• Journal of Magnetics
• /
• v.2 no.3
• /
• pp.96-100
• /
• 1997

A spin valve structure of NiO(40 nm)/Co(2 nm)/Cu(2.6 nm)/Co(x nm)/Ta(5 nm) has been investigated for the application of magnetic random access memory (MRAM). The spin valve structure exhibited very large difference in the coercivities between pinned and free layers, a relatively high GMR ratio, and a low free layer coercivity. The spin valves were prepared by sputtering and were characterized by dc 4-point probe, and VSM. The spin valves with combined free layer exhibited a maximun GMR ratio of 10.4% with a free layer coercivity of about 82 Oe. The spin valves with a single 10 nm thick a-CoNbZr free layer exhibited a GMR ratio of about 4.3% with a free layer coercivity of about 12 Oe. The GMR ratio of the spin valves increased by addition of Co between Cu and a-CoNbZr. It has been confirmed that the coercivity of free layer can be decreased by increasing the thickness of a-CoNbZr. It has been confirmed that the coercivity of free layer can be decreased by increasing the thickness of a-CoNbZr layer without losing the GMR ratio substantially, which was mainly due to high resistivity of the amorphous "layers".

• Journal of Acupuncture Research
• /
• v.38 no.2
• /
• pp.159-164
• /
• 2021

Background: Cupping is widely used in Korean medicine, but there is a risk of bacterial infection if the suction pump (used for inducing negative pressure) and the patients' skin are not separated. This study aimed to investigate the effect of layer cupping by comparing the pressure changes between layer cupping and conventional cupping. Methods: To evaluate pressure changes the study was designed with 3 types of conditions applied to a skin model: (1) a Dongbang cup with a manual or motor suction pump (conventional cupping); (2) layer cupping with 2 Dongbang cups; and (3) layer cupping with a cup made by 3D printing and a Dongbang cup. Results: When a manual suction pump was used (conventional cupping), the pressure did not decrease steadily, and in 1 section there was an increase in pressure. When layer cupping was used, the pressure in the lower cup (which would be directly applied to the patient's skin), decreased steadily. Conclusion: In the pressure change graph for layer cupping in this skin model, the pressure in the lower cup (which would be placed on the patient's skin) steadily decreased, and reached equilibrium. Therefore, the layer cupping model may help to reduce the risks of bacterial infection.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.172-177
• /
• 2022

The quench voltage of the second-generation superconducting wire is affected by the resistivity characteristics of the stabilization layer. The specific resistance of the stabilization layer can be changed by the deposition process using RF magnetron sputtering. In this paper, a thin film made of a homogeneous material (Ag) and a dissimilar material (Cu) was deposited on the stabilization layer of the second-generation superconducting wire through RF magnetron sputtering. We found that the specific resistance was reduced by increasing the thickness of the stabilization layer. The reduction in the resistivity of the stabilization layer led to a decrease in the quench voltage of the second-generation superconducting wire. We suggest that various characteristic changes of the second-generation superconducting wire can be expected through the successful change in the resistivity of the stabilization layer of the proposed deposition process.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.719-726
• /
• 2002

In this paper, we present a layered watermarking technique for digital audio data that is capable of detecting timing change and adapting complexity in detection. The proposed watermarking uses echo hiding as the first layer, which enables the detector to estimate linear speed change. The spread spectrum watermark is then inserted in the second layer which includes additional information like copyright data. We use two kinds of sequences in the second layer, one of which is for synchronization and the other is for data. The results of previous layer are used to make estimate of timing change in the next layer. The detector in the presented method can select detecting range form the first layer to the first layer, second pre-layer, or second main-layer due to the required system specification. Experimental results show that the proposed watermarking technique is robust to several processing attacks including timing change.

• Journal of Korea Foundry Society
• /
• v.2 no.3
• /
• pp.2-15
• /
• 1982

In this study, the influenced of graphite shape on the boriding of cast iron and boride structure was investigated. Gray cast iron, ferritic and pearlitic ductile cast iron were borided at 750,850,900 and $950^{\circ}C$ for 1,3 and 5 hours by powder pack method with the mixture of $B_4C_9\;Na_2B_4O_7$, $KBF_4$ and Shc. The boride layer was consisted of FeB(little), $Fe_2B$ (main) and graphite. Some possibility of the existence of unknown Fe-B-C compound in the boride layer was suggested. And precipitates in the diffusion zone was $Fe_3(B,C)$. The concentration of Si and precipitation of $Fe_3(B,C)$ in the ${\alpha}$ layer raised the hardness of this Zone. The depth and hardness of boride layer increased with the increase of treating temperature and tim. But high temperature (over $950^{\circ}C)$ caused pore at graphite position and long treating time (5hrs) sometimes caused formation of graphite layer beneath the boride layer. So, for the practical application of borided cast iron, treating in short time and at low temperature was recommended. And for ductile cast iron, ferritizing or pearlitizing heat treatment was seemmed to be possible at the same time with boriding. The graphite in the boride layer was deeply concerned with the qualitx and characteristics of the boride layer. And it greatly influenced on the shape of the boride phase, structure of the boride layer. Generally speaking, the existance of graphite restrained the growth of the boride phase. But the boundary between the gsaphite and the matrix acted as the shortcut of boron diffusion. So, for gray cast iron, the graphite layed length-wise led the formation of boride layer.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.535-542
• /
• 2002

