• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.230-238
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64) and tool kit on the ESPRIT. Transference of data among AutoCAD, I-DEAS Master Series Drafting, and ESPRIT is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of six modules, which are input and shape treatment, production feasibility check, strip-layout, die-layout, modelling, and post-processor modules. The system can design process planning and Die design considering several factors and generate NC data automatically according to drawings of die-layout module. As forming process of high precision product and die design system using 2-D geometry recognition are integrated with technology of process planning, die design, and CAE analysis, standardization of die part in die design and process planning of high pression product for semiconductor lead frame is possible to set. Results carried out in each module will provide efficiencies to the designer and the manufacturer of lead frame, semiconductor.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.909-912
• /
• 2005

According to miniaturization trend of rehabilitation medical equipment such as hearing aid, study to replace previous complex system with semiconductor SOC (System-on-Chip) chip becomes lively. In this study, after investigating of existent hearing aid performance in circuit design approach, low electric power consuming, single power supply (1.4V battery) CMOSS OP AMP was designed. Analog circuit design tools such as Hspice and Cadence were used for circuit simulation and implementing layout design. This study shows technical methods particularly for layout design. The work is done in pmos and nmos active element layout design in addition to passive element design such as resister, capacitor and inductor.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 추계학술대회
• /
• pp.505-510
• /
• 2005

The manufacturing industries which played a major role in the rapid economic growth and industrialization of Korea in the late 20th century had considerable difficulties changing their manufacturing conditions from producer-oriented conditions to customer-oriented ones according to market changes. In this study, increase plant efficiency because grafts together modular system to plant layout and analyzes Work In Process(WIP) between product's cycle time and each process, family efficient plan wishes to choose opposite bank. Simulation approach used for presented methodology The effect will not gain the results for other reasons the inherent conditions of companies, people, and culture which have been hitherto described, but will be expected to help the direction for a new Lay-out production system to reflect on the native conditions rather than fixed technological means and methods in way of an analysis of fundamental problems which small and medium companies in Korea face.

• 대한산업공학회지
• /
• 제38권1호
• /
• pp.7-16
• /
• 2012

Manufacturing system design poses many challenges for new factory construction. Factories producing the same product may nevertheless have different layouts. The machining line of the engine shop in an automotive factory is a typical flow line, but the layout concept of the line varies among factories. In this paper, a simulation study on the design concept of the manufacturing system for automotive engines is discussed. For comparison, three types of real engine block lines in different factories are analyzed, and three structures of parallel lines are extracted. The effects of failure distribution on the performance measures of three types of parallel line structures are investigated, and some insights are offered regarding the layout concept.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.180-187
• /
• 1996

This paper describes a post-layout simulation method using VHDL and C for verifying the architecture of antifuse-based FPGAs and the dedicated CAD system. An antifuse-based FPGA consists of programming circuitry including decoding logic, logic modules, segmented tracks, antifuses and I/O pads. The VHDL model which includes all these elements is used for logic verification and programming verification of the implemented circuit by reconstructing the logic circuit from the bit-stream generated from layout tool. The implemented circuit comprises of logic modules and routing networks. Since the routing delay of the complex networks is comparable to the delay of the logic module in the FPGA, the accurate post-layout simulation is essential to the FPGA system. In this paper, the C program calculates the delay of the routing netowrks using SPICE, elmore or horowitz delay models and the results feedback to the VHDL simulation. Critical path anc be found from this post-layout simulation results.

• 한국산업정보학회논문지
• /
• 제13권5호
• /
• pp.142-148
• /
• 2008

Facility Layout Planning is concerned with how to arrange facilities necessary for production in a given space. Its objective is often to minimize the total sum of all material flows multiplied by the distance among facilities. FLP belongs to NP complete problem; i.e., the number of possible layout solutions increases with the increase of the number of facilities. Thus, meta heuristics such as Genetic Algorithm (GA) and Simulated Annealing have been investigated to solve the FLP problems. However, one of the biggest problems which lie in the existing meta heuristics including GA is hard to find an appropriate combinations of parameters which result in optimal solutions for the specific problem. The Ant System algorithm with elitist and ranking strategies is used to solve the FLP problem as an another good alternative. Experimental results show that the AS algorithm is able to produce the same level of solution quality with less sensitive parameters selection comparing to the ones obtained by applying other existing meta heuristic algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.545-548
• /
• 1988

This paper describes the advanced KUIC_LED which is a 2-dimensional graphics editor for IC mask layout. This system runs on IBM PC/AT with the ${\Omega}$/PC graphics board. Though this system runs on PC, it offers about fifty commands to do most kinds of layout and 16 mask layer. KUIC_LED(${\Omega}$/PC_VERSION) is written in C language.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.38-44
• /
• 2005

Many mid-sized companies in Korean automotive industry have attempted to solve the lack of human power, to control the quality of components, to improve the production rate, and to innovate the manufacturing line. The goals of this study are to analyze the production rate of an automotive component manufacturing line using simulation software, to construct a Flexible Automation Subassembly (FAS) system and to suggest an optimized layout design using FAS line. In this research, the simulation model for manufacturing line was developed and used the realistic data of a medium sized company in Korean automotive industry. To complete this research, a simulation software 'ARENA' was used. This research analyzed the work distribution strategy and cycle time element for production flow and proposed an optimized layout to resolve line balancing problem which would bring the improved production rate.

• 건축역사연구
• /
• 제32권4호
• /
• pp.51-62
• /
• 2023

Gyeongbokgungdo depicts the composition and layout of Gyeongbokgung Palace before the Japanese Invasion of Korea in 1592, as well as a monument related to pro-jamrye held at the site of Gyeongbokgung Palace in Yeongjo. Based on literature such as Dongguk Yeoji Seungram, such as Gyeongbokgungdo painted major buildings, government offices, and buildings in the backyard. In addition, the literature and the foot of the mountain, waterway, and Pond, which were identified as the site identified during the reconstruction process, are reflected, and some of the Gyeongbokgungdo contain reconstruction records. As such, Gyeongbokgungdo depicts Gyeongbokgung Palace in the early Joseon Dynasty and facilities built after the Imjin War based on the literature, and seems to have been produced around the time of reconstruction as it reflects the mountain and water system. In addition, the layout of the main hall of Gyeongbokgungdo was partially reflected in the reconstructed Gyeongbokgung Palace and used as a material to understand the layout of Gyeongbokgung Palace in the early Joseon Dynasty.