• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.57-79
• /
• 1993

Chuncheon nephrite, which was formed by the polymetasomatic alteration of dolomitic marble, can be classified into pale green, green, dark green, and grey types on the basis of their occurrence, mineralogical and textural characteristics. The nephrites consist obiefly of fibrous or hairlike(length/width ratio>10) cryptocrystalline(crystal width < $2{\mu}m$) tremolite, and include less amounts of micro-crystalline diopside, calcite, clinochlore, and sphene as impurities. The oriented and rather curved crystal aggregate, of nephritic tremolite are densely interwoven, resulting in a massive-fibrous texture which may explain the characteristic toughness of nephritic jade. The characteristic greenish color of the nephrite may be preferably related to Fe rather than Cr and Ni. However, the variation of color and tint in the Chuncheon nephrite also depends on the mineralogical and textural differences such as crystallinity, texture, and impurities. The chemical composition of the nephritic tremolite is not stoichiometric and rather dispersed especially in the abundances of Al, Mg, and Ca. Al content and Mg/Ca ratio for the nephritic tremolite are slightly increased with deepening in greenish color of the nephrite. Fe content in the nephritic tremolite is generally very low, but comparatively richer in the dark green nephrite. In nephritic tremolite, wide-chain pyriboles are irregularly intervened between normal double chains, forming a chain-width disorder. Most nephritic tremolites in the Chuncheon nephrite show various type of chain-width defects such as triple chain(jimthompsonite), quintuple chain (chesterite), or sometimes quadruple chain in HRTEM observations. The degree of chain-width disorder in the nephritic tremolite tends to increase with deepening in greenish color. Triple chain is the most common type, and quadruple chain is rarely observed only in the grey nephrite. The presence of pyribole structure in the nephritic tremolite is closely related to the increase of Al content and Mg/Ca ratio, a rather dispersive chemical composition, a decrease of relative intensity in (001) XRD reflection, and an increase in b axis dimension of unit cell. In addition, the degree and variation of chain-width disorder with nephrite types may support that an increase of metastability was formed by a rapid diffusion of Mg-rich fluid during the nephrite formation.

• Advances in nano research
• /
• v.10 no.2
• /
• pp.115-128
• /
• 2021

In this article, free vibration behavior of electro-magneto-thermo sandwich Timoshenko beam made of porous core and Graphene Platelet Reinforced Composite (GPLRC) in a thermal environment is investigated. The governing equations of motion are derived by using the modified strain gradient theory for micro structures and Hamilton's principle. The magneto electro are under linear function along the thickness that contains magnetic and electric constant potentials and a cosine function. The effects of material length scale parameters, temperature change, various distributions of porous, different distributions of graphene platelets and thickness ratio on the natural frequency of Timoshenko beam are analyzed. The results show that an increase in aspect ratio, the temperature change, and the thickness of GPL leads to reduce the natural frequency; while vice versa for porous coefficient, volume fractions and length of GPL. Moreover, the effect of different size-dependent theories such as CT, MCST and MSGT on the natural frequency is investigated. It reveals that MSGT and CT have most and lowest values of natural frequency, respectively, because MSGT leads to increase the stiffness of micro Timoshenko sandwich beam by considering three material length scale parameters. It is seen that by increasing porosity coefficient, the natural frequency increases because both stiffness and mass matrices decreases, but the effect of reduction of mass matrix is more than stiffness matrix. Considering the piezo magneto-electric layers lead to enhance the stiffness of a micro beam, thus the natural frequency increases. It can be seen that with increasing of the value of WGPL, the stiffness of microbeam increases. As a result, the value of natural frequency enhances. It is shown that in hc/h = 0.7, the natural frequency for WGPL = 0.05 is 8% and 14% less than its for WGPL = 0.06 and WGPL = 0.07, respectively. The results show that with an increment in the length and width of GPLs, the natural frequency increases because the stiffness of micro structures enhances and vice versa for thickness of GPLs. It can be seen that the natural frequency for aGPL = 25 ㎛ and hc/h = 0.6 is 0.3% and 1% more than the one for aGPL = 5 ㎛ and aGPL = 1 ㎛, respectively.

