• Journal of the Semiconductor & Display Technology
• /
• v.12 no.1
• /
• pp.23-28
• /
• 2013

Epoxy resins are widely used in microelectronics packaging such as printed circuit board and encapsulating for semiconductor manufacturing. Water can diffuse into and through the epoxy matrix systems and moisture absorption at boarding interfaces of matrix resin systems can lead to a hydrolysis at the interfaces resulting in delamination of encapsulating materials. In the study, the changes of diffusion coefficient and moisture content ratio of epoxy resin systems with nano-sized fillers according to the change of liquid type epoxy resins were investigated. RE-304S, RE-310S, RE-810NM and HP-4032D as a epoxy resin, Kayahard AA as a hardener, and 1B2MI as a catalyst were used in these epoxy resin systems. After curing, moisture content ratios were measured with time under the 85 and 85% relative humidity condition using a thermo-hydrostat. The maximum moisture absorption ratio and diffusion coefficient of EMC decrease with the filler content. It can be seen that these decreases are due to the increase of filler surface area and the decrease of moisture through channel with the content of nano-sized filler.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.3
• /
• pp.517-526
• /
• 2017

The biodegradation and water absorption properties of lignin/poly(vinyl alcohol) (PVA) nanofibrous webs are investigated. Lignin/PVA nanofibrous webs containing 0, 50, and 85wt% of lignin were prepared via an electrospinning process to observe the effect of the lignin concentration on the biodegradability and water absorption properties of lignin/PVA nanofibrous webs. The morphology of the materials was examined by field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). To understand the wetting behavior and hydrophilic nature of the electrospun lignin/PVA nanofibrous webs, the water absorbency, contact angle, and water uptake were examined. The enzymatic degradation of lignin/PVA nanofibrous webs was investigated using laccase by measuring total organic carbon (TOC) concentration over a course of 50 days. Water drops were absorbed immediately into all of the specimens. The water uptake of lignin/PVA nanofibrous webs increased as the amount of PVA in the lignin/PVA hybrid webs increased. The enzymatic degradation experiment indicated that the inherent biodegradability of lignin was retained after its transformation into nanofibers. Our findings imply that blending these two types of polymers is promising because it can lead to the development of a new range of multifunctional materials such as antimicrobial absorbent nanotextiles based on sustainable biopolymers.

• Journal of the Korean Ceramic Society
• /
• v.16 no.1
• /
• pp.31-37
• /
• 1979

The middle point of composition within the system $MgO-Al_2O_3-SiO_2$ has been studied for applicability as ceramics dielectrics. A Kyul Sung Tale of high purity, magnesia clinker of Sam-wha chemical company, C.P. aluminium oxide, calcium carbonate, red lead, barium carbonate which was made into frit were used the raw materials. A number of steatite ceramics were prepared under carefully controlled condition and the water absorption, linear shrinkage, power factor, dielectric constant and dielectric loss were measured at elevated temperature. When we used magnesia clinker as flux, the quantity of this flux was 0.05mole, sintering temperature was continued for 2 hrs. at 1, 27$0^{\circ}C$. From this conditions, we could get the data whose power factor was 0.142%, water absorption was zero, linear shrinkage was 8.76%, dielectric constant was 5.63, dielectric loss was 0.00799. When we used red lead as flux, the quantity of this flux was 0.033mole and 0.066mole, sintering temperature was continued for 2hrs. at 1, 26$0^{\circ}C$. From this conditions, we could get the data whose water absorption was zero, linear shrinkage was 8.03%, and 8.48%, power factor was 0.136% and 0.062%, dielectric loss was 0.0072 and 0.0037. When we used barium carbonate made into frit as flux, the quantity of this flux was 0.02mole, sintering temperature was continued for 2hrs. at 1, 27$0^{\circ}C$. From this conditions, we could get the data whose water absoption was zero, linear shrinkage was 8.44%, power factor was 0.138%, dielectric constant was 5.69, dielectric loss was 0.0074.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.160-171
• /
• 1995

