• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.375-387
• /
• 2004

A new finite element model will be presented to analyze the nonlinear behavior of RC beams and slabs strengthened by a patch repair. The numerical approach is based on the p-version degenerate shell element including theory of anisotropic laminated composites, theory of materially and geometrically nonlinear plates. In the nonlinear formulation of this model, the total Lagrangian formulation is adopted with large deflections and moderate rotations being accounted for in the sense of von Karman hypothesis. The material model is based on hardening rule, crushing condition, plate-end debonding strength model and so on. The Gauss-Lobatto numerical quadrature is applied to calculate the stresses at the nodal points instead of Gauss points. The validity of the proposed p-version nonlinear finite element model is demonstrated through the load-deflection curves, the ultimate loads, and the failure modes of RC beams or slabs bonded with steel plates or FRP plates compared with available result of experiment and other numerical methods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.693-700
• /
• 1992

As an approach to study a new natural antioxidant for edible fats and oils, antioxidative fractions from acorn powder were characterized. The oxidative stabilities of soybean, palm, beef tallow, and lard oil containing the acorn active fraction extracted with various organic solvents were studied by determining the peroxide value during the storage at $60^{\circ}C.$ And this effective antioxidative components were isolated and identified by thin layer chromatography and high performance liquid chromatography. The proximate compositions of acorn powder were water 11.9~12.0%, protein 7.1~7.4%, starch 65.5~69.4%, fat 2.1~2.6%, fiber 2.1~3.6%, ash 2.4~2.6%, and total tannin 4.6~6.8%, respectively. The final yield of fraction extracted by sequential order of acetone : $H_2O$(1 : 1) and ethylacetate was 2.8~3.1%. Gallic acid, digallic acid and gallotannin were contained this final fraction. The main antioxidative activity was speculated due to the presence of gallic acid in acorn powder extract. The antioxidative activity was more effective in fat water emulsion than just fat system. Antioxidative activities measured by peroxide value were quite high in beef tallow and soybean emulsion, but low in lard and palm oil emulsion in the concentration of 200ppm acorn extract. Therefore, the addition of 200ppm acorn extract was suggested to expect effective antioxidation concentration in the reaction system.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2010

In the present work, an electrowinning process in the LiCl-KCl/Cd system is considered to model and analyze the electrotransport of the actinide and rare-earth elements. A simple dynamic modeling of this process was performed by taking into account the material balances and diffusion-controlled electrochemical reactions in a diffusion boundary layer at an electrode interface between the molten salt electrolyte and liquid cadmium cathode. The proposed modeling approach was based on the half-cell reduction reactions of metal chloride occurring on the cathode. This model demonstrated a capability for the prediction of the concentration behaviors, a faradic current of each element and an electrochemical potential as function of the time up to the corresponding electrotransport satisfying a given applied current based on a galvanostatic electrolysis. The results of selected case studies including five elements (U, Pu, Am, La, Nd) system are shown, and a preliminary simulation is carried out to show how the model can be used to understand the electrochemical characteristics and provide better information for developing an advanced electrowinner.

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.241-249
• /
• 2006

Due to the long tectonic history and the very complex geologic formations in Korea, the anisotropic characteristics of subsurface material may often change very greatly and locally. The algorithms commonly used, however, may not give sufficiently precise computational results of traveltime data particularly for the complex and strong anisotropic model, since they are based on the two-dimensional (2D) earth and/or weak anisotropy assumptions. This study is intended to develope a three-dimensional (3D) modeling algorithm to precisely calculate the first arrival time in the complex anisotropic media. Considering the complex geology of Korea, we assume 3D TTI (tilted transversely isotropy) medium having the arbitrary symmetry axis. The algorithm includes the 2D non-linear interpolation scheme to calculate the traveltimes inside the grid and the 3D traveltime mapping to fill the 3D model with first arrival times. The weak anisotropy assumption, moreover, can be overcome through devising a numerical approach of the steepest descent method in the calculation of minimum traveltime, instead of using approximate solution. The performance of the algorithm developed in this study is demonstrated by the comparison of the analytic and numerical solutions for the homogeneous anisotropic earth as well as through the numerical experiment for the two layer model whose anisotropic properties are greatly different each other. We expect that the developed modeling algorithm can be used in the development of processing and inversion schemes of seismic data acquired in strongly anisotropic environment, such as migration, velocity analysis, cross-well tomography and so on.

• Spatial Information Research
• /
• v.5 no.2
• /
• pp.147-160
• /
• 1997

"The "Map Algebra", beeing recognized as a viable theoretical framework for GIS (Geographica Infonnation System), models map layers as "operands" which are the basic unit of geo-processing, and a variety of GIS commands as "operators." In this paper, we attempt at lifting some limitations of map algebras proposed in GIS literature. First, we model map layer as "function" such that we may employ the notion of meta operator (or, higher-order funtion) available in the functional programming paradigm. This approach provides map algebraic language with "programmability" needed in GIS user language. Second, we extend the semantics of, and improve on the sytactic structure of map algebraic language. Mer the data model and language associated with map algebra are formalized, we proceed to design and implement a prototype of map algebraic processor. The parser of the language in our prototype plays the role of transforming the native and heterogeneous user language of current GISs into a canonical map algebraic language. The prototype, named "MapSee" is a proof-of-concept system for the ideas we propsed in this paper. We believe that the uniform interface based on the map algebraic language will make promising infrastructure to support "Internet GIS." This is because the uniform but powerful interface through the Web clients allow access to both geo-data and geo-processing resources distributed over the network.to both geo-data and geo-processing resources distributed over the network.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.84-93
• /
• 2012

