• 한국작물학회지
• /
• 제43권4호
• /
• pp.250-253
• /
• 1998

Somaclonal variation was observed in the field on doubled haploid plants derived from single pollen of a rice cultivar "Hwaseongbyeo". The variations of seven quantitative traits including plant height and one qualitative trait (pubescence) in 436 lines ($R_2$ generation) were analyzed. The number of lines which fell beyond the boundaries of the 95% confidence intervals of the check variety, Hwaseongbyeo was checked for each quantitative trait, and of those fertility showed the highest variation frequency (85.6%), followed by plant height (77.5%), flag leaf length (66.5%), grains per panicle (42.2%), days to heading (34.5%), panicle length (30.7%) and panicles per hill (22.7%). And the variations of quantitative traits except days to flowering appeared to move in the negative direction compared to "Hwaseongbyeo". Variability within lines was also observed for quantitative and qualitative traits. Twenty-nine $R_2$ lines (7%) segregated for pubescence and 130 $R_2$ lines (30%) showed variation with regard to fertility. This suggests that mutations usually occur before diploidization. Twenty-nine $R_2$ lines representing a wide spectrum of variation were chosen for RAPD analysis. The number of lines showing DNA polymorphism compared to Hwaseongbyeo ranged 0 from to 10 according to the primer used and this seems to indicate that specific loci have highly mutable genomic site.utable genomic site.

• 한국동물학회지
• /
• 제31권3호
• /
• pp.218-224
• /
• 1988

Drosophila melanogaster의 세계 14지역 계통으로부터 mitochondrial DNA(mtDNA)를 추출하여, 제한 요소에 의하여 mtDNA종내 변이를 조사하였다. 그 결과, site variation(Hpall와 Haelll 및 Seal효소)과 length variation(최대550bp)이 나타났다. 또한 6종류(Ml, M2, M3, M4, M6 및 M7)의 mtDNA genotype이 검출되었으며, 종내 평균 염기 치환율은 1.88%로써 낮은 지역 분화(low divergence)를 나타내었다. 그러나 일본의 Ogasawara계통의 M5 type은 본 연구에서는 검출되지않았다. 이처럼 지역 계통간의 낮은 지역 분화는 세계14지역 계통의 D. melanogaster가 최근에 소수의 개체로부터 확산되었기 때문에 집단전체에 아직 충분한 mtDNA변이가 축적되지 않았거나 혹은 지리적 격리가 충분함에도 불구하고 지역 계통간에 빈번한 migration이 일어났기 때문에 mtDNA의 지역 분화가 방해되지않은 것으로 추측된다.

• 복식문화연구
• /
• 제29권3호
• /
• pp.388-405
• /
• 2021

This study classifies the compositional methods of power shoulder jackets from 1980 to the present. It analyzes the relevance of jacket details according to how the power shoulder changes and its compositional methods by era. The research subdivides shoulder compositional techniques into seven, based on shoulder variation, sleeve variation, and the body and sleeve combination. The researcher investigates the frequency and trends of composing shoulders and analyzes details pertaining to the silhouette, jacket length, collar shape, and front closure. The most common method of shoulder composition is an angular shoulder variation. The others are a rounded shoulder variation, puffed sleeve, sleeve variation using pattern incision, raglan and kimono sleeves, and a shoulder variation that expanded the angle and width. The frequency differs slightly for each era. The relationship between shoulder compositional methods and details of power shoulder jackets is statistically significant, showing period-related differences. The homogeneity analysis results reveal that the shoulder composition of power shoulder jackets, the times, and details fall into distinct groups. This analysis shows that the silhouette, length, collar, and front closure of the power shoulder jacket differ depending on the power shoulder's compositional methods. Moreover, the shape of the power shoulder jacket is distinctly different. One can use this data to help develop the power shoulder jacket design by reflecting the details of shoulder compositional methods and changing trends over time.

