• Korean Journal of Medicinal Crop Science
• /
• v.28 no.2
• /
• pp.136-141
• /
• 2020

Background: The leaves of the goji berry (Lycium chinense Mill.) are used as raw materials in processing and by replace fruits to some extent. The reason is that the leaves are cheaper, however, betaine content is higher than in the fruits. These experiments were conducted to determine the planting density and cutting height for producing a large number of leaves. Methods and Results: The cultivar 'Myeongan' with many branches was used. When the shoot height reached 50 cm - 70 cm, harvesting was possible four times a year. The time to next harvest was approximately 38 days after regeneration of new shoots. Leaf quantity was in the order of 1st > 2nd > 4th > 3rd harvest. Insect damage occurred during the third harvest in late July and early August, therefore, eco-friendly control was necessary. The total yield was higher at the planting density 60 cm × 30 cm than that of 60 cm × 20 cm or 60 cm × 40 cm. The yield at cutting for shoot height of 60 cm was increased by 6.3 percent compared to that of 50 cm, At the cutting height of 70 cm, harvest was difficult owing to hardening of stems and thorns. Betaine content, an indicator component of goji berry, was not significantly different according to planting densities and cutting height. Conclusions: The ideal cutting period to produce leaves of goji berry for processing is when the shoots grow to approximately 60 cm, and the leaves can be harvested 4 times a year. The dried-leaf yield was highest at the planting density of 60 cm × 30 cm.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.193-200
• /
• 1992

This study was carried out to determine the optimum fertilizer level of phosphate for maximum yield of soiling cowpea(Vigna sinensis Endlicher) in Cheju. The results obtained are summarized as follows:1. Plant length, fresh yield, stem and leaf weight per plant, node number of main stem, primary branch number per plant, pod number per plant and pod weight per plant increased with increasing of phosphate level regardless of growth stage.2. Plant length and node number of main stem did not increase after August 25, 40 days after planting. Leaf weight and fresh yield were greatest on August 25, and then reduced. 3. Stem weight the number of leaves and pods and pod weight per plant increased until September 13, 80 days after planting. 4. Increased level of phosphate delayed leaf weight decrease after August 25. 5. Root length and root weight per plant increased with increasing level of phosphate regardless of growth stage, and they did not increase after Augest 25. 6. Nodule number and nodule weight per plant also increased as phosphate rate increased regardlessof growth stage. Nodule number and nodule weight were greatest on August 5, and then rapidly decreased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.115-120
• /
• 1981

Effect of soil water on the growth of Panax ginseng(2 years old) was investigated through pot experiment. the results were as follows. 1. Optimum soil moisture content for root yield appeared to be 65.5% of field capacity(22.1% fresh weight basis) and at 31.5%(10.7% fresh weight basis) relative growth rate was nil. 2. Under suboptimum condition of soil moisture, emergence of shoot and leaf unfolding was delayed. The rate of emergence of shoot and leaf area was also decreased while missing shoot rate was increased. 3. Root yield was positively correlated with leaf area per plant(r=0.91 **), stem diameter (r=0.73**), stem length(r=0.71 **) fresh top yield(r=0.93**) and negatively with missing shoot rate(r=-0.77**). 4. Fresh root weight showed negative correlation(r=-0.80**) with water content of root indicating that tissue is more compact when grown at sufficient water.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.39-40
• /
• 2001

This experiment was conducted to investigate the effect of root zone heating on the growth of cut minirose Rosa hybrida L. ′Little Marble′ in winter season. Effects of four different root zone temperatures of 16, 20, 24$^{\circ}C$ and non-heating control on the growth and productivity were compared. Harvested cut-flowers were measured for stem length, stem diameter, fresh and dry weights, numbers of leaves, stems and flowers, days to flower, and chlorophyll concentration. The results showed that mean height was the greatest at 16$^{\circ}C$. Days to flower was the shortest at 24$^{\circ}C$. Fresh and dry weights of top (shoot＋leaf＋flower), shoot and leaf were the greatest at 2$0^{\circ}C$. Stem and flower numbers were the greatest at 16$^{\circ}C$, but leaf number was the greatest at 2$0^{\circ}C$. Mean cut flower yield was the greatest at 16$^{\circ}C$. Chlorophyll concentration was slightly higher at 16$^{\circ}C$, but was not significantly different among the treatments. Stem diameter was the greatest at 2$0^{\circ}C$. Dry matter was the greatest at 24$^{\circ}C$. Total yield of cut rose stems increased with increasing temperature. Combined heating could save 24% in fuel cost as compared to the air heating alone. The results obtained suggested that optimal root zone temperature for the growth of cut rose "Little Marble" was 2$0^{\circ}C$, and the greenhouse heating energy can be saved by minimal air heating combined with root zone heating to 2$0^{\circ}C$.