The purpose of this study was to evaluate the effect of EDTA irrigant according to application time and temperature. 31 human mature extracted teeth with a single canal were sectioned with microtome in 3mm thickness and gained 62 samples of root canals. They were distributed randomly into 6 groups of 10 specimens each and control group of 2 specimens. Each specimen was prepared with GT rotary file (Dentsply, Maillefer Co., Swiss) and irrigated with 3 ml sodium hypochlorite every minute. Then smear layer was removed with EDTA solution (PULPDENT$^{\circledR}$, PULPDENT Co., USA.) except two control specimens. Specimens of each group were irrigated with 17% EDTA. The time and temperature of application were as follows : (Table omitted) All specimens were split longitudinally and prepared for examination by scanning electron microscopy. A set of reference micrographs was used to award a debris score as follows: 0 = no smear layer, all tubules clean and open; 1 = no superficial smear layer, tubule openings visible, but some contain debris plug or soft tissue remnants: 2 = moderate smear layer, some tubules open and others closed; 3 = heavy smear layer, most/all tubule openings obscured. Results were evaluated with Kruskal-Wallis test to determine whether there was statistically significant difference among six groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Mann-Whitney test. The results were as follows : 1. Control specimens showed heavy smear layer at the canal walls 2. Among the groups applied with EDTA for 2 minutes, group 1 showed the heaviest smear layer, and there was statistically significant difference between group 1 and the other groups(p<0.05). 3. Among the groups applied with EDTA for 5 minutes, group 4 and group 6 showed smear layer but there was no significant difference between them. 4. Among the groups applied with EDTA for the same temperature, group 1 showed heavier smear layer than group 4, and there was statistically significant difference(p<0.05). 5. Among the groups applied with EDTA for the same temperature, group 2 showed heavier smear layer than group 5 and group 3 showed heavier smear layer than group 6. But there was no statistically significant difference among them. From the results above, it could be concluded, EDTA solution is effective in removing of smear layer when it is applied for 5 minutes. If EDTA is applied for 2 minutes, it should be applied above room temperature.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.2
• /
• pp.77-84
• /
• 2012

This study suggested the planting model of Zelkova serrata communities in the areas with the warmth index of both 80~100 and $100{\sim}120^{\circ}C{\cdot}month$. Warmth index was calculated with 449 weather points using inverse distance weighted interpolation method. The planting species were selected by correlation analysis between Z. serrata and each species of four or more frequency among the 36 relev$\acute{e}$ surveyed for this study. The result of this study is summarized as follows : Warmth index of Z. serrata communities was among $74{\sim}118^{\circ}C{\cdot}month$. Results of the correlation analysis between Z. serrata and each species observed that the Z. serrata belongs to the tree layer with warmth index of 80~100 and $100{\sim}120^{\circ}C{\cdot}month$. On the other hand, the species of Carpinus laxiflora, Quercus serrata, Prunus sargentii and Platycarya strobilacea appeared only in the tree layer with warmth index of $80{\sim}100^{\circ}C{\cdot}month$. Z. serrata and Styrax japonica appeared in the subtree layer with the warmth index of 80~100 and $100{\sim}120^{\circ}C{\cdot}month$, while Acer pseudosieboldianum, Lindera erythrocarpa, Acer mono, Quercus serrata, etc. appeared in the subtree layer with the warmth index of $80{\sim}100^{\circ}C{\cdot}month$. Z. serrata, Ligustrum obtusifolium, Lindera obtusiloba, Callicarpa japonica and Zanthoxylum schinifolium all appeared in the shrub layer with the warmth index of 80~100 and $100{\sim}120^{\circ}C{\cdot}month$. Lindera erythrocarpa, Orixa japonica, Staphylea bumalda, Akebia quinata and Sorbus alnifolia appeared in the shrub layer with the warmth index of $80{\sim}100^{\circ}C{\cdot}month$ and Styrax japonica and Stephanandra incisa appeared in the shrub layer with the warmth index of $100{\sim}120^{\circ}C{\cdot}month$, The numbers of each species planted in a $100m^2$ area of the Z. serrata community were suggested as follows : five in tree layer, five in subtree layer and nine in shrub layer. The average area of canopy are suggested to be about $86m^2$ for tree layer, $34m^2$ for subtree layer and $34m^2$ for shrub layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.432.1-432.1
• /
• 2016

