• 폴리머
• /
• 제28권1호
• /
• pp.92-102
• /
• 2004

하이드록시프로필 셀룰로오스를 6-콜레스테릴옥시카보닐펜타노일 클로라이드와 반응시켜 에스터화도가 2.25-2.91 범위의 값을 갖는 6-콜레스테릴옥시카보닐펜톡시프로필 셀룰로오스들을 합성하였다. 또한 6-콜레스테릴옥시카보닐펜톡시프로필 셀룰로오스의 아크릴산 에스터들과 액정질서를 지닌 이들의 광가교 필름들을 합성하였다. 미가교와 가교시료들의 열방성 액정의 특성과 아세톤 중에서의 가교시료들의 팽윤거동을 검토하였다. 하이드록시프로필 셀룰로오스는 쌍방성 콜레스테릭 상을 형성하는 반면 모든 콜레스테릴을 지닌 미가교 시료들은 단방성 콜레스테릭 상을 형성하였다. 6-콜레스테릴옥시카보닐펜타노일 클로라이드는 단방성 스멕틱 상도 형성하였다. 하이드록시프로필 셀룰로오스는 광학 피치 (λ$_{m}$ )가 온도상승에 의해 증가하는 우측방향의 나선을 형성하는 반면 모든 미가교 유도체들은 λ$_{m}$ 이 온도상승에 의해 감소하는 좌측방향의 나선들을 형성하였다. 6-콜레스테릴옥시카보닐펜톡시프로필 셀룰로오스와 이의 아크릴산 에스터의 액정상의 열적 안정성과 동일한 온도에서의 λ$_{m}$ 의 크기는 에스터화도가 증가함에 따라 감소하였다. 모든 가교시료들은 6-콜레스테릴옥시카보닐펜톡시프로필 셀룰로오스의 아크릴산 에스터들과 달리 반사색깔을 나타내지 않았으며 액정질서를 지닌 가교젤의 특징적인 이방성 팽윤을 나타냈다.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1084-1090
• /
• 2009

본 논문에서는 T-junction을 통해 분배된 두 선로를 한 쪽은 N개의 단일 셀을 사용한 우/좌형 전송선, 다른 한 쪽은 우형 전송선을 이용한 발룬을 설계하였다. 이에 있어 closed-form solutions과 그 해를 바탕으로 설계된 CPW 전송선을 이용한 초소형 광대역 발룬(80 %)을 제시한다. 또한 균일한 전류 분포를 위해 칩 커패시터를 장하시킨 안테나를 제안한다. 본 안테나는 $\lambda/4$ 이하의 간격을 두고 장하되었을 때 직렬 공진 현상을 보이며 안테나 입력 저항은 약 $204\;\Omega$이다. 제안된 루프 안테나의 단일 셀은 좀 더 균일한 전류 분포를 위해 약 $\lambda/12$의 간격을 두고 제작되었으며(전체 길이: $1\;\lambda$), 동일한 길이의 단일 권선 구조를 갖는 기존 루프 안테나에 비해 20 dB가 더 큰 자계를 형성함을 EM 시뮬레이션과 측정을 통해 알 수 있었다. 이 안테나와 제시된 발룬 사이에는 CPS(Coplanar Strip Line)구조가 사용된다. 본 안테나는 근거리장 UHF 대역 RFID 리더 안테나에 응용될 수 있다.

• 한국전자파학회논문지
• /
• 제21권1호
• /
• pp.46-52
• /
• 2010

본 논문에서는 비대칭 십자형 접지면 슬롯 구조를 갖는 원형 편파 마이크로스트립 안테나와 접지면 슬롯 구조를 재구성하여 편파 특성을 변환시키는 방안을 제안하였다. 접지면의 슬롯 구조에 의해 방사 소자의 전류 흐름이 교란되어 원형 편파가 발생되며, PIN 다이오드의 on/off 동작 상태를 조정하여 비대칭 십자형 슬롯의 구조를 대칭적으로 변환시켜 원형 편파 특성을 재구성할 수 있다. 제안된 안테나는 원형 편파 형성을 위한 perturbation이 접지면에 위치하므로, PIN 다이오드 상태 조정을 위한 바이어스 회로 또한 접지면에 위치하게 되어 구현의 복잡도가 낮아지며, 이로 인해 방사 패턴의 왜곡을 감소시킬 수 있다. 제안된 안테나는 2.4 GHz 대역의 동작 주파수에서 임피던스 대역폭 150 MHz, 축비 대역폭 35 MHz, 최대 안테나 이득 1.7 dBi의 특성을 나타내었다.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.183-192
• /
• 2005