• Journal of Sericultural and Entomological Science
• /
• v.35 no.1
• /
• pp.11-16
• /
• 1993

Field experiment and silkworm rearing were conducted for 4years in an attempt to reduce phosphorus fertilizer in mulberry field with high levels of phosphate. Experiments consisted of four treatments; normal recommended P application(13kg P2O5/10a), half, null and no fertilizer on each of 3 mulberry fields, two fields with 300ppm and one filed begining with 450ppm of aviable P2O5 content in soil. One of 300ppm fields was used for leaf quantity and one for leaf quality test by silkworm rearing. Leaf yield in the 300ppm field decreased after the 3rd spring in the no phosphorus treatment and in the 4th fall in the half phosphorus treatment. No yield decrease occurred in 450ppm field for 4 years. Yield decrease did occur in the next rearing season after soil phosphate content in the 10~20cm zone dropped below 150ppm. Phosphorus fertilizer should be applied at this time. Though P2O5 concentration in leaves of no phosphorus treatment was 0.18% lower that that of conventional treatment, there were no difference in cocoon quality.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.674-683
• /
• 2017

The frequency and intensity of soil moisture stress associated with climate change has increasing, and the stability of field crop cultivation has decreasing. This experiment was conducted to investigate the effect of soil moisture management method on growth and yield of corn. Soil moisture was managed at the grade of WSM (wet soil moisture, 34.0~42.9%), OSM (optimum soil moisture, 27.8~34.0%), DSM (dry soil moisture, 20.3~27.8%), and ESM (extreme dry moisture, 16.6~20.3%) during V8 (8th leaf stage)-VT (tasseling stage). After VT, irrigation was limited. The treated amount of irrigation was 54.1, 47.7, 44.0 and 34.5% of total water requirement, respectively. The potential evapotranspiration during the growing period was $3.29mm\;day^{-1}$, and upward movement of soil water was estimated by the AFKAE 0.5 model in the order of ESM, DSM, OSM, and WSM. We could confirm this phenomenon from actual observations. There was no significant difference in leaf characteristics, dry matter, and primary productivity depending on the level of soil moisture, but leaf development was delayed and dry weight decreased in DSM. However, dry weight and individual productivity of DSM increased after irrigation withdrawal compared to that of OSM. In DSM, ear yield and number of kernels per ear decreased, but water use efficiency and harvest index were higher than other treatments. Therefore, it is considered that the soil moisture is concentratedly managed before the V8 period, the V8-VT period is controlled within the range of 100 to 500 kPa (20.3~27.8%), and no additional irrigation is required after the VT.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.2
• /
• pp.84-95
• /
• 2021

The purpose of this study was to assess the forage productivity and nutritive value of kenaf at different fertilizer application amounts and various stages of maturity. The experiment was conducted from May to September 2020, the amount of 80 kg of kenaf seed/ha was supplied with different types and amounts of nitrogen fertilizer and the plants were harvested at 10-day intervals from different harvesting dates (24^th August and 3^rd, 13^th, 23^rd September). According to the different fertilizer types and application amounts, the highest kenaf height was recorded in the inorganic fertilizer amounts of 200 and 250 kg N/ha and the fresh and DM yield were significantly improved in the inorganic nitrogen amount of 250 kg N/ha. The highest CP and TDN content in the leaf was achieved in the inorganic fertilizer amounts of 150 and 200 kg N/ha, respectively; and the highest TDN content in the stem was also found in the inorganic fertilizer amount of 200 kg N/ha. According to the different harvesting dates, the highest DM ratio was found in the harvesting date of 13th September, the leaf ratio increased with advanced maturity, whereas the stem ratio decreased significantly and the highest DM yield of kenaf was recorded in the harvesting dates of 13^th and 23^rd September. Besides, the highest CP, CF, CA, ADF, NDF and TDN content in the leaf as influenced by different harvesting dates was 15.4, 31.8, 10.2, 22.1, 34.7 and 76.5%, respectively, and the CP, CA, ADF and TDN in stem decreased significantly with advanced maturity of kenaf. In conclusion, the optimal fertilizer amounts and the appropriate harvesting dates for a high forage yield and high-quality kenaf as livestock feed were the inorganic fertilizer application amounts of 200-250 kg N/ha and from 13^th and 23^rd September, respectively.