The size characteristics of lead particle which is one of the important factors associated with absorption of lead were ignored in establishing lead standard. This study was conducted to investigate distribution of lead particles by operation of industry. Aerodynamic Mass Median Diameters (MMD) of airborne lead particles in the battery and litharge manufacturing industry were $14.1{\mu}m$ and $15.1{\mu}m$, respectively. There was no significant difference between those two values(p>0.05). However, the diameters in radiator manufacturing and secondary smelting industry were $1.3{\mu}m$, $4.9{\mu}m$, respectively. Those were significantly smaller than the particle sizes in other industries(p<0.05). Total lead concentrations in the secondary smelting industry were higher than those in the battery and litharge manufacturing industry. Total lead concentrations in other industries except radiator manufacturing industry exceeded the standard of $50{\mu}g/m^3$. Only radiator manufacturing industry indicated lead concentrations significantly lower than those in other industries(p<0.05). Concentrations of lead particles smaller than $1{\mu}m$ defined as respirable fraction by OSHA's CPA model assumption were $72.4{\mu}g/m^3$ in the secondary smelting industry, exceeding $50{\mu}g/m^3$. The relationship of concentrations between total lead and lead of particles smaller than $1{\mu}m$ was log Y = 0.46 logX + 0.06(n=119, $r^2=0.44$, p=0.0001). Relationship of respirable lead concentrations between OSHA and ACGIH was significantly detected in the litharge and battery manufacturing industry(p=0.0001), but was not significant in the radiator(p=0.2720) and secondary smelting manufacturing industry(p=0.2394). As MMDs of lead particles generated in industry were small, difference of respirable lead concentration between OSHA and ACGIH became smaller. There was a significant difference between concentrations respirable lead defined by two organizations such as OSHA and ACGIH in the battery and litharge manufacturing industry. Average concentration of respirable lead by ACGIH definition was 43.3 % of total lead in secondary smelting and 48.9 % in radiator manufacturing industry, and lower fractions were indicated in battery and litharge manufacturing industry. Relationships of total lead with IPM, TPM, and RPM were significant respectively(p=0.0001) and lead concentrations by particle size could be estimated using this relationship. Linear regression equation between total lead concentration(X) and ACGIH-RPM concentration(Y) was log Y = 0.76 log X - 0.40($r^2=0.89$, p=0.0001).

• Molecular & Cellular Toxicology
• /
• v.4 no.1
• /
• pp.61-65
• /
• 2008

Although dietary intake of pregnant is supposed to have beneficial effects on development of infants, it may be harmful for fetal growth and development since specific food is a common source of toxicants including heavy metal. The purpose of this study was to investigate the association of maternal food intake and mid-pregnancy and their newborns blood lead levels. Pregnant women of 18-20 weeks of gestation were recruited from prenatal clinic in Seoul, Cheonan and Ulsan. In 422 pregnant women, dietary intake during pregnancy was assessed by a 24-hour recall method. Blood sample from pregnant (18-20 wks) and their cord blood at delivery were collected. Blood leas levels were analyzed by atomic-absorption spectrometry methods. Pregnant blood lead levels whose meat and meat products intake were in the highest quartile was significantly higher compared to the lowest quartile. Maternal meat and meat products intake was positively correlated maternal blood lead level (r=0.120, P=0.014). After adjusting for age, maternal blood lead level was positively correlated with their newborn blood lead level (r=0.303, P=0.030). As maternal food intake effects on blood lead levels of pregnant, careful regulation of food intake during pregnancy is perceives to be important in order to bring about desirable pregnancy outcomes.

• Journal of Environmental Health Sciences
• /
• v.42 no.3
• /
• pp.205-212
• /
• 2016

Objectives: The objective of this study was to evaluate the distribution of blood lead concentrations of residents in the areas surrounding an industrial complex. Methods: During the three-month period from August to October 2012, informed consent was obtained from a total of 417 residents in Gwangyang and Yeosu. We collected blood samples from all subjects, and their demographic characteristics were acquired using a questionnaire. The blood samples were analyzed using an atomic absorption spectrometer and data analysis was conducted using IBM SPSS version 21.0. Results: The geometric mean concentration of blood lead in all subjects was $1.85{\mu}g/dL$. The highest (p<0.01) blood lead concentrations were in the current drinking group ($2.24{\mu}g/dL$). Blood lead concentrations in the smoking group ($0.59{\mu}g/dL$) were significantly (p<0.05) higher than those in the non-smoking group ($0.24{\mu}g/dL$). Risk assessment was performe using the Korean National Environmental Health Survey (KNEHS) as a reference. The hazard indices of blood lead in males and females were 0.65 and 0.52, respectively Conclusion: We provided baseline data for reference values of toxicity and heavy lead concentrations. Our results might be useful for further evaluation of risks due to exposure to heavy metals via oral, air, and percutaneous routes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.3
• /
• pp.158-164
• /
• 1981

