• Title/Summary/Keyword: length of cycle

Search Result 831, Processing Time 0.021 seconds

An Experimental Study on the Performance of Inverter Heat Pump with a Variation of Frequency and Capillary Size

  • Choi, Jong-Min;Kim, Yong-Chan;Kim, Jong-Yup
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • v.6
    • /
    • pp.27-35
    • /
    • 1998
  • An experimental study was performed to investigate the optimum cycle of an inverter heat pump as a function of frequency. The performance of the inverter heat pump with the rated cooling capacity of 4,141 W(3,550kcal/h) was measured with a variation of frequency, indoor and outdoor temperature, and length of capillary tube in the psychrometric test room. As a base case, the inverter heat pump with the standard capillary length of l,000mm(optimum size for the frequency of 60Hz) and ASHRAE Test condition "A" was tested by varying frequency from 30Hz to 80Hz. Then, the optimum cycles were investigated by varying the length of capillary tube at each frequency level of 30, 60 and 80Hz. Based on the experimental data, the change of system characteristics between the optimum and the base case were analyzed for each selected frequency level. Generally, for low frequency level(30Hz), the longer length of the capillary tube compared with the standard size showed the higher energy efficiency ratio(EER), while for high frequency level(80Hz) the shorter length of the capillary tube showed the higher EER.

  • PDF

ON THE MINIMUM LENGTH OF SOME LINEAR CODES OF DIMENSION 6

  • Cheon, Eun-Ju;Kato, Takao
    • Bulletin of the Korean Mathematical Society
    • /
    • v.45 no.3
    • /
    • pp.419-425
    • /
    • 2008
  • For $q^5-q^3-q^2-q+1{\leq}d{\leq}q^5-q^3-q^2$, we prove the non-existence of a $[g_q(6,d),6,d]_q$ code and we give a $[g_q(6,d)+1,6,d]_q$ code by constructing appropriate 0-cycle in the projective space, where $g_q (k,d)={{\sum}^{k-1}_{i=0}}{\lceil}\frac{d}{q^i}{\rceil}$. Consequently, we have the minimum length $n_q(6,d)=g_q(6,d)+1\;for\;q^5-q^3-q^2-q+1{\leq}d{\leq}q^5-q^3-q^2\;and\;q{\geq}3$.

Exfoliative Vaginal Cytology and Serum Progesterone during the Estrous Cycle of Indigenous Ewes in Bangladesh

  • Zohara, Begum Fatema;Azizunnesa, Azizunnesa;Islam, Md. Faruk;Alam, Md. Golam Shahi;Bari, Farida Yeasmin
    • Journal of Embryo Transfer
    • /
    • v.29 no.2
    • /
    • pp.183-188
    • /
    • 2014
  • A study was carried out on 16 indigenous ewes in Bangladesh in order to assess the reproductive physiology, the pattern of vaginal cell exfoliation and progesterone profiles during the estrous cycle period. The mean estrous cycle length and duration of estrus were $15.8{\pm}0.12$ days and $31.1{\pm}0.57$ h respectively. The exfoliated epithelial cells were categorized into parabasal, intermediate, superficial and keratinized and their relative occurrences. The percentages of parabasal, intermediate and superficial cell type during proestrus were similar. The percentage of superficial cell type during estrus was 61.7%, which was significantly (p<0.01) differ from other types of cells and stages of estrus cycle. Metoestrus was predominant with neutrophils in addition with other cell types. Dioestrus was dominated by neutrophils. On days 0 to 5 of the cycle the progesterone concentration was 0.09 to $1.6{\pm}0.07ng/ml$. The length of diestrus was 5~10 days with a range of mean progesterone level of $1.6{\pm}0.07$ to $2.8{\pm}0.11ng/ml$. Progesterone levels increased significantly (p<0.01) after Day 5 and maximum level was $2.8{\pm}0.11ng/ml$ observed on Day 10 of the estrous cycle. Thereafter it dropped rapidly to basal level of $0.11{\pm}0.04ng/ml$ on Day 0 (p<0.01). These results indicate that the pattern of exfoliation of vaginal cells along with progesterone concentration could be used to determine the reproductive stages of indigenous ewe.

