• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.421-426
• /
• 2001

The pneumatic classification and acidic leaching behaviors of phosphor sludge have been examined to establish the recycling system of rare earth components contained in waste fluorescent lamp. At first, separation characteristic of rare earth components and calcium phosphate in phosphor sludge was investigated by pneumatic classification. After pneumatic classification of phosphor sludge, rare earth components were leached in various acidic solutions and sodium hydroxide solution. For recovery of soluble component in leaching solution, rare earth components were separated as hydroxide and oxalate precipitations. The experimental results obtained are summarized as follows: (1) In classification process, rare earth components in phosphor sludge were concentrated to 29.3% from 13.3%, and its yield was 32.9%. (2) In leaching process, sulfuric acid solution was more effective one as a leaching solvent of rare earth component than other solutions. Y and Eu components in phosphor sludge were dissolved in sulfuric acid solution of 1.5 k㏖/㎥, and other rare earth components were rarely dissolved in leaching solution. Leaching degrees of Y and Eu were respectively 92% and 98% in the following optimum leaching conditions; sulfuric acid concentration is 1.5 k㏖/㎥ , leaching temperature 343 K, leaching time 3.6 ks and pulp concentration 30 kg/㎥. (3) Y and Eu components of phosphor sludge contained in waste fluorescent lamp were, effectively recovered by three processes of pneumatic classification, sulfuric acid leaching and oxalate precipitation methods. Their recovery was finally about 65 %, and its purity was 98.2%.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.87-94
• /
• 2005

This study was carried out to investigate the effect of soil types and soil properties on wood preservative leaching. Radiata pine (Pinus radiata Don.) sapwood stakes, which had been treated with 2.0%(w/v) CCA, were leached for 12 weeks by a common laboratory method in four different soils and for 14 days by the AWPA standard leaching method in water. The physical and chemical properties of the four soils were determined, and the percent leaching of the individual component of CCA was correlated with the various soil properties. The data show that leaching of preservative chemicals from treated wood exposed to soil is influenced by the type of soil. The preservative leaching was greater when wood was exposed to water than when the wood was in contact with water-saturated soil. The greatest chromium, copper and arsenic leaching from CCA-treated stakes were observed in the sandy loam, loam, and sand, respectively, and the least amount of leaching of CCA components occurred in the silty loam. The leaching of preservative components from treated wood is extremely complex and appears to be influenced differently by the soil properties. The extent of copper leaching from CCA treated wood appears to be related to exchangeable Mg and sum of bases. There is a reasonably good relationship between chromium leaching and exchangeable Mg, and between arsenic leaching and exchangeable K, soil Ni, Mn, Fe, Cr, or Cu content. Since this study was conducted based on laboratory leaching method using small cross-sectional dimensions; thus, data obtained from this experiment should not be used to predict leaching characteristics from commercial-size wood used in real situation. Accordingly, further studies are necessary using outdoor ground-contact leaching.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.73-79
• /
• 1997

Removal of the Arsenic components from the closed mine tailings has been attempted by the alkali-leaching method. Two tailings collected from the Daduck and Yuchon mine which were already closed many years ago were leached with caustic soda solutions. The Arsenic components in the leach liquor resulted from the alkali treatment of tailings could be removed fairly well in the form of insoluble calcium-Arsenic compound by the precipitation with calcium chloride. As a result, the extraction of about 60~90% Arsenic from the tailings could be obtained depending on the leaching conditions and the influence of temperature and the slurry density on the extraction of Arsenic was also found to be very small at the NaOH concentration more than 0.5N. In addition, it seemed that a caustic soda solution over 0.5N NaOH could be used repeatedly for the leaching of tailings since the consumption of NaOH was not so great in a leaching of them. As far as the precipitation of Arsenic components was concerned, more than 99% of Arsenic could be precipitated within 10 minutes by the addition of 2wt% CaC12 in to the leach liquor.

• Journal of Korea Soil Environment Society
• /
• v.3 no.2
• /
• pp.53-60
• /
• 1998

The influence of venting on the leaching characteristics of pure gasoline and gasoline contaminated soil was studied. The change of leaching characteristics by venting of contaminated soil column could be characterized by two distinct trends : 1) the leaching concentration in TPH-GRO rapidly decreased with evaporation until the evaporation loss became 75% of the original volume. Afterwards, it gradually decreased. 2) the leaching concentrations of individual components showed initial increase followed by gradual decrease. In general, the relative increase of leaching concentration and the venting time to reach the maximum increased with the molecular weight of the components. It should be noted that the decrease of gasoline concentration in the vented air occurs faster than that in the leaching solution. This indicates that, after removing most of the gasoline by evaporation, the focus of the risk assessment for the residual contaminants should be on the groundwater contamination rather than air pollution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.66-71
• /
• 2008