Leaching of lead from glazed potteries was studied under various conditions. The amount of lead was determined by atomic absorption spectrophotometry. Lead content was tended to increase with lowering PH of the solution below pH 4, but it was not detected at above pH 6 during the storage period of six weeks. More lead was leached out from the glazed potteries with red color than those of black color at the same pH. No lead was detected when the medicine-boiling pots were boiled with water or $4\%$ acetic acid solution for six hours. A significant accumulation of lead, however, was shown in Kimchi and mixed solutions of organic acids when they stored in the glazed potteries more than three weeks, although they appeared lead-free by the Korean Industrial Standard Test Method.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.204-212
• /
• 1995

The graphite furnace atomic absorption spectrophotometric determination of trace lead in water samples was studied using matrix modifiers. In order to modify the sample matrix, the type and optimum amount of the modifier were investigated with a given concentration of Pb solution. In fact, if the matrix is not modified, lead has low ashing and atomization temperatures as to give a low absorbance with bad reproducibility because of its volatility. Therefore, optimum modifiers should be used to stabilize the atomization. In this work, the ashing and atomization temperatures were raised from 400 and $1800^{\circ}C$, to 1,000 and $2000^{\circ}C$, by the addition of palladium to 50 ng/mL lead solution as a modifier. The concentration of palladium was 5.0 ${\mu}g/mL$ in the modified solution. Furthermore, if 1.5 ${\mu}g/mL$ of aluminum was mixed with the palladium modifier as an auxiliary modifier, the ashing temperature could be increased $150^{\circ}C$ additionally. With such a treatment, the sensitivity was improved more than 5 times of the solution unmodified and the reproducible results of less than 5% RSD were obtained in the samples of university's waste water and pipe-washing tap water. It could be concluded that this procedure was quantitative in the determination of trace lead from the recoveries of more than 88% obtained in the samples in which a given amount of lead was spiked.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.745-749
• /
• 1994

Animal experiments were conducted to confirm the suppressive effect of green tea on the intestinal absorption and tissue accumulation of toxic heavy metals in rats. When drinking water contaminated with 500 and 5000 times level of water quality standard for lead or cadmium was administrated to rats for 3 weeks, feed intake and body weight gain were not significantly differrent among all groups except for high cadmium group. In the relative weights of target organs, kidney and femur showed a significant difference by heavy metal administration and green tea did not influence on the weights. Green tea showed a suppressing effect on the accumulation of heavy metals in target organs, in which the reducing effect in femur was $25{\sim}45%$ for lead, and 42% for cadmium. As calcium content of femur decreased by heavy metal administration was increased in green tea group, it was concluded that heavy metal accumulation in femur was interrupted by tea beverage.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.1
• /
• pp.82-88
• /
• 1991

Determination of Cu, Fe, Ni, Pb, and Zn concentrations in coal and respirable coal dust were performed by atomic absorption spectrophotometry. The coal samples of 18 coal mines in Gangneung area were collected and 25 coal mines in Taebaek area. Crushed coal samples were divided into three mesh sizes. The results were as follows : 1. Metal concentrations of coals in Gangneung area by sieve sizes( -100/+200 mesh, -200/+325 mesh, -325 mesh) were as follows: Cu ; 20, 18, 19, Fe ; 1,830, 1,765, 1,107, Pb ; 6, 8, 14, Ni ; 17, 17, 14, Zn ; 4, 2, $4{\mu}g/g$, respectively. Metal concentrations in coals in Taebaek area by sieve sizes(-100/+200 mesh, -200/+325 mesh, -325 mesh) were as follows: Cu ; 30, 32, 26, Fe ; 1,741, 1,822, 1,773, Pb ; 8, 9, 7, Ni ; 13, 13, 13, Zn ; 8, 5, $4{\mu}g/g$, respectively. There were not significant differences of Cu, Fe, Ni, Pb, and Zn concentrations of coals statistically in Gangneung and Taebaek area by sieve size. 2. Metal concentrations of coals in Gangneung and Taeback area were as follows : Cu ; 19, 30, Fe ; 1,514, 1,778, Pb ; 9, 8, Ni ; 16, 13, Zn ; 3, $6{\mu}g/g$, respectively. Differences of copper and zinc concentrations of coal samples were significant between Gangneung and Taebaek area, but those of iron, nickel and lead concentrations were not significant. 3. Copper, iron, lead, nickel and zinc concentrations of coals and respirable coal dust were as follows : Cu ; 30, 6, Fe ; 1,779, 5,075, Pb ; 8, 7,814, Ni ; 13, 5,681, Zn ; 5, $134{\mu}g/g$, respectively. Differences of nickel, lead and zinc concentrations were significant between coals and respirable coal dust but those of copper and iron concentrations were not significant.