Physics study for high-performance and very-low-boron APR1400 core with 24-month cycle length

  • Do, Manseok;Nguyen, Xuan Ha;Jang, Seongdong;Kim, Yonghee
    • Nuclear Engineering and Technology
    • /
    • v.52 no.5
    • /
    • pp.869-877
    • /
    • 2020
  • A 24-month Advanced Power Reactor 1400 (APR1400) core with a very-low-boron (VLB) concentration has been investigated for an inherently safe and high-performance PWR in this work. To develop a high-performance APR1400 which is able to do the passive frequency control operation, VLB feature is essential. In this paper, the centrally-shielded burnable absorber (CSBA) is utilized for an efficient VLB operation in the 24-month cycle APR1400 core. This innovative design of the VLB APR1400 core includes the optimization of burnable absorber and loading pattern as well as axial cutback for a 24-month cycle operation. In addition to CSBA, an Er-doped guide thimble is also introduced for partial management of the excess reactivity and local peaking factor. To improve the neutron economy of the core, two alternative radial reflectors are adopted in this study, which are SS-304 and ZrO2. The core reactivity and power distributions for a 2-batch equilibrium cycle are analyzed and compared for each reflector design. Numerical results show that a VLB core can be successfully designed with 24-month cycle and the cycle length is improved significantly with the alternative reflectors. The neutronic analyses are performed using the Monte Carlo Serpent code and 3-D diffusion code COREDAX-2 with the ENDF/B-VII.1.

Optimum target values for manufacturing processes when drifting rate in the process mean is normally distributed (공정평균의 변화율이 정규분포인 제조공정의 최적 목표값)

  • Lee, Jae-Hoon;Park, Tae-Ho;Kwon, Hyuck-Moo;Hong, Sung-Hoon;Lee, Min-Koo
    • Journal of Korean Society for Quality Management
    • /
    • v.38 no.4
    • /
    • pp.540-548
    • /
    • 2010
  • We consider the problem of selecting the most profitable initial process mean and length of production cycle for manufacturing processes subject to a constant linear trend during the same cycle that varies after resetting the processes. Assuming that the quality characteristic of interest is normally distributed, the optimum initial process mean and the length of production cycle are jointly obtained by minimizing the expected loss per unit time. We assume that the quality loss function due to the deviation from the target value is quadratic and resetting loss is constant. We consider both cases of symmetric and asymmetric quality loss function. An illustrative example is given and sensitivity analysis performed.

A Kinematic Analysis of the National Elite Cross-Country Skiers' Double Poling Technique (국가대표 크로스컨트리 스키 선수들의 Double Poling 기술의 운동학적 분석)

  • Choi, Seul-Bi;Ryu, Jae-Kyun
    • Korean Journal of Applied Biomechanics
    • /
    • v.21 no.3
    • /
    • pp.259-268
    • /
    • 2011
  • This study aimed to examine the kinematic characteristics of the national elite cross-country skiers' double poling technique and to provide the quantitative data for better performance. Four male elite cross-country roller skiers skied maximum velocity with Double Pole technique. The cycle characteristics with angles of elbow, hip, and knee joint were analyzed. The results showed that CM velocity of the body was increased with the third cycle, the cycle time and length were also increased. The poling time and recovery time rate showed with 32.79%, 67.44% respectively. The joint angles with elbow, hip and knee were $106^{\circ}$, $133.14^{\circ}$ $156.87^{\circ}$ at pole in event, $158.94^{\circ}$, $65.7^{\circ}$, $140.19^{\circ}$ at pole out event. Elite skiers should decrease double poling time rate and increase recovery time rate in order to improve the double poling performance. The cycle length and velocity of the double poling should be increased for the better performance. The elbow angle should be minimized at pole in event with maximum extension until pole out event. The hip and knee angles should be increased for the recovery phase.