Most of the studies on reduction of buildings' environmental burden in the construction industry have been focused on carbon dioxide emission, although there are various kinds of environmental issues such as global warming, acidification, and etc. which are considered by many researchers. Therefore, this study defined and suggested six impact categories and the principles to assess each impact for the assessment of comprehensive environmental impacts of buildings. The six impact categories are abiotic depletion, global warming, ozone layer depletion, acidification, eutrophication, and photochemical oxidation. A case study has been conducted through comparative analysis of two structural design alternatives to confirm the necessity of assessing the six impact categories. That is, the results of global warming potential and the six impacts proposed in this study were compared. By comparing the results of only global warming potential, the second design alternative using 24MPa concrete was chosen as a better alternative, while the first design alternative using 21MPa concrete was resulted as a better alternative when six impact categories were considered. The results mean that the assessment of various environmental impacts is an appropriate and reasonable approach and the comprehensive assessment offers more reliable results of environmental impacts in the building construction.

• Spatial Information Research
• /
• v.7 no.2
• /
• pp.159-173
• /
• 1999

GIS has been regarded as one of important tools or methodologies for various geoscience applications. Recently, spatial data integration schemes for site-specific or field-specific thematic mapping are newly developed and utilized. However, these kinds of approaches are somewhat insufficient quantitative assessment of integrated layers towards known targets in-detailed . Moreover, GIS analysis scheme is rarely extended to scientific approaches. In this study, simple approach of Multi-Buffer Zone Analysis , related to GIS analystical aspect, is addressed and an actual application for predicting or favorable mapping of mineral occurrences, one of GIS-based geoscientific approaches, is performed, As for geo-processing in GIS itself, this scheme can be regarded as extension or adaptiation of cell-based buffering or proximity analysis to geoscientific data interpretation. This study is based on rationale that surface geological pattern around primitives such as a point, a line, or a polygon in GIS, representing significant geological features, can be efficiently utilized to delineate complex geological behaviors or events, especially handling multiple dta sets originated from multiple sources such as airborne geophysical/radiometric exploration, field survey, and even a classified image of remote sensing. Conclusively, this methodology associated wit GIS is though to be helpful to analyze the spatial pattern of multiple data, pointing given sources, and is expected to effectively utilize for exploratory analysis of cell-based resultant layer integrated with complex or different data sources.

• Sijohaknonchong
• /
• v.44
• /
• pp.165-195
• /
• 2016

This paper is compare to the enjoyment of way on Si-jo and Ga-sa in Lyric poetry. Si-jo and Ga-sa were created in Joseon Dynasty. Si-jo and Ga-sa is the Lyric poetry in traditional genre, representing Korea. These forms include the lyric genre but have a difference between the fixed verse and the long-poem in Joseon Dynasty. However, the two genres are the two genres had opened the possibility of communication from the very beginning in terms of gentry layer is the main writers. Joseon Dynasty those who enjoy the fixed verse and the long-poem, the literature of singing songs and reciting literature, in terms of the principle of metaphor and metonymy rhetoric will reflect the era of awareness and enjoyment of contemporary perception of reality characters. It can be said that performing Si-jo and Ga-sa of enjoyment fashion and work to compare with realistic about the versification principles but check ahead a lot of data, and add to the task of finding a logic that can explain clearly remain. This paper will have to complement the many points made in an attempt to unravel the complex issues in an integrated and comprehensive on-pronged approach and enjoyment of the fixed verse and long-poem Si-jo and Ga-sa and similar expressions are writing and testing the various parties of the enjoyment of culture in today's era of change in the 21st century can be the compass to navigate a new world culture.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.4
• /
• pp.45-54
• /
• 2012

Location-based services with GPS positioning technology as a key technology, but recognizing the current location through satellite communication is not possible in an indoor location-aware technology, low-power short-range communication is primarily made of the study. Especially, as Chirp Spread Spectrum(CSS) based location-aware approach for low-power physical layer IEEE802.15.4a is selected as a standard, Ranging distance estimation techniques and data transfer speed enhancements have been more developed. It is known that the distance measured by CSS ranging has quite a lot of noise as well as its bias. However, the noise problem can be adjusted by modeling the non-zero mean noise value by a scaling factor which corresponds to the change of magnitude of a measured distance vector. In this paper, we propose a localization system using the CSS signal to measure distance for a mobile node taken a measurement of the exact coordinates. By applying the extended kalman filter and least mean squares method, the localization system is faster, more stable. Finally, we evaluate the reliability and accuracy of the proposed algorithm's performance by the experiment for the realization of localization system.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.11-23
• /
• 1997

This paper contains a new approach to blade section design method for marine propellers. The hydrodynamic characteristics of 2-D section are highly influenced by its geometrical parameters i.e., thickness and camber distributions and leading edge radius etc. To consider fully turbulent flow field near 2-D section. the finite volume method with k-${\varepsilon}$ turbulent model which solve Reynolds time averaged Navier-Stokes(RANS) equation is applied. In this study, O-type grid system that can provide many calculation points on blade surface is used. The results were compared with those of the experiment of NACA0012 to confirm the accuracy of the developed codes. The goal of this study is the development of a blade section with high efficiency and low drag. To achieve this, we carried out the tests of lift, drag and cavitation characteristics in cavitation tunnel. The results of experiment were compared with numerical results in order to validate the proposed blades design method. By comparing the numerical results with the experiments, we found that the new blade section, KH28 allows superior performance in efficiency and cavitation avoidance characteristics. We further investigated the blade section design method and an application study of this section, KH28 to apply to the marine propeller. In order to improve the accuracy of numerical results on prediction of lift and drag, we conclude here that the 2-layer boundary model must be used.