• 자원리싸이클링
• /
• 제27권6호
• /
• pp.23-29
• /
• 2018

최근 급속한 경제성장과 기술발달로 전기전자폐기물(WEEE)의 발생량이 꾸준히 증가하고 있으며, 이에 따라, 전기전자폐기물의 처리에 대한 중요성 또한 높아지고 있다. 이중, 인쇄회로기판(PCB)의 경우, 유가금속을 다량 함유하고 있기 때문에 친환경적이고 경제적인 재활용 방법에 관한 다양한 연구가 활발히 이루어지고 있다. 본 연구에서는 PCB스크랩으로부터 제조된 양극동의 전해정련 과정에서 발생한 양극슬라임을 활용하여 Ag 및 Au 회수를 위한 실험을 수행하였다. Ag의 경우, 3 M $HNO_3$, 100 g/L, $70^{\circ}C$로 침출하였고, 침전, 알칼리 용해, 환원 방법에 의하여 Ag를 회수하였다. Au의 경우, 양극슬라임의 질산 침출 잔사를 25% Aqua regia (왕수), 200 g/L, $70^{\circ}C$로 침출하였고, pH조정, 이온교환수지 흡착 및 탈착, 환원 방법에 의하여 Au를 회수하였다. 최종적으로 얻어진 Au, Ag의 순도는 99.99%로 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.21-32
• /
• 2019

In order to investigate the decay process of wood treated with preservative, waterproofing agent and their compound systems, a full-cell process was applied to impregnate the sapwood of poplar (Populus cathay) at paraffin wax emulsion concentrations of 0.5% and 2.0%, Copper Azole (CA) concentrations of 0.3% and 0.5%, and their four compound systems, respectively. Leaching tests and laboratory decay resistance against the white-rot fungus Corious versicolor (L.) Murrill for treated wood were carried out according to the America Standard E11-06 and China Standard GB/T 13942.1-2009. At certain time intervals during the decay test, samples were characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction technique (XRD) to investigate the time-dependent changes of chemical components and crystalline structure, thus clarifying the decay mechanisms. The results suggested that white-rot fungi degrade hemicellulose and lignin in the wood cell wall first, followed by a simultaneous degradation of polysaccharides and lignin. Besides, CA could not only slower the decomposition of both hemicellulose and lignin, but also reduce the degradation amount of hemicellulose. However, paraffin wax emulsion at high concentration had a negative effect on the impregnation of CA for the compound system treated wood.

• 자원리싸이클링
• /
• 제25권1호
• /
• pp.60-67
• /
• 2016

망간단괴 매트상 침출액 조성으로 제조 된 모의 용액(Cu 10.5 g/L, Co 2.0 g/L, Ni 15.0 g/L, Fe 0.2 g/L)으로부터 용매추출-전해채취 연속공정을 통해 구리를 분리-회수하기 위하여 규모 확대용 용매추출장치인 6단 혼합-침강기(mixer-settler : 추출 4단, 탈거 2단)와 전해조를 이용하였다. 용매추출의 경우 추출제로는 40%(v/v)의 LIX 84I, 탈거용액은 전해폐액(Cu 35.0 g/L, $H_2SO_4$ 180 g/L)을 사용하였으며 추출단과 탈거단의 O/A 비는 각각 1/1과 1.5/1 이었다. 용매추출공정의 구리의 추출율과 탈거율은 각각 96.7%와 91.0%이었으며 탈거액(전해액)의 구리, 니켈, 코발트 그리고 철의 농도는 각각 50~51 g/L, 25 ppm, 5 ppm 그리고 3 ppm 이었다. 전해채취공정은 $1.50A/dm^2$의 전류밀도에서 98.9%의 전류효율을 나타내었으며, 99.833% 순도의 금속 구리를 얻었다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 춘계학술발표회
• /
• pp.119-122
• /
• 2005

As it is known that the korean coastal fishing areas are getting contaminated by heavy metals from the sediment, the authors conducted the experiments to treat the heavy metals with bioleaching process. As a result, it is found that (1) acidification for the leaching of heavy metals is effectively processed when adding more than $0.3\%$ of sulfur and $0.1\%$ of ferrous sulfate. and (2) copper is rapidly solubilized irrespective of addition of sulfur, while solubilization is not processed even of FeS is added., and (3) bioleaching with sulfur and FeSO4 is possible method to effectively treat the heavy metals form the contaminated sediments.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.86-89
• /
• 2006

전해 생성된 염소를 이용하여 구리를 침출하는 연구를 수행하였다. 염산농도 $1molL^{-1}$, 반응온도 $25^{\circ}C$, 교반속도 400rpm 조건에서 전류밀도 $10mA/cm^{2}$의 경우 반응온도에 상관없이 구리의 침출속도가 동일하였으나 $Cl_{2}$ 생성량이 충분한 $40mA/cm^{2}$의 경우 온도가 높을수록 구리의 침출속도가 증가하였다. 침출된 구리농도가 6g/L 부근에 도달하면 염소의 공급속도에 상관없이 구리의 침출이 둔화되었다. 이는 구리-염소 착화물의 형성과 관련된 것으로 생각된다.