Reproductive Cycle of the Striped Eel Catfish Plotosus lineatus (Thunberg) (쏠종개 Plotosus lineatus (Thunberg)의 생식주기)

  • Heo, Seong-Il;Ryu, Yong-Woon;Rho, Sum;Lee, Chi-Hoon;Lee, Young-Don
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.40 no.3
    • /
    • pp.141-146
    • /
    • 2007
  • We investigated the reproductive cycle of the striped eel catfish Plotosus lineatus. Specimens were sampled in the coastal waters of Sungsan and Jocheon, east of Jeju, Korea, from September 2001 to August 2002. The gonadosomatic index (GSI) in females and males were reached a maximum in June $(14.18{\pm}10.38)$ and July $(0.35{\pm}0.12)$, respectively. Based on histological observations and GSI variation, the reproductive cycle was classified into the following successive stages: in females, growing (September-April), mature (April-June), spawning (June-July), and degenerative and recovery (July-September) and in males, growing (August-December), mature (September-May), spent (April-July), and degenerative and recovery (June-August). The total length at 100% maturity exceeded 15 cm and the fecundity ranged from 525 to 1176 eggs. The fecundity was correlated positively with total length and body weight. Histological observations of the gonads suggest that this species is a spring-summer spawner with group-synchronous type oocyte development.

A Hamiltonian Property of Pyramid Graphs (피라미드 그래프의 헤밀톤 특성)

  • Chang Jung-Hwan
    • The KIPS Transactions:PartA
    • /
    • v.13A no.3 s.100
    • /
    • pp.253-260
    • /
    • 2006
  • In this paper, we analyze the Hamiltonian property of Pyramid graphs. We prove that it is always possible to construct a Hamiltonian cycle of length $(4^N-1)/3$ by applying the proposed algorithm to construct series of cycle expansion operations into two adjacent cycles in the Pyramid graph of height N.

Experimental Study on the Cooling Performance of a Variable Speed $CO_2$ Cycle with Internal Heat Exchanger and Electronic Expansion Valve (내부열교환기 및 전자팽창장치를 적용한 가변속 이산화탄소 사이클의 냉방성능에 관한 실험적 연구)

  • Cho Honghyun;Ryu Changgi;Kim Yongchan
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.17 no.3
    • /
    • pp.209-215
    • /
    • 2005
  • Since a transcritical $CO_2$ cycle shows lower performance than conventional air conditioners in the cooling mode operation, it is required to enhance the performance of the $CO_2$ cycle by applying advanced technologies and optimizing components. In this study, the cooling performance of a $CO_2$ system measured by varying refrigerant charge amount, compressor frequency, EEV opening and length of internal heat exchanger. As a result, the cooling COP of the basic system without internal heat exchanger was 2.1. The cooling performance of the modified cycle applying internal heat exchanger improved by $4-9\%$ over the basic cycle.

Mitigating the Side-effect of Starting New Session in Multimedia Streaming using Multi-zoned Disk (구역분할 디스크를 사용하는 멀티미디어 서버에서 새로운 세션 시작에 따른 스케줄링 지연 현상의 최소화)

  • Cho, Kyeong-Sun;Won, You-Jip;Shin, Il-Hoon;Koh, Kern
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.31 no.8
    • /
    • pp.445-452
    • /
    • 2004
  • Zoning technology of disk improved the performance of disk subsystem with increase of storage capacity and average transfer bandwidth. SCAN disk scheduling with double buffering is used to utilize the performance of zoned disk in multimedia system. However, this method has a problem that generates jitter when the number of steams increases. In this article, we propose the novel approach, pre-buffering policy, to overcome this problem. Pre-buffering avoids jitter by buffering the lack of data before starting service, which is estimated from the current cycle length and the maximum cycle length. We can calculate cycle length, data sire needed in each cycle and the possible lack of data caused by the increase of the number of streams using the numerical model of disk subsystem. Pre-buffering can be applied for multimedia systems and contribute to provide clients with high quality service without jitter.