This study compared cerebral lateralization index based on the area of neural activation with that based on the intensity of neural activation. For this purpose, 8 right-handed male college students (the mean age - 23.5 years) and 10 right-handed male college students (the mean age - 25.1 years) participated respectively in researches on visuospatial and verbal task brain function. Functional brain images were taken from 3T MRI using the single-shot EPI method. The result of measuring cerebral lateralization index based on the area of neural activation suggested that the right hemisphere is dominant in visuospatial tasks and the left one is in verbal tasks. However, the dominance is not sufficient to locate the exact part of the brain for these tasks. When cerebral lateralization index was computed based on the intensity of neural activation, it was derived that the area of cerebral lateralization closely related to visuospatial tasks is the superior parietal lobe, and the area of cerebral lateralization closely related to verbal tasks is the inferior and middle frontal lobes. Thus, cerebral lateralization index by area based on the intensity of neural activation as proposed by this study can determine the dominance of the cerebrum by area, so is helpful for accurate and quantitative determination of cerebral lateralization.

• 대한전자공학회논문지TC
• /
• 제49권1호
• /
• pp.73-77
• /
• 2012

본 논문에서는 차세대 초전도 핵융합 연구장치의 상태 진단 및 점검을 위한 마이크로파 진단 시스템에 적용하기 위한 광대역 대역 통과 여파기를 설계하였다. 광대역 특성 및 낮은 손실과 높은 스컷 특성을 위해 메타 전자파 구조를 적용하였다. 제안된 광대역 대역 통과 여파기는 한국형 핵융합 원자로의 마이크로파 진단 시스템 내에서 전압제어 발진기의 출력 단에 적용되어 전압제어 발진기에서 발생되는 고조파 성분들을 제거하여 시스템의 선형성을 개선하는 역학을 한다. 광대역 대역 통과 여파기는 18-28 GHz의 대역을 통과 시키고 그 외 대역에서 .20 dB 이하의 저지 특성을 갖도록 설계하였다. 메타 전자파 구조 특성 확인을 위해 위상의 분산도를 확인하였으며 통과 대역의 하측 대역에서 LH 특성을 갖으며 그 외 대역에서는 RH 특성을 보이도록 설계하였다. 제안된 광대역 대역 통과 여파기의 군지연 (Group Delay)의 경우 0.5 nS 이하로 매우 우수한 특성을 보였다.

• 한국전자파학회논문지
• /
• 제24권2호
• /
• pp.113-121
• /
• 2013

본 논문에서는 재구성 급전 구조를 갖는 4중 편파 안테나 시스템을 제안한다. 제안된 안테나는 4중 편파(수직/수평 선형 편파와 우선회/좌선회 원형 편파 혹은 45도 경사각을 갖는 수직/수평 선형 편파)를 갖기 위한 급전부와 그에 따른 편파 수신을 위한 패치 안테나로 구성된다. 본 안테나에서는 임의의 수신 신호에 대하여, 전기적 스위치를 통하여 재구성이 가능한 편파를 갖도록 설계되었으며, 제작된 안테나의 급전부의 삽입 손실은 약 1.2 dB이며, 안테나의 원형 편파 3 dB 축비 대역폭은 약 2 %, 안테나 이득은 약 4 dBi(c)로 측정되었다.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.72-81
• /
• 2014

Even though two-hands lifting/lowering activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting/lowering are also very common at the industrial site, forestry, farming, and daily life. The objective of this study was to compare one-hand lowering activity to lifting activity in terms of biomechanical stress for the range of lowering heights from knuckle height to 10cm above floor level with two workload 7.5kg and 15.0kg. Eight male subjects with LMM were asked to perform lifting/lowering tasks using both a one-handed (left-hand and right-hand) as well as a two-handed technique. Spinal loading was estimated through an EMG-assisted free-dynamic biomechanical model. The biomechanical stress of one-hand lowering activity was shown to be 43% lower than that of one-hand lifting activity. It was claimed that the biomechanical stress for one-hand lifting/lowering activity is almost twice (194%) of the one for two-hands lifting/lowering activity. It was also found that biomechanical stress by one-hand lowering/lifting activity with the half workload of two-hands lowering/lifting activity was greater than that of the two-hands lowering/lifting activity. Therefore, it might be a risk to consider the RWL of one-hand lowering/lifting activity to simply be a half of the RWL of two-hands lowering/lifting activity recommended by NIOSH.

