• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.1
• /
• pp.26-34
• /
• 1998

In this paper, we confirm that the instanteneous phase current of the bifilar-wound hybrid stepping motor is dependent of lead angle by the experimental results. The variation of phase current with lead angle gives informations about the rotor position at the moment when phase winding coil is excited. We show that the rotor position of the bifilar-wound hybrid stepping motor for the closed-loop drives can be detected by using the instantaneous phase current measurement. We propose an instantaneous phase current equation as the function of electrical lead angle by the modeling of the bifilar-wound hybrid stepping motor. We also analyze the relationship between instantaneous phase current and rotor position by the computer simulation results. By the experimental results, we also confirm that the information about the rotor position can be obtained from the instantaneous phase current values at the instance of $\pi/2$ electrical angle of excitation pulse. pulse.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.77-80
• /
• 2001

IC lead frame needs the precision shape for good efficiency. In the blanking process, there are many parameter effected the dimensional accuracy : lead width, blanking order, striper force, tool clearance etc. In this research, the4 undesirable defects appeared in the final blanking process. so we measured the deflection of lead according to the stripper force using $PAM-STAMP_{TM}$. In the result, the deflection was decreased by increasing the stripper force properly. and we changed the blanking order on the test model. In the blanking order, deflection is good from the outer line position blanking to center line position. so we can design the precision die without tryout by the prediction of the lead deflection.

• The Korean Journal of Pain
• /
• v.20 no.2
• /
• pp.186-189
• /
• 2007

The most important factors for successful stimulation of the spinal cord are strict patient selection and proper lead position. To ensure proper lead position, paresthesia produced by the stimulator should cover all of the areas in which pain is occurring. Until recently, only the quadripolar electrode lead has been used in for spinal cord stimulation in Korea, however, the 8 electrode lead was recently introduced to offer greater programming options and enhance the precision with which paresthesias is delivered to the desired sites. In addition, because the 8-electrode lead has a longer electrode span, it provides greater dermatomal coverage of up to 2 vertebral segments. Furthermore, the 8-electrode lead allows electronic repositioning of the stimulation to accommodate changing pain patterns, thereby reducing the need for lead revisions due to lead migration. Here, we present a case in which complex regional pain syndrome type I was successfully managed using an 8-electrode lead to induce spinal cord stimulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.189-193
• /
• 1996

Piezoelectric actuator is widely used in precision positioning applications due to its excellent positioning resolution. However, serious hysteresis nonlinearity of the actuator deteriorates its open loop positioning capability. Generally, a nonlinear hysteresis model is used in feedforward loop to improve positioning accuracy. In this study, however, a simple lead compensator is proposed as a substitution for a complex nonlinear hysteresis model and tested through experiments for precision position control.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.120-130
• /
• 1999

In this paper, we show that the instantaneous phase current of the bifiler-wound hybrid stepping motor is dependent of lead angle and that the information of motor position is obtained from the instantaneous phase current at ${\pi}/2$ by the theoretical formular and its computer simulation results. From the facts, we design the microcontroller-based motor position sensorless controller of optimal lead angle, which generates the excitation pulses for the closed-loop drives. The controller is consist of microcontroller which has the function of A/D converter, programmable input/output timer, and the transfer table which has the values of optimal lead angle depending on motor velocity, and ROM which has the transfer table of the values of lead angle depending on velocity of motor and the values of instantaneous phase current at ${\pi}/2$. From the design of microcontroller-based controller, we minimize the external interface circuit and obtain flexibility by changing the contents of ROM transfer tables and the control software. We confirm that the designed controller drives the bifilar-wound hybrid stepping motor is the mode of optimal lead angle by comparing the instananeous phase current experimental results and computer simulation results.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.441-445
• /
• 2012

X-ray Chest P-A is very important and basic diagnosis examination for pregnant women. For a pregnancy period pregnant women should be treated very carefully not to be exposed to any radiation which might cause harmful damage to women and babies as well. Lead apron is one of the effective methods to protect pregnant women from the X-ray radiation. However, it is difficult to obtain the accurate position of pregnant women during X-ray Chest P-A since conventional lead apron method forces pregnant women to hold the apron by themselves only to make pregnant women very uncomfortable and hard to maintain accurate position during radiation. As a consequence, it is common to get low quality images of X-ray Chest P-A due to the overlap of apex of lung and scapular. In order to fix this problem, we made new design lead apron that allowed pregnant women to be more comfortable to maintain accurate position during X-ray Chest P-A position. Finally, with this new design lead apron, it was possible to get the best optimized images of X-ray Chest P-A of pregnant women by minimizing overlapping apex of lung and scapular.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.198-201
• /
• 1999

An automated storage and retrieval machinery for high rack warehouse systems is developed in order to stack the various kinds of productions. However, according to increase in the rack height, the long lead time should be taken. In stacker crane systems, the variations of the lifting height and the load generate the vibration of lifting machine, and it makes a Position control to be difficult Therefore, the reduction of vibration will be important factor for saving the lead time and the damage of Productions. This paper deals with a position control of stacker crane in automated high rack warehouse system by using a gain-scheduled control algorithm via a LMI method, where the variations of elastic coefficient of the stacker crane's post are considered.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.2
• /
• pp.46-52
• /
• 2004

Numerous connectors are used in automobiles for transmission of electrical signals across various electro-mechanical components. The connectors must operate with high reliability in order to minimize failures due to signal degradation. In this work, the effects of contamination at the contact interface of connectors used fur automobile crankshaft position sensor on the impedance change were investigated. An experimental set-up was built to simulate the electrical signal transmitted from the sensor to the engine control unit through a connector. Output from the connector was investigated using connectors contaminated with engine block residues and water droplets. It was found that slight contamination of the connectors could lead to significant signal degradation which can lead to engine failure. Also, the effect of water in the connector altered the signal severely. However, the signal gradually regained the original state as the water evaporated from the interface.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.66-73
• /
• 2003

In this study, a methodology of synchronous control which can be applied to position synchronization of a two-axis rotating system is developed. Based on coupling structure, the synchronous control system is composed of disturbance observer, speed and synchronous controllers. The speed controller is designed to follows speed reference. The disturbance observer is designed to restrain synchronous error. In addition, the synchronous controller is designed for a viewpoint of accurate synchronization in lead compensation law. The effectiveness of the proposed method is verified through simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.1008-1011
• /
• 2005

It is necessary for the design of lead frame punches in blanking to consider buckling because inner lead pitch of lead frame has been narrowed by miniaturization and high accumulation of semiconductor. In addition, if process variables change in press stamping process, the lift of punches is no longer influenced in wear and punches can be broken suddenly. To prevent the fracture of fine pitch lead frame punches, having considered applying reinforcement to it, this paper verified the design with buckling analysis. This study presents the optimal position and number of reinforcement to be attached to punches. Finally this study presents design rules of attaching reinforcement.