• 보건행정학회지
• /
• 제16권2호
• /
• pp.77-95
• /
• 2006

The present study was conducted to examine the degree of variation in length-of-stay (LOS) among health care institutions participating in 17 diagnosis-related groups (DRGs) payment system and to find out hospital characteristics affecting the variation. Electronic medical claims data for treatments of severity classification '0' of 17 DRGs provided for two $years(2003{\sim}2004)$ were collected. For each DRG, the degree of variation in average LOS among health care institutions were analyzed using the random effect model. For DRGs showing significant differences in LOS, multiple regression analyses were performed to find out factors associated with LOS. Significant variations in LOS were observed 9 DRGs including unilateral/bilateral lens procedures, adult/child tonsilectomy, other anal procedures, bilateral adult/child herniorraphy, unilateral child herniorraphy, and hysterectomy, and hysterectomy using laparoscopic procedure. Among the 9 DRGs, five DRGs were selected to investigate the factors explaining for the variation. It was observed that the location of institution was significant predictors for all five DRGs. Within the same DRGs, LOS was significantly shorter among the institutions located in Seoul than those in other areas. As compared to clinics, hospitals and general hospitals/tertiary care institutions showed significantly longer LOS for DRGs of lens procedures, tonsilectomy, and other anal procedures. It is recommended that the institutions located in other than Seoul area benchmark the strategies of the institution in Seoul in efficiently managing LOS. Also, significant variation within the same severity classification such as other anal procedures implies the imminent need for improvement of patient classification system.

• 인터넷정보학회논문지
• /
• 제8권5호
• /
• pp.117-123
• /
• 2007

전방위 렌즈(Catadioptric mirror)는 전방위 감시를 위해 널리 사용되고 있다. 대부분의 전방위 렌즈에서의 단점은 전방위 렌즈를 통하여 획득한 영상의 해상도가 위치에 따라 일정하지 않다는데 있다. 본 논문에서 사용한 등거리 전방위 렌즈는 이러한 문제를 해결할 수 있도록 설계된 렌즈이다. 실제 등거리 전방위 렌즈를 통한 거리 계산 시 오류의 원인으로는 카메라 영상 센서와 전방위 렌즈와의 축의 어긋남, 설계 시 가정한 focal length의 변화 등을 들 수 있는데 이 중 focal length의 변화는 기구의 정확한 제작으로 해결할 수 없는 문제이다. 본 논문에서는 이러한 focal length의 변화에 대처하기 위하여 focal length를 수정하는 방법을 제안한다. 영상 정합을 통해 임의로 선정된 두 개의 object points에 대한 반대편 스테레오 영상에서 대응점을 찾은 후 이들 화소의 원점에서의 거리를 사용하여 경계에 해당하는 화소의 위치를 찾는다. 이렇게 측정된 경계의 위치가 미리 계산된 경계화소의 위치와 다를 경우 제안한 방법으로 focal length의 값을 수정한다. 제안한 방법은 매우 간단한 계산만으로 기존의 반복적 연산을 통해 수행한 focal length 수정 방법과 유사한 성능을 보인다.

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.17-23
• /
• 2005

The switching characteristics of MOS-Controlled Thyristor(MCT) is studied with variation of the channel length and impurity concentration in ON and OFF FET channel. The proposed MCT power device has the lateral structure and P-epitaxial layer in substrate. Two dimensional MEDICI simulator and PSPICE simulator are used to study the latch-up current and forward voltage-drop from the characteristics of I-V and the switching characteristics with variation of channel length and impurity concentration in P and N channel. The channel length and N impurity concentration of the proposed MCT power device show the strong affect on the transient characteristics of current and power. The N channel length affects only on the OFF characteristics of power and anode current, while the N doping concentration in P channel affects on the ON and OFF characteristics.

• 한국연소학회지
• /
• 제21권2호
• /
• pp.29-37
• /
• 2016

This study described the experimental investigations of combustion instability in a model gas turbine combustor. Strong coupling between pressure oscillations and unsteady heat release excites a self-sustained acoustic wave, which results in a loud and annoyed sound, and may also lead to a structural damage to the combustion system. In this study, in order to examine the combustion instability phenomenon of a dual swirling combustor configuration, the information of heat release and pressure fluctuation period with respect to the variation in both thermal power and combustor length was collected experimentally. As a result, the fundamental acoustic frequency turned out to increase with the increasing thermal power without respect to the combustor length. The frequency response to the combustor length was found to have two distinct regimes. In a higher power regime the frequency significantly decreases with the combustor length, as it is expected from the resonance of gas column. However, in a lower power regime it is almost insensitive to the combustor length. This insensitive response might be a result of the beating phenomenon between the interacting pilot and main flames with different periods.