• 산업기술연구
• /
• 제16권
• /
• pp.169-174
• /
• 1996

Microstructural analyses of synthetic arsenic-containing heavy metal sludges solidified with Portland cement were performed. Heavy metal sludges containing 0.04M of cadmium, chromium, copper, lead, and arsenic were prepared by sodium hydroxide precipitation and successive vacuum filtration. The sludges mixed with cement were cured for 14 days. The solidified sample was characterized by 1) leaching test, 2) scanning electron microscopy and 3) X-ray diffractometry. Of the metals tested, only Pb concentration in the leachate exceeded the Korean regulatory limit. The level of lead in the leachate was as high as 10 times the regulatory limit. X-ray analysis suggested that the metal hydroxides might be present in complex or impure crystalline phases.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.375-380
• /
• 2001

MF is a half shaft blast furnace which has been developed at Mitsui Miike Smelter in the 1960’s to treat vertical retort residue. The MF has also been tested for treatment of various recycling materials and wastes. Now various secondaries and wastes (EAF dust, zinc leaching residue, Cu sludge, etc ) are mainly treated. Powder materials are briquetted with reductant before being fed to the furnace. Products are crude zinc oxide, matte, non-hazardous slag and steam. Zinc and lead are recovered in oxide dust, and copper and silver are recovered in matte. The MF can be widely applied to many kinds of materials which contain such non-ferrous metal-valuables. In addition, the improvement in operation and technology has effectively made the unit capacity much larger. The MF now has many advantages for these treatment processes.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권1호
• /
• pp.1-9
• /
• 1997

We investigated the depth profiles of heavy metals in the surface sediments at Heedong reservoir in Pusan. Sampling was done at the intervals of 50 m of drift along the water channel into the reservoir. All samples were analyzed with an ICP-AES. We determined the content of Zn, Pb, Cd, Mn, Cu, Cr, and Fe. The overall mean content of these heavy metals were observed to $(2.9\pm1.2){\times}10^{-3},\;(1.3\pm0.7){\times}10^{-3},$ $(1.9\pm2.1){\times}10^{-4},$ $(2.3\pm1.1){\times}10^{-2},\;(1.6\pm1.0){\times}10^{-3},\;and\;(4.5\pm2.6){\times}10^{-4}$ ppm/ppmFe, respectively excluding iron data. Mean contents of Cu show an increasing trend toward the surface of sediments, while those of Cd show a decreasing trend, and those of Pb and Cr are relatively stable. Comparing with the contents of heavy metals in soils at two sites of Kumjeong mountain, enrichment factors of heavy metals in the surface sediments were determined. Among heavy metals we investigated, copper showed the largest value of enrichment factor. Considering the maximum content of heavy metals in the surface sediment, the values of enrichment factors of Cu, Cd and Cr were significant, which were 22, 8.1 and 4.0, respectively. In leaching experiment, it appeared that Pb, Cd, Cr, and Fe in sediments were hardly leached out into water, We also examined the effect of pH on the content of heavy metals.

• 한국환경과학회지
• /
• 제1권1호
• /
• pp.1.2-9
• /
• 1992

We investigated the depth profiles of heavy metals in the surface sediments at Haedong reservoir in Pusan. Sampling was done at the intervals of 50 m of drift along the water channel into the reservoir. All samples were analyzed with an ICP-AES. We determined the content of Zn, Pb, Cd, Mn, Cu, Cr, and Fe. The overall mean content of these heavy metals were observed to $(2.9{\pm}1.2){\times}10^{-3}$, $(1.3{\pm}0.7){\times}10^{-3}$, $(1.9{\pm}2.1){\times}10^{-4}$ $(2.3{\pm}1.1){\times}10^{-2}$ $(1.6{\pm}1.0){\times}10{-3}$, and $(4.5{\pm}2.6){\times}10^{-4}$ ppm/ppm Fe, recpectively excluding iron data. Mean contents of Cu show an increasing trend toward the surface of sediments, while those of U show a decreasing trend, and those of Pb and Cr are relatively stable. Comparing with the contents of heavy metals in soils at two sites of Kumjeong mountain, enrichment factors of heavy metals in the surface sediments were determined. Among heavy metals we investigated, copper showed the largest value of enrichment factor. Considering the maximum content of heavy metals in the surface sediment, the values of enrichment factors of Cu, Cd and Cr were significant which were n, 8.1 and 4.0, respectively. In leaching experiment, it appeared that Pb, Cd, Cr, and Fe in sediments were hardly leached out into water. We also examined the effect of pH on the content of heavy metals.

• 자원리싸이클링
• /
• 제31권1호
• /
• pp.12-20
• /
• 2022

폐리튬이온전지를 용융환원시키면 구리, 코발트, 철, 망간, 니켈 및 규소를 함유한 금속합금을 얻는다. 금속합금의 황산침출용액에서 상기 금속을 분리하기 위한 공정을 개발하여 발표하였다. 이 공정에서는 철(III)과 구리(II)를 분리하기 위해 이온성액체를 사용하였다. 본 연구에서는 이온성액체를 대체하기 위해 D2EHPA와 Cyanex 301을 추출제로 사용했다. 철(III)과 구리(II)는 황산침출액으로부터 0.5 M의 D2EHPA에 의한 3단의 교차추출 및 0.3 M의 Cyanex 301로 분리하는 것이 가능했다. 유기상으로부터 철(III)과 구리(II)의 탈거는 각각 50%와 60%의 왕수로 가능했다. 연속실험의 물질수지로부터 금속의 회수율과 순도는 99%이상으로 확인되었다.