This study was conducted to predict optimum leaching conditions for functional components of black tea. Two variables were used to determine the optimum leaching temperature and leaching time with a five-level central composite design and response surface methodology. Soluble solid, reducing sugar, total phenolics, and total flavonoid contents increased as leaching temperature and time increased. The ranges of maximum leaching conditions for these components were $78.28{\sim}87.08^{\circ}C$ and $3.97{\sim}4.27min$. Vitamin C level was maximal at $61.29^{\circ}C$ and 2.68 min. Electron donating ability showed the highest values at $68.30^{\circ}C$ and 0.54 min. Based upon the superimposed results, it was predicted that the optimal ranges of leaching conditions for some functional components from black tea were $63{\sim}79^{\circ}C$ for $1.5{\sim}2.1$ min.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.58-64
• /
• 2017

Leaching of black dross with HCl solution was conducted to find a suitable process to recover valauble materials. In this work, the leaching behavior of the components was compared between black dross and the residues after water treatment. All the components except $TiO_2$ in the black dross were dissolved by HCl solution in the experimental ranges. Treatment of the black dross with water to recover the salts has negative effect on the leaching of $Al_2O_3$, MgO and $SiO_2$. The reactions occuring during the leaching were discussed. At an optimum leaching condition of 3 M HCl and $90^{\circ}C$, the leaching percentage of $Al_2O_3$, MgO and $SiO_2$ was 85, 100 and 40%, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.88-93
• /
• 2006

To recycle the electric arc furnace (EAF) dust as a ceramic raw materials, the leaching concentrations of heavy metals (Zn, Pb, Cr, Cd) were analysed with various pH and mixing ratios for EAF dust and EAF dust-clay mixtures. The evaporation amounts of the some heavy metals were evaluated by measuring their total concentrations in the sintered bodies of EAF dust-clay mixtures with various mixing ratio and sintering temperature. Toxicity characteristic leaching procedure (TCLP) test was conducted for evaluating the chemical stabilities of the heavy metal elements. Leaching concentrations of heavy metal ions shows minimum leaching concentration at the pH 10. Evaporation amount of heavy metals in the sintered bodies were evaluated for the mixtures of pH 10 depenidng on mixing ratio and sintering temperature. Evaporation of heavy metal components were increased with increasing the sintering temperature and contents of the EAF dust. The evaporation of the heavy metal components in EAF dust was effectively suppressed by increasing the clay content. The leaching concentrations of heavy metal components were decreased with increasing clay content and temperature.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.478-481
• /
• 2001

The spent petrochemical catalyst used in the manufacturing process of terephthalic-acid contains valuable metals such as cobalt and manganese. To recover these metals, sulfuric acid leaching was performed with hydrogen peroxide as a reducing agent. Low extractions of Mn, Co and Fe were obtained by sulfuric acid leaching without reducing agent. With adding hydrogen peroxide as a reducing agent, the high extraction of these metals could be obtained. Different from general leaching experiment, the extraction rates of metal components were decreased with increasing reaction temperature in this case. Under the optimum condition, the extraction rates of Mn, Co and Fe were 93.0%, 87.0% and 100% respectively.

• Journal of Environmental Science International
• /
• v.12 no.3
• /
• pp.325-335
• /
• 2003

An agricultural land application of swine slurry is one of the best management practices in Jeju island whose ground water must be protected. So as to study the effect of appling swine slurry on ground water or aquifer, incubation-leaching technique was used by assuming the incubating period of 1, 2, 4, 8, 16, or 32 days, and application rate of 3200.0 mgT-N/$\ell$ , 820.0 mgT-P/$\ell$, and 1887.0 mgK$\^$+/$\ell$ in swine slurry. The leachates were collected from the soil columns(PVC 30 cm L${\times}$5.5 cm D) packed 15cm in depth with Gangjeong soil series by washing with 100 mL distilled water. The leached components were measured by using ion chromatography far Cl$\^$-/, NO$_3$-N, F$\^$-/, Br$\^$-/, Na$\^$+/, K$\^$+/, Ca$^2$$\^$+/, and Mg$^2$$\^$+/ , atomic absorption spectrophotometry for Fe and Mn, and UV-Vis spectrophotometry for T-N and T-p. Application of swine slurry in naked soil could influence on the ground water or aquifer by increasing nitrate-nitrogen in leachate with time, or leaching the cations present in soils in accompany with anions because of H$\^$+/produced in nitrification. Therefore, careful consideration should be taken about what amount, when, where, and how fur protecting ground water system.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.25-30
• /
• 2010

Leaching of CMSX-4 superalloy was done in hydrochloric acid solutions. The leaching behaviors of main alloy components, such as Ni, Co, Cr, Al, was investigated by controlling acid concentration, temperature, leaching time and pulp density. Increasing acid concentration enhanced the leaching rate till the rate decreased over 3 M acid concentration. Raising temperature increased the leaching amount of the metal components. After the leaching for 60 minutes at $90^{\circ}C$ and 10 g/L pulp density in 4 M acid solution, 93.2% nickel, 89.9% aluminum, 80.4% cobalt, and 79.1% chromium were leached. Nickel and aluminum were preferentially leached out, while the leaching rate of cobalt and chromium were relatively high only after 60 minutes, Increasing pulp density lowered the leaching rate and especially serious on cobalt and chromium, The optimum leaching condition for CMSX-4 was obtained at $90^{\circ}C$, 120 minutes, and less than 125 g/L in 4 M hydrochloric acid solution.