• Journal of Sasang Constitutional Medicine
• /
• v.26 no.4
• /
• pp.350-364
• /
• 2014

Objectives This study was aimed to find the significant features of face form according to the Taeeumin and Soyangin by analyzing the three-dimensional face information data. Also, making standard face of the Taeeumin and Soyangin was an object of this study. Methods We collected three-dimensional face data of patients aged between 20~45 years old diagnosed by a specialist of Sasang constitutional medicine. The data were collected using a 3D scanner, Morpheus 3D(Morpheus Corporation, KOREA). Extracting a face feature point total of 64, was set to 332 pieces(height, angle, ratio, etc.) of each variable between feature points. ANOVA test were used to compare the characteristics of subjects according to the Taeeumin and Soyangin. Results When not to consider gender, the Taeeumin and Soyangin were different from the 18 items(3 items in the ear, 9 items in the eye, 1 item in the nose, 1 item in the mouth, 4 items in the jaw). When to consider gender, the Taeeumin and Soyangin men were different from the 6 items(1 item in the ear, 2 items in the nose, 3 items in the face). And the Taeeumin and Soyangin women were different from 17 items(1 item in the ear, 10 items in the eye, 2 items in the nose, 1 item in the mouth, 3 items in the face). Conclusions These results show Taeeumin's face(both men and women) width of the right and left is larger than the length of the top and bottom. Compared to men of Soyangin, men of Taeeumin has greater wings of the nose. Compared to women of Soyangin, women of Taeeumin has longer length of the eye. Soyangin's face(both men and women) length of the top and bottom is larger than the width of the right and left. Compared to men of Taeeumin, men of Soyangin has smaller wings of the nose. Compared to women of Taeeumin, women of Soyangin has more stereoscopic facial features at the top and bottom of the lateral face. Also, by accumulating three-dimensional face data, this study modeled the standard facial features by Taeeumin and Soyangin. These results may be helpful in the development of Sasang constitutional diagnostics utilizing the characteristics of the facial form at later.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.2
• /
• pp.59-68
• /
• 1984

The Purpose of this study was to investigate the effect of the change in misture content on some physical properties of grains, and some relations amont the properties. Materials included ere rough rice, brown rice, barley and wheat with the range of moisture content of 6~26 percent, 7~25 percent, 10~24 percent and 6~22 percent, respectively. Kernel dimension, sphericity, kernel weight, and volume were included as the physical properties of the grains. The results obtained are summarized as follows; 1. The ratio of grain length to the thickness was in the range of 3.59~4.16 for rough rice(Indica type), 2.98~3.27 for rough rice(Japonica type), 3.25 for brown rice (I.T.), 2.14~2.38 for brown rice(J.T.), 2.92~3.13 for barley and 2.10~2.21 for wheat, respectively. 2. The sphericity was found to be 42 percent for rough rice(I.T.), 48 percent for rough rice(J.T.), 52 percent for brown rice(I.T.), 62 percent for brown rice(J.T.), 45 percent for barley and 61 percent for wheat, respectively. 3. The kernel weight of grains was linealy increased with the increase of moisture content. At a specified moisture centent of 14 percent, the kernel weight was shown to be in the range of 4.72${\times}10^{-5}$~3.58${\times}10^{-5}$kg for wheat, 3.60${\times}10^{-5}$~3.12${\times}10^{-5}$kg for barley, 2.80${\times}10^{-5}$~2.35${\times}10^{-5}$kg for rough rice, and 2.24${\times}10^{-5}$~1.82${\times}10^{-5}$kg for brown rice, respectively. 4. The kernel volume was linearly increased with increase of moisture content. The rate of increase was significantly low for rough rice in comparison with the remaining grains. The kernel volume, at a specified moisture content of 14 percent, was in the range of 3.51${\times}10^{-8}$~2.76${\times}10^{-8}m^3$ for wheat, 2.84${\times}10^{-8}$~2.43${\times}10^{-8}m^3$ for barley, 2.93${\times}10^{-8}$~1.97${\times}10^{-8}m^3$ for rough rice, and 1.61${\times}10^{-8}$~1.29${\times}10^{-8}m^3$ for brown rice, respectively. 5. The kernel volume of grains was found to be related to the length, width, thickness and kernel weight as a exponential function. The kernel volume was shown to have correlation coefficient to the length factor rough rice and barley which were of low sphericity, while the width factor was predominant for brown rice and wheat which was of high sphericity.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.1
• /
• pp.6-11
• /
• 1989

