• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.524-530
• /
• 2019

In this study, polyether polyol polypropylene glycol and isophorone diisocyanate (IPDI) were synthesized based on polyrupopylene mono methyl eher (PM) for the synthesis of water - soluble polyurethane for coating on leather skin layer. After synthesis of prepolymer, PM was added at $40^{\circ}C$ to 1M, 2M, 3M, and 4M to inhibit the viscosity rise, and neutralization reaction and chain extension reaction were carried out to prepare polyurethane samples. According to the measurement results of the tensile strength, elongation and adhesive strength of the prepared sample, the tensile strength was 2.109 kgf / mm2 for PM 1M, 1.721kgf / mm2 for 4M, elongation was 496% for PM 1M, 522% for 4M, adhesion was 1.114 kgf / cm for PM 1M and 0.99 kgf / cm for 4M.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.15-22
• /
• 2019

In this study, polybutadiene based di-functional urethane acrylate oligomer (PB-UAO) were synthesized from polybutadiene diol and isophorone diisocyanate. And then, pressure sensitive adhesive films were prepared by mixing with synthesized oligomer, tri-functional acrylate monomer (Tris(2-acryloyloxyethyl) isocyanurate (TAOEIC) or Trimethylolpropane triacrylate (TMPTA) or Pentaerythritol triacrylate (PETA)), mono-functional acrylate monomer (Stearyl acrylate) and UV initiators. Effects of types and contents of trifunctional acrylate monomers on peel strength, tensile strength, elongation, thermal stability and water absorption property were studied. As the contents of tri-functional acrylate monomer increased, and as the molecular weight of tri-functional acrylate monomer decreased, peel strength, elongation and water absorption showed a tendency to decrease whereas tensile strength and thermal stability showed a tendency to increase.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.97-109
• /
• 2003

This study was conducted to investigate use possibility on waste water sludges of water disposal plant as raw materials of organic compost at Fertilizer Official Regulation of Fertilizer Management Law in 2002. In heavy metal contents, some water service sludges were discovered a little over than the standard levels of raw material regulated in organic compost and most of them were not reached the levels. But they were difficult for using the raw materials of organic compost owing to shortage of the organic content. It was judged that the fiber and leather sludges were much in the heavy metal contents and they couldn't use as the raw materials of organic compost. There was afraid that a little heavy metal contents of cosmetic sludge were less than the levels, but it was possible to use selectively as a raw material.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.304-314
• /
• 2004

The objective of this study was to investigate the effect of organic materials (compost, straw, green manure, pig manure, seed production oil cake, and industrial by products including municipal sewage sludge, industrial sewage sludge, leather processing sludge, and alcohol fermentation processing sludge) on physical properties of soils in seven paddy and four upland fields with differential soil textures, sandy loam, loam, or clay loam, etc. The investigated physical parameters were bulk density (BD), air permeability (AP), macroporosity, hardness, shear resistance, frictional resistance, water stability aggregate (WSA), and Middleton's dispersion ratio. Except for coarse sandy loam field with weak structure, a decrease in BD and shear resistance, and an increase in macroporosity and AP in plots with applying organic materials compared to plots without applying organic materials appeared. In upland fields, the positive effect of organic materials on WSA, BD, and air permeability was higher than in paddy fields. The combined plot of NPK and compost had lower BD, hardness, and shear resistance, and higher macroporosity and WSA than plot with compost. Green manure had higher positive effect on physical properties of soils compared to other organic materials and the extent of positive effect had no significant correlation with soil organic matter content. Of industrial byproducts applied in coarse sandy loam soil under upland condition, municipal sewage sludge and pig manure compost had higher effect on increase of WSA than leather processing sludge and alcohol fermentation processing sludge. Unlike WSA, there were no significant differences between industrial byproduct types in other physical properties. in silty clay loam soil under the upland condition, straw had more positive effect on soil physical parameters than hairy vetch and pig manure. Therefore, different organic materials had differently active effect on physical parameters depending on types of soil and land use. Especially, it could be thought that well-decomposed organic materials have the advantage of an increase in organic matter content, while coarse organic materials of an increase in WSA.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.4
• /
• pp.274-279
• /
• 2007