• Journal of Ginseng Research
• /
• v.11 no.1
• /
• pp.46-55
• /
• 1987

The regression line was used to predict ginseng root yield from characters of aerial parts, stem diameter, leaf length and width, and degrees of missing plants per unit area. The rates of fitness of predicted yield on practical yield investigated in field were high. Especially, theoretical yield calculated by the size of stem diameter was a good fit. Therefore, a line regression appeared to be a satisfactory fit.

• Journal of the Korean Society of Tobacco Science
• /
• v.10 no.2
• /
• pp.99-107
• /
• 1988

Pot experiment was conducted to find out the effect of lime application on yield and chemical composition of burley tobacco in 1986, Lime increased exchangeable calcium and pH of soil, but decreased Al, Fe and Mn concentrations. Yield was increased by lime application, however lime could not be caused to yield increasing in the soil with high calcium contents. Cored leaves of limed Plot contained higher Mg. K, total nitrogen, NO3-nitrogen, water soluble and insoluble ash, alkalinity number of water soluble and insoluble ash, citric and malic acid, but lower Fe, Mn, protein-nitrogen, NH3-nitrogen, nicotine petroleum ether extract, palmitic and linolenic acid concentrations than those of unlined plot. The linoleic acid and volatile neutral constituents of cured leaves were not affected by liming. Lime increased yield, however it did not affect leaf duality in respect to chemical characteristics, suggesting that liming should be necessary for tobacco cultivation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.2
• /
• pp.177-186
• /
• 1997

A field experiment was conducted to evaluate growth characteristics, dry matter yield and crude protein yield according to different planting dates at sorghum $\times$ sudangrass hybrid(SSH) and soybean intercropping. Planting dates were five treatment of may 6(Tl), may 13(T2), may 20(T3), may 27(T4) and june 3(T5), and cutting frequency was two times a year. 1. Plant length of SSH was the highest at T2 as 253cm, but T5 was the shortest as 203cm. In the soybean, T3 and T4 were the highest as 113cm, respectively. Leaf length of SSH was high at T5. In the soybean, T2 was the highest as 17cm. Average leaf width of T2, T3 and T4 was higher than TI and T5. 2. Leaf number of T3(SSH and soybean) was higher than other treatments, Stem diameter of SSH and soybean showed the highest as 12.3mm and 8.6mrn at T5 and T3, respectively. In the SSY mean stem hardness of TI was the highest as 2.5kg/$cm^2$, but soybean was the highest at T1(8.0kg/$cm^2$) 3. Deed stubble according to move seeding date of SSH were 11.4 percentage at TI, and 3.9 percentage at T5 treatment. 4. Total dry matter yield according to move seeding date was the highest at T3 as 20,937kghq but T5 of late seeding was the lowest as 16,04Okgha(P < 0.05). 5. In the first cutting time, protein content of SSH was the highest at T3 as 9.9 percentage, but T1 was the lowest as 8.4 percentage. In the 2nd cutting, T5 was the highest as 8.7% but T1 was the lowest as 6.2%. In the soybean, T5 was the highest as 19.4% but TI of early seeding was the lowest as 16.2 percentage. Crude protein yield was the highest at T3 as 2,233.5kghq but TI of early seeding was the lowest as 1,579.7kgha (P < 0.05). As mentioned above the results, T2(may 13), T3(may 20) and T4(may 27) treatment could be recommended as the best suitable seeding date when drymatter and protein yield were considered.