased fruiting ratio (%) in these treatments, than those of FC and TC. The marketable yields (kg/10a) in the FT and TT treatments were 8,391 kg/10a and 7,283 kg/10a, which were respectively 661 kg/10a and 487 kg/10a higher than those in the treatments of FC and TC. The modified installation methods of roof fan resulted in production of more female flowers and lower fruit drop ratio (%) compared to conventional meathods. In the treatment of the conventional ventilation with roof vent, the fruit weight, fruit length & width, and flesh thickness were higher than in other treatments, but there were no significant differences in the fruit width and flesh thickness among the treatments.

• Korean Journal of Plant Resources
• /
• v.9 no.3
• /
• pp.279-284
• /
• 1996

Effects of varieties and cutting lengths of Chinense Martrimony Vine on the growth characteristics and the yield of green shoot were investigated in order to obtain the basic data The Yuseong-2 was observed higher in the number of green shoot per plant, of green shoot, but smaller in the length and the width of leaves than those of Cheongyang native. The number of green shoot was decreased in longer cutting length, but the other growth characteristics were increased. The dry weight of green shoot was $1.01{\sim}0.03g$ and the ratio of stem to leaf in green shoot was higher in leaf than that of stem, and the ratio was 46 : 54. The dry yield of green shoot was $108{\sim}204kg/10a$ in Cheongyang native and $215{\sim}363kg/10a$ Yuseong-2 and the dry yield of green shoot of Yuseong-2 may be expected in this planting year. Each growth characteristic of varieties was highly positive correlation with the yield except the number of green shoot of Cheongyang native. The number of green shoot of Yuseong-2 was nagative correlation with each growth characteristic and the yield except the number of total leaves per plant.