The toxicitiy of organic sludge such as municipal sewage sludge (MSS), industrial sewage sludge (ISS), alcohol fermentation processing sludge (AFPS) and leather processing sludge (LPS) were evaluated with three environmental biomarkers as acetylcholinesterase, cytochrome P450, and heat shock protein 70 extracted from earthworm (Eisenia fetida). Their toxicities were compared with those of pig manure compost (PMC). MSS, ISS, LPS, and AFPS did not significantly affect the acetylcolinesterase activity, whereas only the elutriate of PMC slightly was increased the activity. MSS, AFPS, and PMC tended to slightly inhibit the cytochrome $P_{450}$ activity, but ISS and LPS showed significantly the inhibitory effect on cytochrome $P_{450}$. The hsp70 expression began to increase after treatments and showed high induction at 6 hour, followed by zero level at around 12 hour. The quantity of the hsp70 expressed by elutriate treatments of PMC, AFPS, MSS, ISS, and LPS was 1.9, 3.0, 3.3, 4.4, and 4.7 fold higher than that of distilled water. These results indicate that in toxicity tests of five organic waste materials, four kinds of sludge materials appeared more toxic than PMC. Results of AChE, P450, and hsp70 of earthworm might be useful for expecting or assessing an effect by exposure of organic wastes to earthworms in soil.

• Journal of Mushroom
• /
• v.5 no.1
• /
• pp.43-49
• /
• 2007

Application of sludge wastes into the field may help soil fertility with physical, chemical and biological properties. Efficient use of sludge waste, however, requires an individual assessment of the waste products. A lot of experiment into the organic waste-treated soils has been done for decade. However, studies have not been carried out on the assessment of agricultural soil by Basidiomycota. This study was assessed the influence of sludge application on soil healthy in agricultural upland soils. The organic wastes selected for long-term application experiment in this study were municipal sewage sludge (MSS), industrial sewage sludge (ISS), leather processing sludge (LS), alcohol fermentation processing sludge (FS), and pig manure compost (PMC). To develop the soil healthy assesment method, soil samples were diluted by 20X with distilled water. After shaking at 200rpm for 30 minutes, the shaked sample was mixed on PDA(Potato Dextrose Agar). And sterilized at $121^{\circ}C$ for 20 minutes. Coriolus hirsutus (MKACC 50560) was inoculated on petri-dish including PDA mixed sample. After the media was incubated at $25^{\circ}C$ for five days, the mycelial growth of C. hirsutus was measured. When the mycelial growth on sample media was compared with growth on media contained PDA only, well grown media contained sample soil was assesed as healthy soil. The results suggest that the simple method by Coriolus hirsutus is a handy way to assess the healthy of waste sludge-applied upland soils.

• Textile Coloration and Finishing
• /
• v.28 no.2
• /
• pp.92-100
• /
• 2016

To chemically prepare polypyrrole(pPy) coated fabrics(silk, cotton and nylon fabrics), the fabrics were first soaked in 0.4M oxidant $FeCl_3$/0.06M dopant anthraquinone-2-sulfonic acid solution for 5min at room temperature, and subsequently soaked in a 0.4M monomer pyrrole aqueous solution for 5min at room temperature. The content(wt%) of coated pPy in the coated fabrics was controlled by the number of treatments(these two steps). This study examined the effect of the number of treatments/pPy content on the sheet resistance, mechanical/bending properties and color behaviors of pPy coated fabrics. The coated pPy content, sheet resistance(${\Omega}$/square) and color strength(K/S) of pPy coated fabrics increased sharply with increasing number of treatments up to 20 times, while the increase slowed down afterward. The tensile strength, elongation at break and lightness($L^*$) decreased with increasing number of treatments. The tensile modulus and bending rigidity of coated fabrics increased significantly with increasing number of treatments/coated pPy content. This indicated that the flexibility of coated fabrics decreased considerably.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.403-408
• /
• 2012