Some distinctive defects in the conventional stow net were examined and presented in the previous report of this series. To find out the more effective gear by correcting the defects, the authors carried out another experiment by using a newly designed gear. 1. Special features of the newly designed gear are: (1) stretched width of front end on top, bottom and side panel are decreased 20%, on the other hand, the frank of the panels are increased 10% compared with the conventional gear. Front end of top and bottom panels are bias cutten up to 20% of the length of panels. (2) Length of the head rope and ground rope are shortened 6% by changing of the shape of the top and bottom panels. (3) Lacing lines are attached to four longitudinal seaming lines with suitable hanging ratio. (4) Stretched height of the shearing device were shortened 17%, and the buoyancy on top of the device were increased 20%. (5) Length of the biforked pendants were arranged to be shorter on top-most and bottom-most ones, and loner on middle ones. 2. The observed result can be expressed as (1) Wrinkles in the front end of top panels are removed and fringe line of panels become smooth. (2) Opening height of mouth is observed 3% higher than that of the conventional gear. (3) Opening width is 1.5 to 1.6 times wider than that of the conventional gear. (4) Hydrodynamic resistance is decreased 10%-17%.

• Journal of Korean Society of Forest Science
• /
• v.22 no.1
• /
• pp.49-62
• /
• 1974

1. In the comparison of survival ratio among three different methods(bark graft, veneer graft, root graft), bark graft showed the highest survival ratio and root graft was the lowest. It was shown to be significant at the level of 5% in the analysis of variance for the results. It was able to be supposed that one of the main causes for the results was the different amounts of ferric tannic acid which was formated owing to the reaction of grafting knife with tannic acid oozing from cutting faces of the tree. In juvenile tissue graft, the survival ratio of inverted radicle graft was a little higher than that of juvenile stem graft, but there was no significant difference between two methods in analysis of variance. 2. The most hairs of chestnut tree leaves were recognized as stellates on the most part of leaves except for venation. The number of rays in the stellates was ranged from 4 to 8 generally. It was shown to be highly significant differences at the level of 1% among the each race growing at the similar environmental condition in the length of ray and the distributed ratio of the stellates having different ray number. 3. Excepting for the basal width of serration there were no significant differences between $Imakita_1$, $Imakita_2$ as well as between $Teteuchi_1$, $Teteuchi_2$ at the each point of experimental items in this study. Such results made this study more useful. 4. Among the races that were growing in the similar environmental condition, there were highly significant differences at the level of 1% in the length and the width of serration. 5. The rolling of hair, the angle of serration from the leaf margin, the existence of lateral vein in the serration, the intrusion of main vein into the serration and the width of main vein were observed to be somewhat useful as the subsidiary methods for the identification of chestnut races.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.163-169
• /
• 2022

This study was conducted to examine an alternative cultivating method that uses coir substrates in a hydroponically cultured system. Three treatment conditions were applied with one-layer substrate (10 cm height) with a coir chip and dust ratio of 5:5 (Treatment A), two-layer coir substrate (20 cm height) with a coir chip and dust ratio of 5:5 (Treatment B), one-layer coir substrate (15 cm height) with a coir chip and dust ratio of 7:3 (Treatment C). The control condition was a plastic container filled with a coir chip and dust ratio of 5:5. Various criteria were measured and compared between the treatments and the control. The yield of strawberry was smaller in the control than in the treatments. No significant difference in growth characteristic was found in the height treatments of the coir substrates. The net photosynthetic rate of the treatments was 14.68-15.76 µmol CO₂·m^-2·s^-1. This does not show a statistically significant difference. The root activity was better in treatment B and C than in treatment A and the control. The length and width of leaves were measured as 4.04-4.13 cm and 3.26-3.34 cm. These results are not statistically significant. The leaf length and width ratio was 1.27 in the control and 1.24 in the treatments. The findings show that no statistically significant benefit was found when utilizing coir substrates with different height treatments in the hydroponic culture system. However, the harvested fruit per plant weights 72.38 g in treatment A and 48.69 g in treatment C. The number of harvested fruit was least in treatment C in which a coir chip and dust ratio of 7:3 was applied. Therefore, further research is needed to examine how the chip and dust ratio in coir substrate affects growth characteristics.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.132-140
• /
• 2023