• 한국산림과학회지
• /
• 제77권2호
• /
• pp.235-241
• /
• 1988

경남(慶南) 산청군(山淸郡) 시천면(矢川面) 소재(所在) 지리산(智異山) 일대(一帶)에서 재배(栽培)되고 있는 왕대 임분(林分)에 대(對)하여 해발고(海拔高)에 따른 간형질(桿形質) 변이(變異)를 분석(分析) 한 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 해발고(海拔高) 400m의 평균기온(平均氣溫)은 약(約)$12^{\circ}C$로서 수평적(水平的)인 왕대 분포지역(分布地域)의 기온(氣温)과 일치(一致)하였다. 해발고별(海拔高別) 간고(稈高), 직경(直徑), 지하고(枝下高) 등(等)에 있어서 평균치(平均値) 출현율(出現率)의 범위(範囲)는 400m까지는 넓었으나 500m이상(以上)에서는 매우 좁게 나타났다. 지하고(枝下高)에 대(對)한 간고(稈高)의 형상비(形狀比)에 있어서 출현율(出現率)의 범위(範囲)는 해발고(海拔高) 모두 동일(同一)한 경향(傾向)이었다. 변이계수(變異係數)에 있어서 간고(稈高), 직경(直徑), 지하고(枝下高)/간고(稈高)의 형상비(形狀比)는 15~25%의 범위(範囲)를 나타내었으나 지하고(枝下高)에 있어서는 25%이상(以上)의 큰 폭(幅)을 나타내었다. 해발고(海拔高)에 따른 간형질(稈形質)은 모두 1% 수준(水準)에서 유의성(有意性)이 인정(認定)되었다. 간형질(稈形質)에 대(對)한 Duncan의 다중검정(多重檢定)을 한 결과(結果), 해발고(海拔高) 400m이하(以下)와 500m이상(以上)으로 구분(區分)되었다. 해발고(海拔高)에 따른 간형질(稈形質) 상호간(相互間)에는 대부분(大部分) 정(正)의 상관(相關)을 보였다. 이상(以上)의 결과(結果)에서 지리산(智異山) 일대(一帶)에 있어서 간형질(稈形質) 특성(特性)으로 보아 해발고(海拔高) 400m이하(以下)의 지역(地域)이 왕대 재배(栽培)에 적합(適合)한 지역(地域)으로 사료(思料)된다.

• Journal of Astronomy and Space Sciences
• /
• 제31권2호
• /
• pp.145-148
• /
• 2014

There was a research on the prolongation of solar cycle 23 by the solar cyclic variation of solar, interplanetary geomagnetic parameters by Oh & Kim (2013). They also suggested that the sunspot number cannot typically explain the variation of total solar irradiance any more. Instead of the sunspot number, a new index is introduced to explain the degree of solar activity. We have analyzed the frequency of sunspot appearance, the length of solar cycle, and the rise time to a solar maximum as the characteristics of solar cycle. Then, we have examined the predictability of solar activity by the characteristics of preceding solar cycle. We have also investigated the hemispheric variation of flare index for the periods that the leading sunspot has the same magnetic polarity. As a result, it was found that there was a good correlation between the length of preceding solar cycle and spotless days. When the length of preceding solar cycle gets longer, the spotless days increase. It is also shown that the shorter rise time to a solar maximum is highly correlated with the increase of sunspots at a solar maximum. Therefore, the appearance frequency of spotless days and the length of solar cycle are more significant than the general sunspot number as an index of declining solar activity. Additionally, the activity of flares leads in the northern hemisphere and is stronger in the hemisphere with leading sunspots in positive polarity than in the hemisphere with leading sunspots in negative polarity. This result suggests that it is necessary to analyze the magnetic polarity's effect on the flares and to interpret the period from the solar maximum to solar maximum as the definition of solar cycle.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.90-93
• /
• 2002

In particle radiotherapy, a shape of the beam to conform the irradiation field is statically defined by the compensator, collimator and potal devices at the outside of the patient body. However the target such as lung or liver cancer moves along with respiration. This increases the irradiated volume of normal tissue. Prior discussions about organ motions along with respiration have been mainly focused on inferior-superior movement that was usually perpendicular to beam axis. On the other hand, the change of the target depth along the beam axis is very important especially in particle radiotherapy, because the range end of beam (Bragg peak) is so sharp as to be matched to distal edge of the target. In treatment planning, the range of the particle beam inside the body is calculated using a calibration curve relating CT number and water equivalent path length (WEL) to correct the inhomogeneities of tissues. The variation in CT number along the beam path would cause the uncertainties of range calculation at treatment planning for particle radiotherapy. To estimate the uncertainties of the range calculation associated with patient breathing, we proposed the method using sequential CT images with respiration waveform, and analyzed organ motions and WELs at patients that had lung or liver cancer. The variation of the depth along the beam path was presented in WEL rather than geometrical length. In analyzed cases, WELs around the diaphragm were remarkably changed depending on the respiration, and the magnitude of these WEL variations was almost comparable to inferior-superior movement of diaphragm. The variation of WEL around the lung was influenced by heartbeat.