• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.491-496
• /
• 2006

Antimicrobial activity of 18 different traditional medicinal herbs extracts against Staphylococcus aureus was determined by a paper disc method. The Prunella vulgaris, Caesalpinia sappan and Rhus javanica extracts in 5 mg/ml, Poncirus trifoliata, Lonicera japonica and Seutellaria baicalensis extracts in 10 mg/ml and Schizandra chinensis, Alpinia katsumadai, Siegesbeckia orientalis extracts in 30 mg/ml showed a significant antimicrobial activity against Staphylococcus aureus. Minimum inhibitory concentrations of medicinal herbs extracts were in the range of $1{\sim}34\;mg/ml$ and $1{\sim}46\;mg/ml$, in the case of MeOH extracts and EtOH extracts, respectively. In addition, the antimicrobial activity of each solvent fraction was most significant with EtOAc layer. Optical density at 620nm after 24 hours incubation of Staphylococcus aureus in the presence of 100, 300 or 500 ppm of Caesalpinia sappan extract ranged from 0.02 to 0.03 compared to 0.4 in the absence of Caesalpinia sappan extract, indicating that growth of Staphylococcus aureus was significantly inhibited within 24 hours by the addition of at least 100 ppm of Caesalpinia sappan extract. Optical density at 620 nm after 24 hours incubation of Staphylococcus aureus in the presence of 300 ppm of Rhus javanica extract ranged from 0.02 to 0.03 compared to 0.4 in the absence of Rhus javanica extract, indicating that growth of Staphylococcus aureus was also significantly inhibited within 24 hours by the addition of at least 300 ppm of Rhus javanica extract. Optical density at 620 nm after 24 hours incubation of Staphylococcus aureus in the presence of 300 ppm of Seutellaria baicalensis extract ranged from 0.02 to 0.07 compared to 0.4 in the absence of Seutellaria baicalensis extract, indicating that growth of Staphylococcus aureus was also significantly inhibited within 24 hours by the addition of at least 300 ppm of Seutellaria baicalensis extract. In conclusion, these findings suggest that extracts from medicinal herbs may play important roles for antimicrobial activities against Staphylococcus aureus.

• Korean Journal of Environment and Ecology
• /
• v.10 no.1
• /
• pp.1-13
• /
• 1996

This study was conducted to investigate the avifauna and to suggest the management discipline for the protection of bird community in Odaesan National Park. Field survey was carried over 2 main trails by line transect method from mid June to early December in 1996. The 1st section included the area from Woljongas to Sangwonsa 7km distance. The 2nd section survey started from Sangwonsa via Bukdaesa and the summit of Odaesan to Sangwonsa 9.8 km distance. The study results were as follows ; The observed birds belonged to 9 orders 22families 52species, they also had Black Woodpecker(Dryocopus martius)designated as natural monument No. 242, Chinese Sparrow Hawk(Accipiter soloensis) and Kestrel(Falco tinnunculus) as natural munumet No. 323, Scops Owl(Out scops)and Korean Wood Owl(Strix aluco) as No. 324. These birds also were classified into 25 species for residents, 16 species for summer visitors, 8 species for passage migrants, 3 species for winter visitors, respectionely. The 2nd section showed a high species richness and individuals in every season, however, had a difference in species composition with 1st section. Nesting guild of breeding bird community used highly in order of bush, hole, and canopy as a nest resources. It is suggested that high bush-nesting guild had a deep relationship with bush layer located in the ecotone of 1st section and that located in the high elevated zone in 2nd section. Hole-nesting guild such as Black Woodpecker(Dryocopus martius), Gray-headed Woodpecker(Picus canus) and Great Spotted Woodpecker(Dendrocopos major) were surveyed only in 2nd section, so it could be attribute to the small fragmentation and the growing of high diameter at breast height(D.B.H) tree in 2nd section. It is urgent that the management of camping ground and people for the conservation of brook in 1nd section, trail protection for the prevention from trail enlargement in 2nd section for the bird protection. Artificial food in snowy winter will provide the good breeding condition with the residents and migrants. And, the endeavor to lessen the habitat fragmentation will be beneficial to the birds who have a large home range such as Black Woodpecker(Dryocopus martius) and Korean Wood Owl(Strix aluco). For the control of Domestic Dove(Columba livia) populations, it could be recommended that the elimination of their nesting resources by net.

