• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.39-49
• /
• 2022

Bottom ash generated from thermal power plants is mainly disposed in landfills, from which metals may be leached by infiltrating water. To evaluate the effect of metals in leachate on soil and groundwater, we characterized bottom ash generated from burning cokes, bituminous coal, the mixture of bituminous coal and wood pellets, and charcoal powder. The bottom ash of charcoal powder had a relatively large particle size, and its wood texture was well-preserved from SEM observation. The bottom ash of charcoal powder and wood pellets had relatively high K concentration from total element analysis. The eluates of the bottom ash samples had appreciable concentrations of Ca, Al, Fe, SO₄, and NO₃, but they were not a significant throughout the batch test. Therefore, it is considered that there is low possibility of soil and groundwater contamination due to leaching of metal ions and anions from these bottom ash in landfills. To estimate the trend of various trace elements, long-term monitoring and additional analysis need to be performed while considering the site conditions, because they readily adsorb on soil and aquifer substances.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2008

This study was conducted to investigate the characteristics of the leaching of metal components from CCA-treated wood during outdoor exposure. CCA-treated wood specimens were placed horizontally or buried vertically into the soil, and then exposed to the natural environment for a year. Wood samples were collected from the side of the horizontal wood specimens using a drill and saw dust samples were collected at the end of the exposure. Soil samples were also obtained around the wood specimens and at different depths of the posts. Wood and soil samples were analyzed for metals using an atomic absorption spectrometer. Monthly metal concentrations varied greatly and more metals were released when wood specimens were exposed vertically than horizontally. Arsenic was released from the wood by 80 % of the intial content. In addition, more leaching was observed from the zone below the ground than above the ground, and soil around the posts was contaminated with metals released from CCA-treated wood.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.187-193
• /
• 1992

The effects of continuous restoration of sludge into the reclamating paddy soil and leaching test of sludge components by soil column were investigated. 1. The contents of nitrogen, phosphorus, potassium, C.E.C. and organic matter(O.M.) were increased in/on the paddy soil treated with paper mill sludge than non-treated. 2. Humic layer depth recognized by color showed the non-treated(10 cm), second year(15 cm) and third year(20 cm), respectively. 3. The effects of sludge treatment showed in the contents of O.M. such as non-treatment(0.9 %) < second year(1.39 %) < third year(1.75 %) in 10 cm depth. 4. All components in soil tested with column were increased by holding capacity of sludge, and the contamination effects of soil and ground water were not found by leaching test.

• Journal of Radiation Protection and Research
• /
• v.33 no.4
• /
• pp.143-150
• /
• 2008

In this study, we examined the effect of hydroxyl radical generated by $\gamma$-ray and UV irradiation on shrinkage of vitreous body. Change in gel ratio of vitreous body and change in the properties of its components (collagen, sodium hyaluronate) were analyzed. By comparing these results, the amount of hydroxyl radical, which induces the considerable shrinkage of vitreous body, was evaluated from theoretical calculation based on experimental condition and some reported kinetic parameters. It was concluded that the integrated amount of hydroxyl radical required to liquefy half of the vitreous body (Vitreous body gel ratio = 50%) was estimated as $140\;{\mu}molg^{-1}$ from $\gamma$-ray irradiation experiment. Also, from UV irradiation experiment result, it was confirmed that the effect of hydroxyl radical is larger than that of other reactive species. The causes of shrinkage of vitreous body are supposed as follows, 1) decrease in viscosity by cleavage of glycoside bond in sodium hyaluronate, 2) leaching of collagen from vitreous body and 3) leaching of crosslinked products and scission products of collagen.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.3
• /
• pp.127-131
• /
• 2006

The efflorescence mechanism of ceramic bodies with different sintering temperature was studied by quantitative analysis for the effect of various metal ions and anions. SEM and EDS characterization for efflorescence formed on the surface of the ceramic body showed that the main components of the efflorescence were Ca and S atoms. Leaching concentrations of various metal ions and anions for the ceramic bodies prepared by wet mixing with pH 7 and pH 10 were evaluated by ICP and IC analysis. The results of leaching test showed that the concentration of Ca ion at pH 7 body was eight times more than that of pH 10 body. Ca-rich efflorescence was not formed on the surface of ceramic body which prepared at pH 10 and sintered over $1100^{\circ}C$.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.3
• /
• pp.218-222
• /
• 2000

