• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.168-172
• /
• 2010

The Network-based handover still has problems such as the transmission delays and the packet losses in the case of macro mobility, though technological advances have been made in the wireless and mobile communication. For end-to-end handover, the link bandwidth has been reduced in the wireless network due to its burst errors and congestion control. To overcome such problems, we propose a new scheme of the macro handover according to the protocol layer. The proposed macro handover is implemented on the network layer to partially substitute wired signaling for wireless signaling, to flexibly employ buffers, and on the transport layer to postpone its retransmission time. We have performed extensive simulation using ns-2 and the result shows that our proposed scheme outperforms the other existing schemes in terms of transmission delay, packet loss, and data transfer rate during the handovers.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.469-472
• /
• 2012

Intensity modulated photocurrent spectroscopy and intensity modulated photovoltage spectroscopy were investigated to measure the dynamic response of charge transfer and recombination in the standard, $TiCl_4$-treated and the combined scattering layer electrode dye-sensitized solar cells (DSSCs). IMPS and IMVS provided transit time ($\tau_n$), lifetime ($\tau_r$), diffusion coefficient ($D_n$) and effective diffusion length ($L_n$). These expressions are derived that generation, collection, and recombination of electrons in a thin layer nanocrystalline DSSC under conditions of steady illumination and with a superimposed small amplitude modulation. In this experimental, IMPS/IMVS showed that the main effect of $TiCl_4$ treatment is to suppress the recombination of photogenerated electrons, thereby extending their lifetime. And the Diffusion coefficient of combined scattering layer electrode is $6.10{\times}10^{-6}$ higher than that of the others, resulting in longer diffusion length.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.2 s.233
• /
• pp.220-227
• /
• 2005

In this study, stress-displacement analytic solutions are obtained by a shear lag modeling method constructed for the spliced joint area with a splicing gap in the fiber metal laminate (FML). This gap can be empty or be filled with an adhesive material of elastic modulus $E_a$. Two splicing types are considered for spliced shear models, one for spliced in the center metal layer, the other for spliced in the outer metal layer. It is shown that from the viewpoint of the load transfer efficiency and the avoidability of disbond generation due to the shear and axial stresses at the interface between metal layer and composite layer of the gap-front in the spliced area, the center spliced type (k=2) is much preferable to the outer spliced type (k=1).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.212.1-212.1
• /
• 2015

본 연구에서는 용액 공정을 통해 제작한 IGZO 박막 트랜지스터의 Active layer를 적층 구조로 쌓아올리고, 신뢰성 평가를 위해 Gate에 지속적인 바이어스를 인가함으로써 소자의 문턱 전압 변화를 측정 실험을 진행하였다. Active layer 제작에 사용된 용액의 비율은 In:Zn:Ga = 1:1:30%로 제작되었고, 단일층부터 이중, 삼중층까지 적층을 하였다. 각 소자의 Active layer 층이 많아질수록 이동도가 1.21, 0.87, 0.69 ($cm^2/Vs$)으로 감소하는 등의 전기적 특성이 감소하는 경향을 보였다. 하지만 Gate에 10 V를 3000초간 지속적으로 인가해주었을 때 문턱 전압의 변화가 단일층일 때 10.4 V에서 삼중층일 때 1.3 V로 감소하였다. 이것은 Active layer의 층 사이의 계면이 형성되면서 current path에 영향을 주어 전기적 특성이 감소하였지만, 적층으로 인한 surface의 uniformity가 향상되는 것으로 확인하였다. 또한 1500초에서 Dit (Interface Trap Density)를 추출한 결과, 단일층에서는 $7.53{\times}10^{12}$($cm^{-2}-1$<)로 삼중층에서 $4.52{\times}10^{12}$($cm^{-2}-1$<)의 약 두 배 정도 높게 추출되었다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.89-91
• /
• 2007

In order to decrease the degradation of phosphor on anode, many kinds of methods try to do coating of phosphor powders and AI metal layer of anode phosphor, In case of direct coating of phosphor powder, thin and uniform coating process are difficult to cover homogeneous in the surface of phosphor powders and given rise to decrease the brightness, Anti-reflection-layer(ARC) with $TiO_2$, $Al_2O_3$, $Y_2O_3$ showed 103[%] the enhancement of brightness in comparable with normal phosphor layer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1405-1414
• /
• 2014

The office management service platform configured with office's sensor devices, G/DSCL(Gateway/Device Service Capability Layer), NSCL(Network Service Capability Layer), and NA(Network Application). In this paper, we designed gateway resource tree and service scenario to fit the office management service and demonstrated appropriate operation of the office management service through intelligent functional modeling.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.4
• /
• pp.323-326
• /
• 2009

We have developed blue-emitting phosphorescent organic light emitting diodes (OLEDs) using 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) and tris (8-quinolinolato)aluminum ($Alq_3$) electron transport layers. As blue dopant and host materials, bis[(4,6-di-fluorophenyl)-pyridinate-N,C2']picolinate (FIrpic) and N,N'-dicarbazolyl-3,5-benzene (mCP) were used, respectively. The driving voltage, current efficiency and emission characteristics of devices were investigated. While the driving voltage was about $1{\sim}2$ V lower in the device with an $Alq_3$ layer, the current efficiency was about 66 % higher in the device with BCP electron transport layer. the blue phosphorescent OLED with BCP layer exhibited higher purity of color, resulting from a relatively weak electroluminescence intensity at 500 nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.346.2-346.2
• /
• 2014

To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

• The Journal of Korea Robotics Society
• /
• v.11 no.3
• /
• pp.140-145
• /
• 2016

In this paper, we fabricate arrayed-type flexible capacitive touch sensor using liquid metal (LM) droplets (4 mm spatial resolution). Poly-4-vinylphenol (PVP) layer is used as a dielectric layer on the electrode patterned Polyethylene naphthalate (PEN) film. Bonding tests between hydroxyl group (-OH) on the PVP film and polydimethylsiloxane (PDMS) are conducted in a various $O_2$ plasma treatment conditions. Through the tests, we can confirm that non-$O_2$ plasma treated PVP layer and $O_2$ plasma treated PDMS can make a chemical bond. To measure dynamic range of the device, one-cell experiments are conducted and we confirmed that the fabricated device has a large dynamic range (~60 pF).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.2
• /
• pp.93-99
• /
• 1998

Parabolic approximation and sponge layer are applied as open boundary condition for elliptic finite difference wave model. Generalized conjugate gradient method is used as a solution procedure. Using parabolic approximation a large part of spurious reflection is removed at the spherical shoal experiment and sponge layer boundary condition needs more than 2 wave lengths of sponge layer to give similar results. Simulating the propagation of waves on a rectangular harbor, it is identified that iterative scheme can be applied easily for the non-rectangular computational region.