In this study, a total of 21 parts of the head, carapace, and plastron of 21 tortoises were examined to investigate the characteristics of male and female sexual dimorphism of the Reeve's turtle (Mauremys reevesii), a natural monument in Korea. The ratio values of a total of 19 areas were derived from Head Length (HL) and Carapace Length (CL). As a result of comparing the ratio values, it was found that male tortoises had larger head length, head width, and head height than females compared to the size of the carapace. Since females grow eggs inside the body through internal fertilization after mating, female carapaces are judged to be larger than males overall. As a result of statistical analysis of the ratio values of the measured values, Plastron Length (PL), Bridge Length (BL), Gular Length (GL), Interhumeral Length (IH), Interanal Length (IAN), Femoral-Anal seam (FA) and Head Height (HH) showed statistically significant differences. Statistically significant in the part of the plastron, it is judged that the tortoise acts directly on each deck of the plastron as it grows. In addition, the head size of male tortoises was smaller than that of females, but it was found to be larger in proportion. It is considered that the tortoise has a rather large head compared to the body due to the male's habit of shaking his head and courtship behavior before mating. This study, we were able to identify the characteristics of sexual dimorphism in Reeve's turtle. However, since most of them were rescued, it was not possible to accurately determine habitat and age. In the future, if additional studies are conducted on individuals with clear habitats and ages, it is expected that the characteristics of the physical differences that develop as they grow can be identified.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.517-523
• /
• 2000

Nasopharyngeal closure is a sphincter mechanism between the activities of the soft palate, lateral pharyngeal wall and the posterior pharyngeal wall, which divides the oral cavity and the nasal cavity. It participates in physiological activities such as swallowing, breathing and pronunciation. In case of an error in this mechanism, it is called a nasopharyngeal incompetence. The causes of this error are defects in (1) length, function, posture of the soft palate (2) depth and width of the nasopharynx, (3) activity of the posterior and lateral pharyngeal wall. The purpose of this study is to analyze the nasopharynx of cleft palate patients using lateral cephalograms and at the same time, evaluate the degree of hypernasality of each vowels to find its relationship with nasopharyngeal incompetence. The following results were obtained: 1. The length of the soft palate was markedly short than normal. 2. The adequate ratio was smaller than the normal value. 3. As the adequate ratio decreased, when articulating vowels, anatomic mVPI increased. 4. When articulating each vowels, anatomic VPI was in proportion with the degree of hypernasality. 5. The degree of hypernasality was greater in high vowels(/i/, /u/) than low vowel(/a/). From the above results, it can be concluded that in cleft palate patients, lateral cephalograms can be used effectively in diagnosing and evaluating nasopharyngeal incompetence. The anatomic structure of the nasopharynx has close relation to the degree of hypernasality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3495-3501
• /
• 2013

The cross-sections of continuous multi-span beams are sometimes suddenly increased or stepped at the interior supports of continuous beams to resist high negative moments. This paper investigates inelastic lateral-torsional buckling of monosymmetric stepped I-beams subjected to pure bending. A three-dimensional finite-element program ABAQUS and a regression program were used to analytically develop new design equation. The flange thickness ratio, flange width ratio and stepped length ratio were considered as parameters of this study. The combined effects of residual stresses and geometric imperfection on inelastic lateral-torsional buckling of beams are considered. The proposed solution can be easily used to calculation for inelastic lateral torsional buckling strengths of monosymmetric beams with doubly stepped cross sections and to develop new design equations for inelastic lateral-torsional buckling resistances of stepped beams.