Wasted${\cdot}$rested mine areas give lots of effect on around-environmental changes after mining development. Leaching water at reclaimed land has been eluted from the solid components through physical, chemical, biological procedures by waters percolated through reclaimed site. The element analysis of waste tungsten ore tailing, leaching water analysis and removal of heavy metal by zeolite were performed to investigate the influent of acid rain on the released contents of H. M. The heavy metal contents in leaching water were determined to be As $1.21\;{\sim}\;1.54\;ppm$, Pb $0.11\;{\sim}\;0.15\;ppm$ and $SO_4\;^{2-}$ was $302\;{\sim}\;378ppm$. As deionized water and simulated acid rain (pH 3,4) were percolated through columns packed tungsten ore tailing, the amount of Mn, Na, Ca which were dissolved by pH4 solution was higher than those by distilled water. However, W and Mo were eluted easily by high pH solution. The change of heavy metal concentration by column experiment packed zeolite was effective a little because heavy metals were adsorved much more by zeolite.

• Resources Recycling
• /
• v.33 no.3
• /
• pp.21-29
• /
• 2024

Globally, the demand for electric vehicles (EVs) is surging due to carbon-neutral strategies aimed at decarbonization. Consequently, the demand for lithium-ion batteries, which are essential components of EVs, is also rising, leading to an increase in the generation of spent batteries. This has prompted research into the recycling of spent batteries to recover valuable metals. In this study, we aimed to selectively leach and recover lithium from the cathode material of spent LFP batteries. To enhance the reaction surface area and reactivity, the binder in the cathode material powder was removed, and the material was subjected to heat treatment in both atmospheric and nitrogen environments across various temperature ranges. This was followed by a mechanochemical process for aqueous leaching. Initially, after heat treatment, the powder was converted into a soluble lithium compound using sodium persulfate (Na₂S₂O₈) in a mechanochemical reaction. Subsequently, aqueous leaching was performed using distilled water. This study confirmed the changes in the characteristics of the cathode material powder due to heat treatment. The final heat treatment in a nitrogen atmosphere resulted in a lithium leaching efficiency of approximately 100% across all temperature ranges.

• Resources Recycling
• /
• v.30 no.2
• /
• pp.24-30
• /
• 2021

Dismantling tests were performed to separate components from waste printed circuit boards (PCBs) using HCl solution with Sn4+. Then, the effects of agitation speed, reaction temperature, initial Sn4+ concentration, and HCl concentration on the dismantling of components were investigated. No significant effect on the dismantling speed was observed upon changing the agitation speed from 100 to 300 rpm. However, the dismantling rate increased with increasing reaction temperature, Sn4+ concentration, and HCl concentration. In the all-component dismantling tests, when the dismantling ratio increased to 100%, no solder was observed on the boards, and the Sn4+ concentration was ~1,500 mg/L. The dismantling ratio of the components from the PCB increased to 100% within 2 h when 1 mol/L HCl solution with 10,000 mg/L Sn4+ was used at an agitation speed and temperature of 200 rpm and 90 ℃, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.307-314
• /
• 1989

Barley, garlic, and soybean were cultivated in the silt loam, sandy loam, and loam, respectively, and the absorbing patterns of N, P, and K during growing of the crops were determined. While, the leaching of N, P, and K applied in the above soils in four levels of topsoil depths and in four leachate levels of excess precipitation was measured through the column. The depths of the soil were devised to 20, 35, 50, and 65cm, and the levels of excess water were classified to each leachate of 20, 40, 60, and 80mm precipitation, and nitrogen, phosphorous, and potassium in each fraction of the leachate were analyzed. By the analyses of the chemical components during growth of the crops, their absorbing patterns of N, P, and K were investigated. The order of N-leachings in the soils was sandy loam > loam > silt loam, and the leaching of $K_2O$ was very similar to N. The leaching of $P_2O_5$ was slight in all kinds of the soils. By the combination of the absorbing patterns of the crops in three kinds of soils and the leaching of the nitrogen in four levels of soil depth and four levels of excess precipitation, the method to replace the nitrogen lost by leaching was presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.906-913
• /
• 2015

The red mud generated from the Bayer alumina production process seriously threatens the environment and human safety. Therefore, the reduction and recycling of red mud is an urgent topic in the aluminum industry. In this study, the effects of four parameters, ultrasound power, reaction temperature, time, and acid concentration, on the leaching of Fe, Al from red mud was investigated. The major parameters influencing the metal recovery efficiency from red mud were ultrasound power and reaction temperature. The use of ultrasonic irradiation resulted in 1.72 and 1.28 times higher recovery efficiency for Fe and Al, respectively. The proper conditions for the recovery of the metal components present in the red mud is the ultrasound intensity (150 W), sulfuric acid concentration (4-6N), reaction temperature ($70^{\circ}C$), and reaction time (2 hours), etc.