In this study, the homogenous Pd nanoparticles (Pd NPs) were first prepared with bayberry tannin (BT) as the stabilizers. Subsequently, the obtained bayberry tannin-stabilized Pd nanoparticles (BT-Pd) were immobilized onto ${\gamma}-Al_2O_3$ to prepare heterogeneous ${\gamma}-Al_2O_3$-BT-Pd catalysts. Fourier Transformation Infrared Spectrum (FTIR) and X-ray Photoelectron Spectroscopy (XPS) analyses confirmed that the Pd NPs were well stabilized by the phenolic hydroxyl groups of BT. Transmission Electron Microscopy (TEM) observation indicated that the diameter of the Pd NPs can be effectively controlled in the range of 4.2-16.0 nm by varying the amount of BT. It is found that the ${\gamma}-Al_2O_3$-BT-Pd catalysts exhibit highly activity for various olefin hydrogenations. For example, the initial TOF (turnover frequency) of the ${\gamma}-Al_2O_3$-BT-Pd in the allyl alcohol hydrogenation is as high as $12804 mol{\cdot}mol^{-1}{\cdot}h^{-1}$. Furthermore, the ${\gamma}-Al_2O_3$-BT-Pd can be reused 5 times without significant loss of activity, exhibiting a superior reusability as compared with conventionally prepared ${\gamma}-Al_2O_3$-Pd catalysts.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.7053-7060
• /
• 2015

In the present work, novel orange peel was extracted with 100%EtOH (ethanol) and fractionated into four fractions namely F1, F2, F3, F4 which were eluted from paper chromatographs using 100%EtOH, 80%EtOH, 50%EtOH and pure water respectively. The crude extract and its four fractions were evaluated for their total polyphenol content (TPC), total flavonoid content (TFC) and radical scavenging activity using DPPH (1,1-diphenyl-2-picrylhydrazyl) assay. Their cytotoxic activity using WST assay and DNA damage by agarose gel electrophoresis were also evaluated in a human leukemia HL-60 cell line. The findings revealed that F4 had the highest TPC followed by crude extract, F2, F3 and F1. However, the crude extract had the highest TFC followed by F4, F3, F2, and F1. Depending on the values of $EC_{50}$ and trolox equivalent antioxidant capacity, F4 possessed the strongest antioxidant activity while F1 and F2 displayed weak antioxidant activity. Further, incubation HL-60 cells with extract/fractions for 24h caused an inhibition of cell viability in a concentration-dependent manner. F3 and F4 exhibited a high antiproliferative activity with a narrow range of $IC_{50}$ values ($45.9-48.9{\mu}g/ml$). Crude extract exhibited the weakest antiproliferative activity with an $IC_{50}$ value of $314.89{\mu}g/ml$. Analysis of DNA fragmentation displayed DNA degradation in the form of a smear-type pattern upon agarose gel after incubation of HL-60 cells with F3 and F4 for 6 h. Overall, F3 and F4 appear to be good sources of phytochemicals with antioxidant and potential anticancer activities.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.211-222
• /
• 2017

In this study, we investigated the dyeing properties of the ultra-fine nylon suede non-woven fabric with Sulphur black dye regarding to the effect of dye concentrations, reducing agent contents, sodium carbonate contents, antioxidant contents, immersion temperature and exposure time in air by pad-steam process. The optimal conditions of dyeing for the ultra-fine nylon suede non-woven fabric were determined with dye concentration of 30% o.w.f., reducing agent content of $9{\sim}13g/{\ell}$, sodium carbonate content of $1{\sim}4g/{\ell}$, antioxidant content of $1{\sim}5g/{\ell}$, immersion temperature of $70^{\circ}C$, exposure time of 20 minutes in air and immersion time of 1 minute, respectively. Meanwhile, the colorfastness to washing, the colorfastness to light, and the colorfastness to perspiration for dyed ultra-fine nylon suede non-woven fabric were achieved in the range of 4-5 grades. The formaldehyde and arylamine were not detected on the ultra-fine nylon suede non-woven fabric by KC tests.