• 대한인간공학회지
• /
• 제30권5호
• /
• pp.597-603
• /
• 2011

Objective: The objective of this study was to compare one-hand and two-hands lifting activity in terms of biomechanical stress for the range of lifting heights from 10cm above floor level to knuckle height. Background: Even though two-hands lifting activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting are also very common at the industrial site and forestry and farming. Method: Eight male subjects were asked to perform lifting tasks using both a one-handed as well as a two-handed lifting technique. Trunk muscle electromyographic activity was recorded while the subjects performed the lifting tasks. This information was used as input to an EMG-assisted free-dynamic biomechanical model that predicted spinal loading in three dimensions. Results: It was shown that for the left-hand lifting tasks, the values of moment, lateral shear force, A-P shear force, and compressive force were increased by the average 43%, as the workload was increased twice from 7.5kg to 15.0kg. For the right-hand lifting task, these were increased by the average 34%. For the two-hands lifting tasks, these were increased by the average 25%. The lateral shear forces at L5/S1 of one-hand lifting tasks, notwithstanding the half of the workload of two-hands lifting tasks, were very high in the 300~317% of the one of two-hands lifting tasks. The moments at L5/S1 of one-hand lifting tasks were 126~166% of the one of two-hands lifting tasks. Conclusion: It is concluded that the effect of workload for one-hand lifting is greater than two-hands lifting. It can also be concluded that asymmetrical effect of one-hand lifting is much greater than workload effect. Application: The results of this study can be used to provide guidelines of recommended safe weights for tasks involved in one-hand lifting activity.

• 대한인간공학회지
• /
• 제32권5호
• /
• pp.413-420
• /
• 2013

Objective: The objective of this study was to compare one-hand and two-hands lowering activity in terms of biomechanical stress for the range of lowering heights from knuckle height to 10cm above floor level. Background: Even though two-hands lifting/lowering activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting/lowering are also very common at the industrial site and forestry and farming. Method: Eight male subjects were asked to perform lowering tasks using both a one-handed as well as a two-handed lowering technique. Trunk muscle electromyographic activity was recorded while the subjects performed the lowering tasks. This information was used as input to an EMG-assisted free-dynamic biomechanical model that predicted spinal loading in three dimensions. Results: It was shown that for the left-hand lowering tasks, the values of moment, lateral shear force, A-P shear force, and compressive force were increased by the average 6%, as the workload was increased twice from 7.5kg to 15kg. For the right-hand lowering task, these were increased by the average 17%. For the two-hands lowering tasks, these were increased by the average 14%. Conclusion: Even though the effect of workload on the biomechanical stress for both one-hand and two-hands lowering tasks is not so significant for the workload less than 15kg, it can be claimed that the biomechanical stress for one-hand lowering is greater than for two-hands lowering tasks. Therefore, it can be concluded that asymmetrical lowering posture would give greater influence on the biomechanical stress than the workload effect for one-hand lowering activity. Application: The result of this study may be used to provide guidelines of recommended safe weights for tasks involved in one-hand lowering activity.

• 한국지구과학회지
• /
• 제45권4호
• /
• pp.318-326
• /
• 2024

Black ice, a thin and nearly invisible ice layer on roads and pavements, poses a significant danger to drivers and pedestrians during winter due to its transparency. We propose an efficient black ice detection system and technique utilizing Global Positioning System (GPS)-reflected signals. This system consists of a GPS antenna and receiver configured to measure the power of GPS L1 band signal strength. The GPS receiver system was designed to measure the signal power of the Right-Handed Circular Polarization (RHCP) and Left-Handed Circular Polarization (LHCP) from direct and reflected signals using two GPS antennas. Field experiments for GPS LHCP and RHCP reflection measurements were conducted at two distinct sites. We present a Normalized Polarized Reflection Index (NPRI) as a methodological approach for determining the presence of black ice on road surfaces. The field experiments at both sites successfully detected black ice on asphalt roads, indicated by NPRI values greater than -0.1 for elevation angles between 45° and 55°. Our findings demonstrate the potential of the proposed GPS-based system as a cost-effective and scalable solution for large-scale black ice detection, significantly enhancing road safety in cold climates. The scientific significance of this study lies in its novel application of GPS reflection signals for environmental monitoring, offering a new approach that can be integrated into existing GPS infrastructure to detect widespread black ice in real-time.