We demonstrated that the power conversion efficiency (PCE) of bilayer solar cell was significantly enhanced by inserting interfacial layer between the organic bilayer film and the Al electrode. Moreover, the water contact angle shows that the bilayer solar cells suffer from the undesirable surface component which limits the charge transport to the Al electrode. The AFM measurement has revealed that the pre- and post-thermal annealing treatments results in different morphologies of the interfacial layer which is critical for the higher PCE of the bilayer solar cells. Furthermore we have investigated the electrical properties of the bilayer solar cells and obtained insights into the detailed device mechanisms. The transient photovoltage measurements suggests that the significantly enhanced Voc is caused by reducing the recombination at the interface between the organic films and the Al electrode. By inserting the TiO2 layer between the bilayer film and Al electrode, the open circuit voltage (Voc) was increased from 0.37 to 0.66V. Consequently, the power conversion efficiency (PCE) of bilayer solar cells was significantly enhanced from 1.23% to 3.71%. As the results, the TiO2 interfacial layer can be used to form an ohmic contact layer, serveing as a blocking layer to prevent the penetration of the Al, and to reduce the recombination at the interface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.204.2-204.2
• /
• 2015

산화물 반도체는 비정질임에도 불구하고 높은 이동도를 나타내며, 적은 누설 전류, 낮은 소비전력, 저온 공정 가능, 가시광선 영역에서 투명한 성질을 가지고 있다. 이와 같은 다양한 장점들로 인해 산화물 반도체를 이용한 트랜지스터는 차세대 플랫 패널 디스플레이 적용에 있어서 핵심 기술로 각광받고 있다. 한편, 소자의 크기가 점점 더 작아짐에 따라 고집적화에 따른 scaling down은 항상 언급되는 이슈이다. 이와 관련하여 소자의 높은 on current는 트랜지스터를 더 작게 구현할 수 있다는 가능성을 보여준다. 따라서 현재 소자의 on current를 높이기 위해서 소자의 구조를 변형하는 연구가 활발히 진행되고 있다. 본 연구에서는 소자의 on current를 높이기 위한 방법으로 ITO buried layer를 이용한 산화물 반도체 pseudo 트랜지스터를 제작하였다. 먼저 채널을 형성하기 전에 ITO buried layer를 형성시켜준 후, 채널 영역으로서 InGaZnO (2:1:1)를 용액 공정을 이용하여 형성시켰다. 이어서 소자의 전기적 특성 향상을 위해 마이크로웨이브 열처리를 1800 W에서 2분간 실시하였다. 또한 대조군으로 ITO buried layer를 갖지 않는 소자를 같은 방법으로 제작하여 평가하였다. 그 결과 ITO buried later를 갖는 소자에서 대조군과 비교하여 높은 on current를 나타냄을 확인하였다. 이와 같은 결과는 낮은 저항의 ITO buried layer가 current path를 제공함과 동시에 더 두꺼운 채널 층을 형성시켜 높은 on current에 기여하기 때문이다. 결과적으로 ITO buried layer를 갖는 소자 구조를 이용함으로써 고성능 트랜지스터를 제작하여 소자를 집적화 함에 있어서 유망한 소자가 될 것으로 예상된다.

• Ocean Science Journal
• /
• v.42 no.4
• /
• pp.241-246
• /
• 2007

Northern Arabian Sea (NAS) between $17^{\circ}N-20.5^{\circ}N$ and $59^{\circ}E-69^{\circ}E$ was observed by using Argo float daily data fur about 9 months, from April 2002 through December 2002. Results showed that during April - May mixed layer shoaled due to light winds, clear sky and intense solar insolation. Sea surface temperature (SST) rose by $2.3^{\circ}C$ and ocean gained an average of 99.8 $Wm^{-2}$. Mixed layer reached maximum depth of about 71 m during June - September owing to strong winds and cloudy skies. Ocean gained abnormally low $\sim18Wm^{-2}$ and SST dropped by $3.4^{\circ}C$. During the inter monsoon period, October, mixed layer shoaled and maintained a depth of 20 to 30 m. November - December was accompanied by moderate winds, dropping of SST by $1.5^{\circ}C$ and ocean lost an average of 52.5 $Wm^{-2}$. Mixed layer deepened gradually reaching a maximum of 62 m in December. Analysis of surface fluxes and winds suggested that winds and fluxes are the dominating factors causing deepening of mixed layer during summer and winter monsoon periods respectively. Relatively big]h correlation between MLD, net heat flux and wind speed revealed that short term variability of MLD coincided well with short term variability of surface forcing.