• Korean Journal of Environment and Ecology
• /
• v.24 no.6
• /
• pp.708-722
• /
• 2010

This study was carried out to classify vegetation structure of the Hyangjeokbong in the Deogyusan National Park using the gradient analysis and phytosociological method. The vegetation was classified into Quercus mongolica community(Rhododendron schlippenbachii subcommunity, typical subcommunity), Q. serrata community, Q. variabillis community, Pinus densiflora community, Cornus controversa community, Fraxinus mandshurica community and Taxus cuspidata community. Ecological characteristics such as species composition, layer structure, vegetation ratio, and the distribution of individual trees by DBH(diameter at breast height) were significantly different among communities. The order of important value of the forest community with DBH 2cm above plants was Q. mongolica(81.2), F. mandshurica, Q. serrata, P. densiflora, Acer pseudosieboldianum, Q. variabillis, Rhododendron schlippenbachii, C. controversa, T. cuspidata. Distribution of DBH of Q. mongolica and Q. serrata had suggesting a continuous domination of these species over the other species for the time being. In contrast, F. mandshurica appeared limited to the valley of the sheet and a higher frequency of young individuals, suggesting a continuous domination of these species the development of a climax forest terrain. P. densiflora and T. cuspidata had suggesting a continuous domination of these species over the other species for the time being in maintain. Q. variabilis and C. controversa had a formality distribution, suggesting a continuous domination of these species over the other species for the time being. This study examined the correlation between each community and the environment according to DCCA ordination. The Q. mongolica community and T. cuspidata community predominated in the highest elevation habitats which had few moisture, Ca and in the low pH. The Q. serrata community mainly occurred in the low elevation habitats which had many moisture. P. densiflora community predominated in the middle elevation and south-facing slope habitats which had few moisture, Ca and in the low pH. F. mandshurica community predominated in the low elevation habitats which had many moisture, Ca and pH.

• Korean Journal of Agricultural Science
• /
• v.32 no.1
• /
• pp.43-51
• /
• 2005

This study was carried out to investigate the style of livestock house, concentration of malodorous substances of livestock feces and livestock houses in Daejeon area. Among the livestock houses investigated, as most of cow pens(94.5%) have sawdust or chaff on the bottom, there was no leakage of feces out of pen. Most pig pens adopted slury style, but some of them currently use buffering material on the bottom. It is thought that there will be no possible contamination leakage. When it comes to hen house, all the broiler house use litters on the bottom and all the layer house use scrapper. It is also thought that there will be no possible contamination leakage. 3 out of 12 deer pens used buffering material on the bottom, 10 places were maintained in a traditional method, and 7 places left possibility of contamination leakage considering whether the roof was installed or not. The contents of ammonia, amine and volatile fatty acid in fresh feces were lower compared to rotten feces, but the concentration of sulfur-containing matter - hydrogen sulfide, methylmercapthan and ethylmercapthan were higher compared to rotten feces. In the case of malodorous ingredient in livestock houses, only small amount of ammonia and hydrogen sulfide were detected in pig pen and hen house, and other ingredients were not detectable. And those who are engaged in animal husbandry reacted negatively to the use of feed additives for decreasing malodor. In conclusion, it is not worrisome that contamination can be leaked out of animal raising facilities. But if we take into consideration that the point of investigation time is wintry season, there should be more considerate attitude. And feed additives for decreasing malodor need establishing criteria in the manufacturing process.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.104-122
• /
• 2019

In the era of the fourth industrial revolution, maker education is drawing attention as a method of student-led education. At a time when interest in maker education is also growing in technology education, figuring out what stage of concern(SoC) a middle school technology teacher is critical to effective implementation. This study analyzed SoC in maker education by layer sampling among 400 middle school technology teachers using Concerns-based adoption model. SoC was then obtained by measuring the origin using the SoCQ and then presenting it as a SOCQ profile. Gender, training experience with two lower variables were analyzed using t verification, working cities, teaching experience with more than three lower variables were analyzed using one-way ANOVA. Studies showed that SoC in maker education of middle school technology teachers showed the most similar characteristics to that of non-users. The difference in concern depending on gender was that male teachers were more concerned in maker education than female teachers. The difference in concern depending on the working city was that teachers working in the township were more concerned in the maker education than teachers working in the large city, and the difference in concern depending on the teaching career was higher among teachers with middle experience than those with low and high experience. There was also a higher stage of concern in maker education than in teachers without training experience. Therefore, it is necessary to provide middle school technology teachers with an introduction to the maker education and various information, teaching, learning and evaluation data to enhance overall concern and to support the use and evaluation of the maker education in the classroom by providing various teacher training and consulting on the maker education in the future. Further, through further study, we should conduct study that analyzes both Stage of Concern, Level of Use and Innovation Configuration, to put in the effort for effective settlement of maker education.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.59-76
• /
• 2014

The revolution of smart media such as smart phone, smart TV and tablets has brought easiness for people to get contents and related information anywhere and anytime. The characteristics of the smart media have changed user behavior for watching the contents from passive attitude into active one. Video is a kind of multimedia resources and widely used to provide information effectively. People not only watch video contents, but also search for related information to specific objects appeared in the contents. However, people have to use extra views or devices to find the information because the existing video contents provide no information through the contents. Therefore, the interaction between user and media is becoming a major concern. The demand for direct interaction and instant information is much increasing. Digital media environment is no longer expected to serve as a one-way information service, which requires user to search manually on the internet finding information they need. To solve the current inconvenience, an interactive service is needed to provide the information exchange function between people and video contents, or between people themselves. Recently, many researchers have recognized the importance of the requirements for interactive services, but only few services provide interactive video within restricted functionality. Only cooking domain is chosen for an interactive cooking video query service in this research. Cooking is receiving lots of people attention continuously. By using smart media devices, user can easily watch a cooking video. One-way information nature of cooking video does not allow to interactively getting more information about the certain contents, although due to the characteristics of videos, cooking videos provide various information such as cooking scenes and explanation for each recipe step. Cooking video indeed attracts academic researches to study and solve several problems related to cooking. However, just few studies focused on interactive services in cooking video and they still not sufficient to provide the interaction with users. In this paper, an interactive cooking video query service system with linked data to provide the interaction functionalities to users. A linked recipe schema is used to handle the linked data. The linked data approach is applied to construct queries in systematic manner when user interacts with cooking videos. We add some classes, data properties, and relations to the linked recipe schema because the current version of the schema is not enough to serve user interaction. A web crawler extracts recipe information from allrecipes.com. All extracted recipe information is transformed into ontology instances by using developed instance generator. To provide a query function, hundreds of questions in cooking video web sites such as BBC food, Foodista, Fine cooking are investigated and analyzed. After the analysis of the investigated questions, we summary the questions into four categories by question generalization. For the question generalization, the questions are clustered in eleven questions. The proposed system provides an environment associating UI (User Interface) and UX (User Experience) that allow user to watch cooking videos while obtaining the necessary additional information using extra information layer. User can use the proposed interactive cooking video system at both PC and mobile environments because responsive web design is applied for the proposed system. In addition, the proposed system enables the interaction between user and video in various smart media devices by employing linked data to provide information matching with the current context. Two methods are used to evaluate the proposed system. First, through a questionnaire-based method, computer system usability is measured by comparing the proposed system with the existing web site. Second, the answer accuracy for user interaction is measured to inspect to-be-offered information. The experimental results show that the proposed system receives a favorable evaluation and provides accurate answers for user interaction.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.2
• /
• pp.74-81
• /
• 2017

An off-site consequence analysis is used to calculate the risks when hazardous chemicals that is being used on-site has been exposed off-site; the biggest factor that impacts the risk is the risks of accident scenarios. This study seeks to calculate risks according to accident scenarios by applying OGP/LOPA risk calculating methods for similar facilities, calculate risk reduction ratio by inspecting applicable IPL for incidents, and propose an appropriate risk standard for different risk calculating methods. Considering all applicable IPL when estimating the safety improvement of accident scenarios, the risk of OGP is 8.05E-04 and the risk of LOPA is 1.00E-04, According to the case of IPL, the risk is 1.34E-02. The optimal risk level for accident scenarios using LOPA was $10^{-2}$, but the appropriate risk criteria for accident scenarios in foreign similar studies were $10^{-3}{\sim}10^{-4}$, the risk of a scenario can be determined at an unacceptable level. When OGP is applied, it is analyzed as acceptable level, but in case of applying LOPA, all applicable IPL should be applied in order to satisfy the acceptable risk level. Compared to OGP, the risk is high when LOPA is applied. Therefore, the acceptable risk level should be set differently for each risk method.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• Membrane Journal
• /
• v.11 no.4
• /
• pp.143-151
• /
• 2001

We have fabricated mixed-ionic conducting membranes, L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ and L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ by the solid state method. Ceramic membranes consisted of perovskite-type structures and exhibited high relative density, >95%. Especially, dense L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ layer was coated on the L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes by using screen printing technique in order to improve oxygen ion flux. We measured oxygen ion flux on uncoated L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/, uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/, and coated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes. The L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ membranes showed the highest flux, 0.26 mL/min.$\textrm{cm}^2$ at 90$0^{\circ}C$, after steady state had been reached. The oxygen flux of coated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes showed higher value, 0.19 mL/min.$\textrm{cm}^2$ at 95$0^{\circ}C$. This flux was as much as 2 or 3 times higher than those of uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes. 3-$\delta$/ membranes.X> 3-$\delta$/ membranes.membranes.